公司概况  >>更多
公司简介
公司动态
公司证书
翻译服务 >>更多
笔译
口译
同声传译
本地化国际化
语言整体解决方案
翻译价格 >>更多
翻译价格
行业解决方案
化工翻译
浦传翻译优势
旅游行业
汽车行业
业务团队 >>更多
业务团队
 
资源共享  

所在位置:首页 > 资源共享 > 法国NF标准07


法国NF标准07

点击次数:43910次

NF T51-006-1957 塑料.可溶于甲醇的聚苯乙烯物质的测定? (PLASTICS. DETERMINATION OF METHANOL-SOLUBLE POLYSTYRENE.)
NF Z83-580-5-1998 蜂窝式数字通信系统(阶段2).全速语音服务.第5部分:全速语音通信信道的不连续传输(GSM 06.31) (Digital cellular telecommunications system (Phase 2). Full rate speech. Part 5 : discontinuous transmission (DTX) for full rate speech traffic channel (GSM 06.31).)
NF U02-015/A1-1999 修改件1 ()
NF X50-001-6-2-1998 发电站设备的采购指南.第6-2部分:涡轮机附件.回水加热器 (Guide for procurement of power station equipment. Part 6-2 : turbine auxiliaries. Feedwater heaters.)
NF T43-117-1994 粗橡胶或硫化化合物.生坯强度测定 (Raw rubber or unvulcanized compounds. Determination of green strength.)
NF S96-204-1997 造口术收集袋.第2部分:要求和试验方法? (Ostomy collection bags. Part 2 : requirements and test methods.)
NF P98-440-1-1998 道路限制系统.第1部分:试验方法用术语和总标准 (Road restraint systems. Part 1 : terminology and general criteria for test methods.)
NF S99-509-1999 医疗装置的生物评定.第9部分:潜在降解产品鉴定和量化框架 (Biological evaluation of medical devices. Part 9 : framework for identification and quantification of potential degradation products.)
NF S96-301-1999 残疾人用技术辅助器具.一般要求和试验方法 (Technical aids for disabled persons - General requirements and test methods.)
NF T66-046-1999 沥青和沥青粘合剂.用真空毛细管法测定动粘滞度 (Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary.)
NF A51-201-1998 铜和铜合金.一般用途的板材、薄板、带材和圆材 (Copper and copper alloys - Plate, sheet, strip and circles for general purposes.)
NF L21-418-2001 航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度标称沉头的实心铆钉 (Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA2601, passivated, inch based series.)
NF Z84-113-1999 无线电设备和系统.地面移动设备.用于数据(和语言)传输和有一个天线连接器的无线电设备的技术特性和试验条件 (Radio Equipment and Systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and having an antenna connector.)
NF Z82-136-1995 集成服务数字网络(ISDN).独立用户组的增补服务.服务说明 (Integrated Services Digital Network (ISDN). Closed user group (cug) supplementary service. Service description.)
NF T43-105-1994 橡胶.灰份的测定 (Rubber. Determination of ash.)
NF V26-006-1982 脱水蔬菜.脱水大蒜.挥发性有机硫成分的测定 (Dehydrated vegetables. Dehydrated garlic. Determination of volatile organic sulfur compounds.)
NF Z82-046-3-1998 集成服务数字网络(ISDN).初始比率通道.安全和防护.第3部分:界面 IA.安全 (Integrated Services Digital Network (ISDN). Primary rate access. Safety and protection. Part 3 : interface Ia. Protection.)
NF U14-303-1992 农业机械.环形六角皮带和滑轮槽剖面 (Agricultural machinery. Endless hexagonal belts and groove sections of corresponding pulleys.)
NF Z70-601-1-1993 信息技术.开放系统互联.ACSE协议的一致性测试组.第1部分:测试组结构和测试作用 (Information technology. Open systems interconnection. Conformance test suite for the ASCE protocol. Part 1 : test suite structure and test purposes.)
NF X20-111-1999 天然气.示踪分析用导则 (Natural gas. Guidelines to traceability in analysis.)
NF D62-100-2-1999 家具.家用固定板夹层床.安全要求和试验.第2部分:试验方法 (FURNITURE. DOMESTIC USE FIXED PLATFORM MEZZANINE BEDS. SAFETY SPECIFICATIONS AND TESTS. PART 2 : TEST METHODS.)
NF E75-501-1974 砖瓦工用的圆平面刮刀(普通型) (ROUND TROWELS FOR MASONS.)
NF F11-005-1969 铁路车辆.压缩空气制动装置. 维修车间鉴定牌 (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE EQUIPMENT. MAINTENANCE WORK-SHOP IDENTIFICATION BADGES.)
NF F51-002-1971 铁路固定设备.F 51枕木枕木扒钉 (FIXED RAILWAY INSTALLATIONS.S CRAMP-IRONS FOR SPLIT WOODEN SLEEPERS.)
NF V37-044-2001 环境烟草烟雾.可呼吸悬浮颗粒的评价.通过荧光和超挥发吸收测定颗粒物质 (Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence.)
NF G52-010-2003 皮革.物理和机械试验.厚度的测定 (Leather - Physical and mechanical tests - Determination of thickness.)
NF S92-022-2004 体外诊断医疗装置.生物样品的定量测量.校准仪和控制材料所赋酶的催化浓度值的计量溯源性 (In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control m)
NF Z87-019-1-3-2003 固定无线电系统.环境工程(EE).电信设备的环境条件和环境试验.第1-3部分:环境条件的分类.在有气候保护的场所 (Fixed Radio Systems - Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-3 : classification of environmental conditions - Stati)
NF F37-022-1968 铁路车辆.“ 盐酸“ 类罐车. 直径为50mm和80mm的力排空圆顶盖 (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS HYDROCHLORIC ACID TYPE. DOME COVER FOR PRESSURE DISCHARGE (50 MM AND 80 MM DIAMETER).)
NF E90-300-1978 旋转频率在10-200转/秒时的机器的机械振动.评定标准制定的基准 (MECHANICAL VIBRATION OF MACHINES WITH ROTATIONAL FREQUENCIES FROM 10 S-1 TO 200 S-1. BASIS FOR SPECIFYING EVALUATION STANDARDS.)
NF T70-519-2003 国防用高能材料.安全性、易损性.带可燃外壳的直径90mm机炮推进装置的技术数据文献 (Energetic materials for defense - Safety, vulnerability - Technical data document of the diameter 90 mm gun propellant vehicle with an inflammable skirt.)
NF P98-117-1991 路面层.粗砂.火山灰.石灰.定义.混合物.分类 (ROAD FOUNDATIONS. POZZOLANA AND LIME BOUND GRANULAR MATERIAL. DEFINITION. COMPOSITION. CLASSIFICATION.)
NF C48-327-1996 报警系统.安全操作用CCTV监视系统.第7部分:操作指南 (ALARM SYSTEMS. CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS. PART 7 : APPLICATION GUIDELINES. (EUROPEAN STANDARD EN 50 132-7).)
NF T47-265-2002 塑料软管.含水材料抽吸和排放用螺旋热塑增强热塑性软管.规范 (Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.)
NF S92-016-2001 专用试管诊断仪的使用说明 (Instructions for use for in vitro diagnostic instruments for professional use.)
NF S95-161-1998 肺换气机.第3部分:急救和输送换气机的特殊要求 (Lung ventilators. Part 3 : particular requirements for emergency and transport ventilators.)
NF Z83-577-1997 蜂窝式数字通信系统(阶段2).无线电传输和接收(GSM 05.05) (Digital cellular telecommunications system (Phase 2). Radio transmission and reception (GSM 05.05).)
NF E62-305-1977 机床构造标准部件,多轴头.防护装置.半边垫圈 (MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. TEMPLATES : HALF-WASHER.)
NF Z83-554-1997 蜂窝式数字通信系统(阶段2).数据链路层.一般特性(GSM 04.05) (Digital cellular telecommunications system (Phase 2). Data Link (DL) layer. General aspects (GSM 04.05).)
NF T72-501-1997 化学消毒剂和防腐剂.消毒洗手液.试验方法和要求(第2阶段/第2步) (Chemical disinfectants and antiseptics. Hygienic handwash. Test method and requirements (phase 2/step 2).)
NF S77-115-2001 个人的眼睛保护.向下滑雪时用的护目器 (Personal eye-protection - Ski goggles for downhill skiing.)
NF C93-537-3-2-2001 通信电缆.试验方法规范.第3-2部分:机械试验方法.抗张强度和导线弹性 (Communication cables - Specifications for test methods - Part 3-2 : mechanical test methods - Tensile strength and elongation for conductor.)
NF V04-157-2004 乳和乳制品.抗菌剂残留物检测用免疫分析或受体检测的标准化描述指南 (Milk and milk products - Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues.)
NF X31-002-2-1999 土壤质量.词汇.第2部分:取样的相关术语和定义 (Soil quality. Vocabulary. Part 2 : terms and definitions relating to sampling.)
NF C93-537-4-14-2003 通信电缆.试验方法规范.第4-14部分:环境试验方法.闪电 (Communication cables - Specifications for test methods - Part 4-14 : environmental test methods - Lightning.)
NF T76-307-1998 皮革和制鞋材料用胶粘剂.溶剂胶和分散胶粘剂.特定条件下测量粘结强度的试验方法 (ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS. SOLVENT-BASED AND DISPERSION ADHESIVES. TEST METHODS FOR MEASURING THE BOND STRENGTH UNDER SPECIFIED CONDITIONS. (EUROPEAN STANDARD EN 1392).)
NF L21-322-1993 航空航天系列.铆钉,固体,100级常规有园顶的扩钻头,铝合金2117A,英寸系列(EN 2551) (AEROSPACE SERIES. RIVETS, SOLID, 100 DEGREES NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES. (EUROPEAN STANDARD EN 2551).)
NF L10-301-1989 航空和航天系列.钛和钛合金的干喷沙处理 (AEROSPACE SERIES. DRY ABRASIVE BLASTING OF TITANIUM AND TITANIUM ALLOYS. (EUROPEAN STANDARD EN 2497).)
NF E62-309-1977 机床构造标准部件.多轴头.28和36立式防护装置.支架:导套,盖和弹簧 (MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. VERTICAL TEMPLATES 28 AND 36. SUPPORTS : COVER,GUIDE AND SPRING.)
NF P98-256-1-1991 路面试验.沥青混合料的试验.细粉吸收性能的测定 (TESTS RELATING TO PAVEMENTS. TESTS ON CONSTITUANTS OF BITUMINOUS MIXTURES. PART 1 : DETERMINATION OF FINES PARTICULES ABSORBING CAPACITY.)
NF B20-104-1985 矿物纤维绝缘产品.矿毡、垫子和矿棉板.透气性的测定 (MINERAL BASED INSULATING PRODUCTS. MINERAL WOOLFELTS,MATTRESSES AND PANELS. DETERMINATION OF AIR PERMEABILITY.)
NF E51-005-2003 工业风机.风机振动的测量方法 (Industrial fans - Method of measurement of fan vibration.)
NF S10-128-2003 光学和光学仪器.激光和激光相关设备.激光器的寿命 (Optics and optical instruments - Lasers and laser-related equipments - Lifetime of lasers.)
NF C42-130/A1-1989 NF C 42-130-1989的补充1 ()
NF Z83-530-1996 蜂窝式数字通信系统(阶段2).补充业务的技术实现(GSM 03.12) (Digital cellular telecommunications system (phase 2). Technical realization of supplementary services (GSM 03.12).)
NF C23-5202-1986 NF C23-520-82的补充2 ()
NF A81-352-2000 焊条.高强度钢的气体保护电弧焊用管状有心电焊条.分类 (Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of high strength steels - Classification.)
NF M88-734-2003 液化石油气储气罐(LPG)的容量量规 (Contents gauges for LPG tanks.)
NF Z83-525-1996 欧洲蜂窝式数字通信系统(阶段2).恢复程序(GSM 03.07) (European digital cellular telecommunications system (phase 2). Restoration procedures (GSM 03.07).)
NF C32-0201-1988 补充1 ()
NF Z83-512-1996 蜂窝式数字通信系统(阶段2).呼叫进行指示程序(GSM 02.40) (Digital cellular telecommunications system (phase 2). Procedure for call progress indications (GSM 02.40).)
NF S90-612-1989 轮椅.第10部分:电动轮椅攀越障碍物能力的测定 (Wheelchairs. Part 10 : determination of obstacle-climbing ability of electric wheelchairs.)
NF Z82-060-1994 集成服务数字网络(ISDN).附加地址增补服务.适用范围和信息流动 (Integrated Services Digital Network (ISDN). Subaddressing (sub) supplementary service. Functional capabilities and information flows.)
NF E52-076-1975 龙门架.总则.术语 (CROSSCRANES. GENERALITIES. TERMINOLOGY.)
NF E37-101-1-1998 往复式内燃机.安全.第1部分:压缩内燃机 (RECIPROCATING INTERNAL COMBUSTION ENGINES. SAFETY. PART 1 : COMPRESSION IGNITION ENGINES. (EUROPEAN STANDARD EN 1679-1).)
NF E49-004-2-1998 液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第2部分:内径由20MM-100MM的双反应气缸. (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 2 : DOUBLE ACTING CYLINDERS, BORES FROM 20 MM TO 100 MM.)
NF P31-204-2-1996 DTU 40-23.建筑工程.私人合同.粘土制的平板砖屋顶.第2部分:特殊条款 (DTU 40-23. BUILDING WORKS. PRIVATE CONTRACTS. ROOF COVERING MADE OF CLAY PLAIN ROOFING TILES. PART 2 : SPECIAL CLAUSES.)
NF C72-213/A5-1995 NF EN 60662-1993的修改5 ()
NF H44-006-1988 烟雾发生器.压力分配用铝和铝合金容器(气雾剂容器型)与膨胀管联系的底部尺寸公差 (AEROSOL DISPENSERS. CONTAINERS IN ALUMINIUM AND ALLOYS. TOLERANCES OF THE FUNDAMENTAL DIMENSIONS IN CONNECTION WITH THE CLINCH.)
NF E65-202-1989 木材产品和同类产品用的圆片锯半固定机器.预防机械原因引起的事故 (SEMI-FIXED CIRCULAR SAWING MACHINES FOR WOOD AND SIMILAR MATERIALS. PREVENTION OF ACCIDENTS OF MECHANICAL ORIGIN.)
NF T73-050-1969 表面活性剂.科学分类 (SURFACE ACTIVE AGENTS. SCIENTIFIC CLASSIFICATION.)
NF F54-005-1973 铁路固定设备.信号装置.钢索传动.85mm滑轮用的夹头 (FIXED RAILWAY INSTALLATIONS. SIGNALLING. WIRE TRANSMISSIONS. SHACKLES FOR 85 MM PULLEYS.)
NF E56-003-1-2002 地下采矿用机械.液压矿顶支撑物的安全要求.第1部分:支撑物设施的一般要求 (Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1 : support units and general requirements.)
NF C47-732-2002 家用和类似用途的自动电控制设备.第2-2部分:电动机热保护器的特殊要求 (Automatic electrical controls for household and similar use - Part 2-2 : particular requirements for thermal motor protectors.)
NF R14-709-2003 道路车辆.运输信息和控制系统的工效学.驾驶时适用性的评定规程 (Road vehicles - Ergonomic aspects of transport information and control systems - Procedure for assessing suitability for use while driving.)
NF C93-132-1978 电子元件.固定电容器.温度系数不确定的陶瓷介质固定电容器(II型).一般规定 (COMPONENTS FOR ELECTRONIC EQUIPMENT. FIXED CERAMIC CAPACITORS (TYPE II). GENERAL REQUIREMENTS.)
NF E54-001-1-2002 飞行器地面支持设备.一般要求.第1部分:基本安全要求 (Aircraft ground support equipment - General requirements - Part 1 : basic safety requirements.)
NF T34-555-8-1998 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第8部分:新工艺和维修规范的制定 (Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 8 : development of specifications for new work and maintenance.)
NF B53-663-1999 托盘和包装用木材的质量分级 (Quality classification of timber used in pallets and packaging.)
NF T90-370-1999 水质.取样.第16部分:样本生物试验指南? (Water quality. Sampling. Part 16 : guidance on biotesting of samples.)
NF G35-054-2-2001 铺地织物.实验室土壤试验.第2部分:转鼓试验 (Textile floor coverings - Laboratory soiling tests - Part 2 : drum test.)
NF T90-351-1994 水质.生物取样法.水生海底大型无脊椎动物的手网取样指南 (Water quality. Methods of biological sampling. Guidance on handnet sampling of aquatic benthic macro-invertebrates.)
NF E63-056-1974 压力机配套工具.密封导环 (PRESS TOOLS.FIXED GUIDE BUSH.)
NF E09-080-1-1994 机械的安全.减少机械产生的有害物质对健康造成危害.机械制造商的原则和规范 (SAFETY OF MACHINERY. REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY. PART 1 : PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS. (EUROPEAN STANDARD EN 626-1).)
NF F38-002-1971 铁路运输设备.采用最大压力为2.5bar排空的散粉状产品运输用气动排空车.散粉导管用统一接头 (RAILWAY TRANSPORT EQUIPMENT. WAGONS WITH PNEUMATIC DISCHARGE FOR CARRYING POWDER GOODS IN BULK. DISCHARGE AT MAXIMUM SERVICE PRESSURE OF 2.5 BARS.)
NF P98-818-7-2003 沥青混合物.热搅沥青混合料的试验方法.第7部分:用Υ射线测定沥青样品的体密度 (Bituminous mixtures - Test methods for hot mix asphalt - Part 7 : determination of bulk density of bituminous specimens by gamma rays.)
NF A89-010-7-1995 金属材料焊接程序的规范和认可.第七部分:使用电弧焊标准接程序进行认可 (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 7 : APPROVAL BY A STANDARD WELDING PROCEDURE FOR ARC WELDING. (EUROPEAN STANDARD EN 288-7).)
NF E90-110-1978 现场平衡仪器.说明和特性 (FIELD BALANCING EQUIPMENT. DESCRIPTION AND EVOLUATION. FTH:LABORATORY METHODS IN ANECHOIC AND SEMI-ANECHOIC ROOMS.)
NF L21-314-1993 航空航天系列.铆钉,固体.通用头,铝合金2017A,英寸系列(EN 2146) (AEROSPACE SERIES. RIVETS, SOLID, UNIVERSAL HEAD, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES. (EUROPEAN STANDARD EN 2146).)
NF A89-240-1987 焊接和有关技术.电阻点焊、凸焊或缝焊搭接接头.带解释的缺陷分类 (WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.)
NF E64-520-1973 圆锯刀片轴的直径 (WOODWORKING MACHINES - SPINDLE DIAMETERS FOR CIRCULAR SAW BLADES)
NF C73-80051-1992 家用和类似用途电器的安全.第1部分:一般规则 ()
NF Z83-508-1996 蜂窝式数字通信系统(阶段2).国际移动站设备识别(IMEI)(GSM. 02.16) (Digital cellular telecommunications system (phase 2). International mobile station equipment identities (IMEI) (GSM 02.16).)
NF C73-804/A2-2001 家用及类似用途电器的安全性.第2-4部分:螺旋提取机的特殊要求 (Safety of household and similar electrical appliances - Part 2-4 : particular requirements for spin extractors.)
NF E63-509-2-2001 铸模工具.定位环状物.第2部分:在小型或中型模子中无镶嵌隔热板的定位环状物.C型和D型 (Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - Types C and D.)
NF Z83-575-1997 数字蜂窝式电信系统(2).信道编码(GSM 05.03) (Digital cellular telecommunications system (phase 2). Channel coding (GSM 05.03).)
NF H35-006-1994 玻璃容器.以容器底作基准的瓶口高度和不平行性.试验方法 (GLASS CONTAINERS. HEIGHT AND NON-PARALLELISM OF FINISH WITH REFERENCE TO CONTAINER BASE. TEST METHODS. (EUROPEAN STANDARD EN 29009).)
NF C64-133/A1-1995 NF EN 60265-2-1993的修改1 ()
NF S91-170-1996 牙科学.牙科用医疗装置.仪器 (Dentistry. Medical devices for denstistry. Instruments.)
NF C73-2211-1989 C 73-221-85的修改1 ()
NF C73-8272-1993 家用及其类似用途电器的安全.第2部分第27节:家用紫外和红外皮肤处理设备的特殊要求.IEC 335-2-27修改件1-89 ()
NF T75-003-1956 香精油.取样一般规则 (ESSENTIAL OILS. GENERAL RULES FOR SAMPLING.)
NF C93-332-1980 电子元件.电信或专用电子设备用变压器和感应线圈.一般规定 (ELECTRONIC COMPONENTS. TRANSFORMERS AND INDUCTORS FOR TELECOMMUNICATION AND PROFESSIONAL ELECTRONIC EQUIPMENT. GENERAL REQUIREMENTS.)
NF T60-215-1961 动物脂肪和植物脂肪.润滑工业油酸氧化试验(MACKEY试验) (ANIMAL AND VEGETABLE FATS. OXIDIZABILITY TEST OF TECHNICAL OLEIC ACIDS FOR OILING (MACKEY TEST).)
NF E49-004-1-1998 液压动力.10bar气缸.袖珍系列,缩小冲程.尺寸互换性.第1部分:内径由20MM-63MM的信号反应气缸. (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS, COMPACT SERIES, REDUCED STROKE, INTERCHANGEABILITY DIMENSIONS. PART 1 : SINGLE ACTING CYLINDERS, BORES FROM 20 MM TO 63 MM.)
NF C93-618-3-2002 质量评定的石英晶体装置.第3部分:标准外形线和引线接头 (Quartz crystal units for assessed quality - Part 3 : standard outlines and lead connections.)
NF F01-041-1972 铁路车辆.手柄. 外形尺寸. 安装 (RAILWAY TRANSPORT EQUIPMENT. HANDLES - GAUGES - FIXINGS.)
NF C86-901-1985 电子元件.CENELEC质量保证体系.集成电路发射器和(或)接收器.特殊规范 (HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. INTEGRATED LINE TRANSMITTERS AND/OR RECEIVERS. BLANK DETAIL SPECIFICATION. (CECC 90 301).)
NF L06-829-1988 航空和航天.喷丸.无铁棕刚玉 (AEROSPACE INDUSTRY. BLAST MEDIA. ALUMINIUM OXIDE.)
NF C93-354-2003 磁性零件有效参数的计算 (Calculation of the effective parameters of magnetic piece parts.)
NF T60-302-1954 肥皂.实验室用肥皂块取样的制备 (SOAPS. PREPARATION OF SOAP CAKE SAMPLES FOR THE LABORATORY.)
NF C93-802-4-2003 光纤放大器.第4部分:多信道应用.性能规范模板 (Optical amplifiers - Part 4 : multichannel applications - Performance specification template.)
NF C52-112-4-1995 最高电压不超过36KV设备用50HZ,50--2500KVA三相油浸配置变压器.第4部分:带有非正弦电流的变压器的电功率的 (THREE-PHASE OIL-IMMERSED DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 TO 2500 KVA WITH HIGHEST VOLTAGE FOR EQUIPMENT NOT EXCEEDING 36 KV. PART 4 : DETERMINATION OF THE POWER RATING OF A TRANSFORMER LOADED WITH NON-SINUSOIDAL CURRENTS.)
NF T54-113-1971 塑料.薄膜.薄膜平展性的检验 (PLASTICS MATERIALS. THIN SHEET. INSPECTION OF THE EVENNESS.)
NF H00-006-2003 包装.单元包装.提花纹显示钉板的尺寸和要求 (Packaging - Unit packaging - Dimensions and requirements for pegboard display.)
NF C73-889-2003 家用和类似电器的安全.第2-89部分:带组合式或遥控致冷剂冷凝装置或压缩机的商用制冷用具的特殊要求 (Household and similar electrical appliances - Safety - Part 2-89 : particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compres)
NF F74-122-1-1999 铁路设施.固定设备.第1部分:与电气安全和接地有关的防护设备 (Railway applications - Fixed installations - Part 1 : protective provisions relating to electrical safety and earthing.)
NF S91-140-1998 牙周刮匙、牙科刮除器和牙钻孔器.第4部分:牙钻孔器.盘形 (Periodontal curettes, dental scalers and excavators. Part 4 : dental excavators. Discoid-type.)
NF Z87-829-1999 电磁兼容性和无线电频谱(ERM).为全球海难(GMDSS)和安全系统提供低位速率数据通信(LBDRC)1.5/1.6GHZ波段下操 ()
NF B10-630-2003 天然石料的测试方法.用热冲击测定耐老化能力 (Natural stones test methods - Determination of resistance to ageing by thermal shock.)
NF X50-738-2003 旅游服务.旅行社和旅游经营人员.术语 (Tourism services - Travel agencies and tour operators - Terminology.)
NF E48-640-1973 液压传动用流体.难燃流体使用须知 (FLUIDS FOR HYDRAULIC POWER SYSTEMS-DIRECTIONS FOR USE OF FIRE-RESISTANT FLUIDS)
NF C93-813-1987 光导纤维互联装置和无源元件.光纤和电缆连接件的分规范.CF05型 (FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. SECTIONAL SPECIFICATION OF CONNECTORS FOR OPTICAL FIBRES AND CABLES. TYPE CF05.)
NF T58-112-1971 金属表面涂层.塑料涂层.剥离法检验附着力 (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. ADHESION TEST.)
NF E75-507-1974 粉刷工用的宽方头刮刀(粗抹) (SQUARE TROWELS WITH A WIDE EXTREMITY FOR PLASTERERS.)
NF T51-078-1993 塑料.125mm火源用试样的燃性测定 (Plastics. Determination of the combustibility of specimens using a 125 mm flame source.)
NF C20-733-2000 环境试验.第2部分:试验.温度变化试验指南 (Environmental testing - Part 2 : tests - Guidance on change of temperature tests.)
NF X43-246-1-2000 工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第1部分:一般要求和试验方法 (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1 : general requirements and test methods.)
NF X50-765-1998 电信.由无线电电话安装工程技术人员交付使用的无线电电话和车载服务 (Telecommunications. Radiotelephone and car. Service delivered by the radiotelephone installation engineers.)
NF P61-606-1998 瓷砖粘结剂.混凝土粘结剂拉伸粘接强度的测定 (Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives.)
NF T90-113-3-1998 水质.汞的测定.汞齐化浓缩法 (WATER QUALITY. DETERMINATION OF MERCURY. ENRICHMENT METHODS BY AMALGAMATION. (EUROPEAN STANDARD EN 12338).)
NF R33-601-1970 自行车和摩托车用电灯泡 (ELECTRIC BULBS FOR CYCLES AND MOTOR CYCLES.)
NF L55-516-1966 带“KOLLSMAN”灯座和T 11/4灯泡的小型灯.(RECH.) (MINIATURE LAMP WITH “KOLLSMAN“ CAP AND T 11/4 BULB. (RECH.).)
NF C61-5035-1996 具有检验互换性和安全性量规的灯头和灯座.第3部分:量规.修改件5 ()
NF U30-012-1978 收割机具.甜菜收割机.说明卡片.标准样式 (HARVESTING EQUIPMENT. EQUIPMENT FOR HARVESTING SUGAR-BEET. RECORD CARDS. STANDARD LAYOUT.)
NF Z44-005-2-1998 信息和文献.书目参考.电子文献或其部分 (INFORMATION AND DOCUMENTATION. BIBLIOGRAPHIC REFERENCES. PART 2 : ELECTRONIC DOCUMENTS OR PARTS THEREOF.)
NF G60-005-1977 鞋.长和宽的等级系统(使用MONDOPOINT系统).男式鞋 (SHOE SIZES.GRADING SYSTEM FOR GIRTH AND WIDTH MEASUREMENTS (FOR USE WITH THE MODOPOINT SYSTEM).MEN`S TOWN SHOES.)
NF P21-211-1993 木梯.规范 (WOODEN STAIRS. SPECIFICATIONS.)
NF S76-061-2003 呼吸设备.使用压缩的硝基气体和氧气的开路自主式潜水仪.要求、试验、标记 (Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking.)
NF P26-101-1956 五金.锁.定义.分类.名称 (HARDWARE. LOCKS. DEFINITIONS. CLASSIFICATION. DESIGNATION.)
NF Z85-407-1998 传输和多路转换(TM).在55GHz左右操作的模拟视频信号和数字信号传输用的数字无线电继电系统(DRRS)参数 (Transmission and Multiplexing (TM). Parameters for digital radio relay systems (DRRS) for the transmission of digital signals and analogue video signals operating around 55 GHz.)
NF Z87-831-1999 电磁兼容性和无线电频谱(ERM).1.6/2.4GHZ和2GHZ频率波段下操作的卫星个人通信网(S-PCN)内使用的海上移动地 (Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) used within Satellite Personal Communications Networks (S-PCN) operating in the 1,6/2,4 GHz and 2 GHz frequency bands.)
NF J95-031-1997 小型船舶.汽油发动机和/或汽油罐防水船舱的通风 (Small craft. Ventilation of petrol engine and/or petrol tank compartments.)
NF X15-118-1996 空气湿度的测量.湿度计.特征 (Measurement of air moisture. Psychrometers. Characteristics.)
NF P24-504-2000 未增塑聚氯乙烯纤维门窗的外形.耐人工气候老化性测定 (Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering.)
NF R17-102-1987 道路车辆.运输车辆.功率输出轴和功率接受传动装置间的连接 (Road vehicles. Commercial vehicles. Couplings between power take-offs (pto) and ancillary driven units.)
NF R14-602-2000 道路车辆.安全玻璃材料.机械试验 (Road vehicles - Safety glazing materials - Mechanical tests.)
NF T58-202-3-2000 焊接固定常压热塑性槽罐.第3部分:单层壁的长方形槽罐的设计和计算 (Welded static non-pressurised thermoplastic tanks - Part 3 : design and calculation for single skin rectangular tanks.)
NF C61-503/A24-2001 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规 (Lamps caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges.)
NF T58-202-2-2000 焊接固定常压热塑性槽罐.第2部分:立式圆柱形槽罐的计算 (Welded static non-pressurised thermoplastic tanks - Part 2 : calculation of vertical cylindrical tanks.)
NF X11-522-1998 工业用金属织物.技术要求和试验 (Industrial wire screens. Technical requirements and testing.)
NF V04-053-1988 奶制品和奶基食品.维泊尔-伯尔恩卓重量法测定脂肪含量(参照法).第3部分:特殊情况冰混含物 (Milk products and milk-based foods. Determination of fat content by the weibull-berntrop gravimetric method (reference method). Part 3 : special cases.)
NF E15-034-2000 工业压力计.金属指示压力计.差压计 (Industrial pressure gauges - Metallic pressure gauge indicators - Differential gauges.)
NF E35-404-2-2000 制冷系统和热泵.安全和环境要求.第2部分:设计,结构,试验,标记和存档 (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2 : design, construction, testing, marking and documentation.)
NF Z69-501-1999 信息技术.健康帮助社会福利机构识别结构 (Information technology. Structure for organization`s identification of health aid social welfare.)
NF T47-208/A1-2000 橡胶软管.外皮抗磨性的测定 (Rubber hoses - Determination of abrasion resistance of the outer cover.)
NF T90-375-1998 水质.淡水海藻假梯形藻(月牙藻羊角)次头状生长抑制时水慢性毒性的测定 (Water quality. Determination of water chronic toxicity by growth inhibition of the fresh water algae Pseudokirchneriella subcapitata (Selenastrum Capricornutum).)
NF E48-065-3-2000 一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第2部分:带金属对金属密 (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B).)
NF Z62-501-1-2000 信息技术.国际标准化轮廓FCSnnn.基于ISO/IEC 2022的字节8-bit编码结构.第1部分:FCS111-2022 选项1 (Information technology - International Standardized Profiles FCSnnn - Character set 8-bit code structure based on ISO/IEC 2022 - Part 1 : FCS 111 - 2022 Option 1.)
NF T30-018-1999 涂料和清漆.水蒸气渗透率的测定.第1部分:无涂层用碟法 (Paints and varnishes. Determination of water-vapour transmission rate. Part 1 : dish method for free films.)
NF C93-464-4-2000 电子设备的机械结构.482.6mm(19.in)系列机械结构的尺寸.第4部分:辅助支架和插入式部件的辅助尺寸 (Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4 : subracks and associated plug-in units - Additional dimensions.)
NF T90-013-1993 水质.亚硝酸盐的测定.分子吸收光谱测定法 (Water quality. Determination of nitrite. Molecular absorption spectrometric method.)
NF S31-030-2-2000 声学和振动.弹性元件振动声学传输性能的实验室测量.第2部分:平移运动用弹性支架的动态劲度.直接法 (Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2 : dynamic stiffness of elastic supports for translatory motion - Direct method.)
NF S91-160-1996 牙科学.牙科用医疗装置.牙科植入物 (Dentistry. Medical devices for dentistry. Dental implants.)
NF C61-602/A1-1972 家用和类似用途的辅助部件.组合辅助部件 (ACCESSORIES FOR DOMESTIC AND SIMILAR PURPOSES. COMPOSITE ACCESSORIES.)
NF P43-035-2000 建筑阀门.供水减压阀和复合供水减压阀.要求和试验 (Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests.)
NF Z83-540-1997 蜂窝式数字通信系统(阶段2).GSM公共地面移动网络(PLMN)系统中语音服务的传输规划特征(GSM 03.50) (Digital cellular telecommunications system (Phase 2). Transmission planning aspects fo the speech service in the GSM Public Land Mobile Network (PLMN) system (GSM 03.50).)
NF F01-047-1974 铁路车辆.热弯或冷弯钢板弹簧.板簧片 (RAILWAY TRANSPORT EQUIPMENT. HOT OR COLD FLANGED COACH SPRINGS. SPRING LEAVES.)
NF U02-022-1999 农业机械.旋转式割草机和甩刀式割草机.安全 (Agricultural machinery. Rotary mowers and flail-mowers. Safety.)
NF Z84-682-1999 无线电设备和系统(RES).现场传呼设备用电磁兼容性(EMC)标准 (Radio Equipment and Systems (RES). ElectroMagnetic Compatibility (EMC) standard for On-Site Paging equipment.)
NF Z87-019-22-1995 设备工程.通讯工程的环境条件和环境试验.第2-2部分:环境试验的规范.运输 (Equipment engineering (ee). Environmental conditions and environmental tests for telecommunication equipment. Part 2-2 : specification of environmental tests. Transport.)
NF S91-114-2001 无菌、一次性牙科用注射针头 (Sterile dental injection needles for single use.)
NF Z84-454-1999 无线电设备和系统(RES).宽频带音频链路.技术特征和试验方法 (Radio Equipment and Systems (RES). Wide band audio links. Technical characteristics and test methods.)
NF T51-023-1999 塑料.密胺甲醛树脂模制件.可提取甲醛含量的测定 (Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.)
NF P25-503-2000 百叶窗,内部和外部遮蔽物.错用.试验方法 (Shutters, external and internal blinds - Misuse - Test methods.)
NF S97-002-2001 一次性医疗手套.第2部分:物理性能的要求和检验方法 (Medical gloves for single use - Part 2 : requirements and testing for physical properties.)
NF H34-026-2000 塑料鼓形桶.标称容量为20-120升的非移动头环形十字交叉鼓形桶 (Plastics drums - Non-removable head (light head) cicular cross-section drums with a nominal capacity of 20 I to 120 I.)
NF Q50-019-2-2000 纸浆.物理试验用实验室纸张的制备.第2部分:快速Koethen法 (Pulps - Preparation of laboratory sheets for physical testing - Part 2 : Rapid-Koethen method.)
NF C75-315-2000 手提式电动工具安全性.第2-15部分:树篱修剪机的特殊要求 (Safety of hand-held electric motor operated tools - Part 2-15 : particular requirements for hedge trimmers.)
NF D90-215-1998 羽毛和绒毛.术语和定义 (Feather and down. Terms and definitions.)
NF C73-817-2000 家用和类似用途电器的安全.第2-17部分:电热毯、电暖垫和类似柔软加热用具的特殊要求 (Safety of household and similar electrical appliances - Part 2-17 : particular requirements for blankets, pads and similar flexible heating appliances.)
NF E51-723-2001 建筑物通风.空气终端装置.排代流设施的空气动力试验和额定值 (Ventilation for buildings - Air terminal devices - Aerodynamic testing and rating for displacement flow applications.)
NF X43-246-2-2000 工作场所空气.有毒气体和蒸汽的直接浓缩测量和直接测量的电气装置.第2部分:用于测量限定值范围内的电气装置 (Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2 : performance requirements for apparatus used for me)
NF C44-107-2000 电量测量.抄表、电费和负荷控制的数据交换.第31部分:带有载波信令的双绞线局域网的使用 (Electricity metering - Data exchange for meter reading, tarif and load control - Part 31 : use of local area networks on twisted pair with carrier signalling.)
NF X41-046-1996 自胶粘带.在固化过程中热固性胶粘带粘合性的测量 (Self adhesive tapes. Measurement of bonding of thermosetting adhesive tapes during curing.)
NF F11-014-1970 铁路车辆.压缩空气制动装置. 直通式自动制动连接头 (RAILWAY TRANSPORT EQUIPMENT. AIR BRAKE. DIRECT BRAKE COUPLING HEAD.)
NF C31-001-2000 特种绕组线规范.第0部分:一般要求.第1节:漆包圆铜线 (Specifications for particular types of winding wires - Part 0 : general requirements - Section 1 : enamelled round copper wire.)
NF G62-301-2000 鞋.外鞋帮的试验方法.撕扯分开强度和耐起层性的测定 (Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance.)
NF T20-171-1986 生产铝用碳质材料.电极用沥青.焦化值测定 (Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of coking value.)
NF T47-205-1993 橡胶和塑料软管.静态条件下的耐臭氧性试验的评定 (Rubber and platics hoses. Assessment of ozone resistance under static conditions.)
NF C73-214/A1-2003 家用和类似用途的电烤箱.性能的测量方法 (Electric toasters for household and similar purposes - Methods of measuring the performance.)
NF Z82-047-5-1998 集成服务数字网络(ISDN).基本通道.安全和防护.第5部分:界面IB.防护 (Integrated Services Digital Network (ISDN). Basic access. Safety and protection. Part 5 : interface Ib. Protection.)
NF A89-551/A1-2002 焊缝的无损检验.焊缝的磁粉检验.验收等级 (Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels.)
NF X42-106-1997 生物技术.大比例法和生产.与相关危险等级相应的建筑物 (Biotechnology. Large-scale process and production. Plant building according to the degree of hazard.)
NF S90-606-1989 轮椅.第3部分:刹车效果的测定 (Wheelchairs. Part 3 : determination of effiency of brakes.)
NF T66-021-1999 沥青和沥青粘合剂.测定沥青乳液的颗粒极性 (Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions.)
NF S97-150-2-2000 体温计.第2部分:相变型(点矩阵)温度计 (Clinical thermometers - Part 2 : phase change-type (dot matrix) thermometers.)
NF E29-303-1-2000 阀门.阀体、阀盖和阀套用材料.第1部分:欧洲标准中规定的钢 (Valves - Materials for bodies, bonnets and covers - Part 1 : steels specified in European Standards.)
NF T60-101-1998 原油和液体石油产品.密度的实验室测定.密度计法 (Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method.)
NF X44-014-1-1998 高效气体过滤器(HEPA和ULPA).第1部分:分类、性能试验和作标记 (High efficiency air filters (HEPA and ULPA). Part 1 : classification, performance testing, marking.)
NF Z82-187-1994 集成服务数字网络(ISDN).三元增补服务.适用范围和信息流动 (Integrated Services Digital Network (ISDN). Three-party (3PTY) supplementary service. Functional capabilities and information flows.)
NF A51-305-1998 铜和铜合金.一般用途型材和矩形棒材 (Copper and copper alloys - Profiles and rectangular bar for general purposes.)
NF X02-201-1993 空间和时间的量和单位 (Quantities and units. Space and time.)
NF T90-320-3-1999 水质.有关光发射水样品的抑制效果的测定(发光细菌试验).第3部分:使用冻干细菌法 (Water quality. Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test). Part 3 : method using freeze-dried bacteria.)
NF P61-604-1998 瓷砖粘结剂.湿润能力的测定 (Adhesives for tiles. Determination of wetting capability.)
NF Z85-630-1998 传输和多路转换(TM).在1,4GHz频率带内操作的低容量点对点数字无线电继电系统(DRRS) (Transmission and Multiplexing (TM). Low capacity point-to-point Digital Radio-Relay Systems (DRRS) operating in the 1,4 GHz frequency band.)
NF E62-212-1976 机床构造标准部件.多轴头.螺纹端单钻床主轴 (UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE THREADED END DRILLING SPINDLES.)
NF Z84-086-1999 无线电设备和系统.地面移动设备.最初用于模拟语言的带内部或外部RF连接器的无线电设备的技术特性和试验条件 (Radio Equipment and Systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech.)
NF X50-001-4-3-1999 发电站设备的采购指南.第4部分:锅炉附件.第3节:通风设备 (Guide for procurement of power station equipment. Part 4 : boiler auxiliaries. Section 3 : draught plant.)
NF L21-417-2001 航空航天系列.耐腐蚀钢FE-PA11制钝化英制100度标称沉头的实心铆钉 (Aerospace series - Rivets, solid, 100 o countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series.)
NF C73-881-2000 家用和类似用途电器的安全.第2-81部分:使脚保暖的装置及加热垫的特殊要求 (Safety of household and similar electrical appliances - Part 2-81 : particular requirements for foot warmers and heating mats.)
NF S77-107/A2-2001 人眼防护.工业用遮光过滤镜 (Personal eye protection - Sunglare filters for industrial use.)
NF C61-502/A22-2001 灯头、灯座及检验其互换性和安全性的量规.第2部分:灯座 (Lamps caps and holders together with gauges for the control of interchangeability and safety - Part 2 : lampholders.)
NF Z83-572-1998 数字蜂窝通信系统(相2).非结构补充服务数据(USSD).第3步(GMS 04.90) (Digital cellular telecommunications system (Phase 2). Unstructured Supplementary Service Data (USSD). Stage 3. (GSM 04.90).)
NF T51-201-1998 塑料.液态树脂.比重计法测定比重 (Plastics. Liquid resins. Determination of density by the pyknometer method.)
NF S56-112/A1-2001 休闲住宿车辆.假期家用旅居挂车.与健康和安全有关的居住要求 (Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety.)
NF T54-939-1998 塑料管道系统.热塑塑料配件.组装配件的机械拉伸强度或柔韧性的试验方法 (Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.)
NF C65-101/A1-2000 电涌放电器.第4部分:交流系统用无火花间隙的金属氧化物电涌放电器 (Surge arresters - Part 4 : metal-oxide surge arresters without gaps for a.c. systems.)
NF U25-521-1998 森林机械.背负式固定燃机动力源的便携手提灌木切割机和杂草修剪机.安全要求和试验 (Machinery for forestry. Portable hand-held brush-cutters and grass-trimmers with backpack-mounted combustion-engine power source. Safety requirements and testing.)
NF C93-462/A1-1981 NF C 93-462-1981的补充件1 ()
NF S77-107/A1-2000 人员眼睛的保护.工业用阳光过滤器 (Personal eye protection - Sunglare filters for industrial use.)
NF E37-102-3-2000 往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第3部分:用在可燃灰尘环境下的II组发 (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3 : group II engines for use in flammable dus)
NF T30-406-1998 涂料和清漆用粘合剂.聚异氰酸盐树脂.试验的一般方法 (Binders for paints and varnishes. Polyisocyanate resins. General methods of test.)
NF C93-620-5-1-2000 经质量评定的石英晶体振荡器.第5-1部分:空白详细规范.鉴定批准 (Quartz crystal controlled oscillators of assessed quality - Part 5-1 : Blank detail specification qualification approval.)
NF C86-613/A1-1981 NF C 86-613-1981补充件1 ()
NF C73-220/A1-2003 家用电煮咖啡机的性能测量方法 (Methods for measuring the performance of electric household coffee makers.)
NF C23-581-2-1-2000 用于存在易燃灰尘的电气装置.第2-1部分:试验方法.测定灰尘最低燃烧温度的试验方法 (Electrical apparatus for use in the presence of combustible dust - Part 2-1 : test methods - Methods for determining the minimum ignition temperatures of dust.)
NF E49-330-1-2000 气流动力.压缩空气调节器和过滤器调节器.第1部分:包括在供应商和产品标记要求内的的主要特性 (Pneumatic fluid power - Compressed air regulators and filters-regulators - Part 1 : main characteristics to be included in literature from suppliers and product-marking requirements.)
NF E65-100-11-2000 手持非电动工具.安全要求.第11部分:毛坯下料机和剪切机 (Hand-held non-electric power tools - Safety requirements - Part 11 : nibblers and shears.)
NF S91-248-2000 牙科基板/造型蜡 (Dental baseplate/modelling wax.)
NF E11-017-1996 产品几何量技术规范(GPS).长度测量仪表.标准线.规范.试验方法 (Geometrical product specification (gps). Length measuring instruments. Standard wires. Specifications. Test methods.)
NF T73-403-1999 表面活性剂.从环氧乙烷中得到的非离子表面活性剂浊点的测定 (Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide.)
NF E66-074-1977 莫氏锥柄铰孔钻 (MORSE TAPER SHANK CORE DRILLS.)
NF V37-047-2004 环境中的烟草烟雾.空气中蒸气态烟碱和3-乙烯基吡啶的测定.气相色谱法 (Environmental tobacco smoke - Determination of vapour phase nicotine and 3-ethenylpyridine in air - Gas-chromatographic method.)
NF E29-303-2-2000 阀门.阀体、阀盖和阀套用材料.第2部分:欧洲标准中没有规定的钢 (Valves - Materials for bodies, bonnets and covers - Part 2 : steels other than those specified in European Standards.)
NF R14-210-1987 道路车辆.环形箱内控制仪表.嵌入直径和刻度型式 (Road vehicles. Check instruments with circular case. Recess diameters and gradations types.)
NF T34-555-3-1998 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第3部分:设计上的考虑 (Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Part 3 : design considerations.)
NF Z13-702-1995 EDI.电文.卫生/植物检疫证书. (EDI. Message. Sanitary/phytosanitary certificate (SANCRT).)
NF Z83-561-1998 数字蜂窝式电信系统(2).在可移动无线电界面上(GSM 04.13)的性能要求 (Digital cellular telecommunications system (Phase 2). Performance requirements on the mobile radio interface (GSM 04.13).)
NF T60-203-1999 动植物脂肪和油.碘值的测定 (Animal and vegetable fats and oils. Determination of iodine value.)
NF E11-151-2003 产品几何量技术规范(GPS).三维门座测量仪.几何校正值的表示 (Geometrical Products Specifications (GPS) - Three-dimensional portal measuring machine - Representation of geometry corrections.)
NF E51-310-1989 空气压缩机.规范和试验 (COMPRESSED AIR DRYERS. SPECIFICATIONS AND TESTS.)
NF Z84-224-1999 电磁兼容性和无线电频谱(ERM).现场传呼业务.包括试验方法在内的现场传呼系统的技术和功能特性 (Electromagnetic compatibility and Radio spectrum Matters (ERM). On-site paging service. Technical and functional characteristics for on-site paging systems, including test methods.)
NF X50-001-6-3-1998 发电站设备的采购指南.第6-3部分:涡轮机附件.压缩工厂 (Guide for procurement of power station equipment. Part 6-3 : turbine auxiliaries. Condenser plant.)
NF Z82-108-1995 综合服务数字网络(ISDN).电路方式64千位/秒无限制8kHz结构化载体服务类型.服务描述 (Integrated Services Digital Network (ISDN). Circuit-mode 64 kbit/S unrestricted 8 kHz structured bearer service category. Service description.)
NF E04-505-5-1998 技术产品文献.文字书写.第5部分:拉丁字母、数字和标志的CAD写法 (Technical product documentation. Lettering. Part 5 : CAD lettering of the Latin alphabet, numerals and marks.)
NF C63-112-2000 低压开关设备和控制设备.第4-2部分:接触器和电动机起动器.交流半导体电动机控制器和起动器 (Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - A.C. semiconductor motor controllers and starters.)
NF V09-003-1-1993 感官分析.鉴定员的选择、培训和监督的通用指南.第1部分:鉴定员的选择 (Sensory analysis. General guidance for the selection, training and monitoring of assessors. Part 1 : selected assessors.)
NF X50-001-5-4-1998 动力站设备的征购指南.第5-4部分:涡轮机.液压涡轮机.储存泵和泵涡轮机 (Guide for procurement of power station equipment. Part 5-4 : turbines. Hydraulic turbines, storage pumps and pump-turbines.)
NF T90-313-1995 水质.含水介质中不易溶解在水中的有机化合物生物可降解性后期评估的处理和制备指南 (Water quality. Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium.)
NF P31-302/A1-2000 不连续铺设的粘土屋面瓦.产品定义和规范 (Clay roofing tiles for discontinuous laying - Products definitions and specifications.)
NF A49-876-2000 钢管的无损检验.1级和2级无损检验人员的资格和能力 (Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel.)
NF E37-102-1-2000 往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第1部分:用在可燃气体和蒸气环境的II (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1 : group II engines for use in flammable gas)
NF P84-206-2-1995 DTU 43.3.建筑工程.带有防水涂层的有槽金属板屋顶.第2部分:特殊条款 (DTU 43.3 - Building works - Grooved sheet metal roofing with waterproof coating - Part 2 : special clauses.)
NF P78-344-2000 建筑玻璃.玻璃弯曲强度的测定.第4部分:U型玻璃试验 (Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass.)
NF A49-875-2-2000 钢管的无损检验.第2部分:检验液压密封性用无缝和焊接奥氏体和奥氏体铁素体钢管(埋弧焊除外)的自动涡流试验 (Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of)
NF D14-508-1985 卫生设备.搪瓷耐家用化学药品和污点的强度.试验方法 (Sanitary appliances. Resistance to domestical chemical agents and resistance to stains of the enamelled surfaces. Test method.)
NF C59-100-2000 原电池组.第1部分:总则 (Primary batteries - Part 1 : general.)
NF A81-056-2000 焊条.焊接及有关工艺用焊条的生产、供应和分配的质量要求 (Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes.)
NF X05-050-2000 图形符号.对空间选址和阅读浏览有困难的所有人开放的服务设施和产品的鉴定.欢迎,帮助辅助设备和检查步骤用 (Graphical symbols. Identification of services and products open to all persons with difficulties in spatio-temporal location and in reading learning. Welcoming, help assistant and accessibility symbol)
NF P84-206-1-1995 DTU 43.3.建筑工程.带有防水涂层的有槽金属板屋顶.第1部分:技术条款 (DTU 43.3 - Building works - Grooved sheet metal roofing with waterproof coating - Part 1 : technical clauses.)
NF X10-121-1993 封闭管道中流体流量的测量.液体电磁流量计的性能评定法 (Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.)
NF S54-012-1998 带小桌板的椅子.安全技术要求和试验方法 (Table mounted chairs. Safety requirements and test methods.)
NF C73-850/A1-1993 NF EN 60335-2-50-1992的修改1 ()
NF T45-172-1994 橡胶工业原料.炭黑.丁二烯苯乙烯橡胶混合物中炭黑质量的评定 (Raw materials for the rubber industry. Carbon black. Evaluation of the quality of the carbon black in a styrene-butadiene based mixture.)
NF A05-411-2000 金属材料抗腐蚀性防护.大气环境中腐蚀的可能性.大气环境中腐蚀性的分类、确定和评价 (Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments.)
NF A51-126-1-2001 铜和铜合金.空气调节和制冷用无缝圆形铜管.第1部分:管道系统用管 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 1 : tubes for piping systems.)
NF T66-035-1999 沥青和沥青粘合剂.可觉察到的特性的表征 (Bitumen and bituminous binders - Characterization of perceptible properties.)
NF S91-223-2001 牙科学.弹性印模材料 (Dentistry - Elastomeric impression materials.)
NF Z84-341-1999 无线电设备及系统(RES).地面移动设备.使用整体式天线向接收机初始特定响应区发送信号的无线电设备的技术特 (Radio Equipment and Systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver.)
NF Z13-695-1995 EDI.信息.退休金保险纳费通知(SUPCOT) (EDI. Message. Superannuation contributions advice message (SUPCOT).)
NF V08-020-1994 食品微生物学.推测为埃希氏肠杆菌计数的一般规定.最可靠的计数技术 (Microbiology. General guidance for enumeration of presumptive {Escherichia} {coli}. Most probable number technique.)
NF X42-140-1999 生物工程.离心的性能标准(EN 12884) (Biotechnology. Performance criteria for centrifuges.)
NF U51-433-2-1999 灌溉技术.滚筒机系统.第2部分:滚筒机用聚乙烯管规范 (Irrigation techniques - Reel machine systems - Part 2 : specifications of polyethylene tubes for reel machines.)
NF E31-404-2/A1-2002 非家用多燃烧器燃气式架空辐射管加热器系统.第2部分:E系统安全 (Multi-burner gas-fired overhead tube heater systems for non-domestic use - Part 2 : system E, safety.)
NF G32-316-1987 服装业.服饰品.已知负荷时松紧带伸长度的测定方法 (CLOTHING. ACCESSORIES. DETERMINATION OF THE ELONGATION OF PLASTIC BANDS UNDER SPECIFIED LOAD.)
NF F55-681-1996 铁路固定设备.退火铜裸导线 (RAILWAY FIXED EQUIPMENT. ANNEALING COPPER BARE CONDUCTORS.)
NF T54-110-1971 塑料.薄膜.不脆化常规极限温度测定.(扣环冲击) (PLASTICS. THIN SHEETS. DETERMINATION OF PLIABILITY LIMIT TEMPERATURE.(LOOPED TEST PIECE IMPACT TEST).)
NF T90-004-2002 水质.氟离子的测定.电位计法 (Water quality - Determination of fluoride ion - Potentiometric method.)
NF T31-013-1972 涂料.铬酸锶基颜料 (STRONTIUM CHROMATE PIGMENTS.)
NF X43-049-1999 空气质量.悬浮颗粒物质PM10分数的测定.验证测量方法参考等效值的参考方法和现场试验过程 (Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods.)
NF T54-914-1-2000 建筑物内污物和污水排放(低、高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系统规 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th)
NF C93-584-2-2-2000 射频同轴电缆组件.第2-2部分:柔性同轴电缆组件空白详细规范 (Radio frequency and coaxial cable assemblies - Part 2-2 : blank detail specification for flexible coaxial cable assemblies.)
NF A37-603-1-2001 钢丝和丝产品.钢丝上的有机涂层.第1部分:一般规则 (Steel wire and wire products - Organic coatings on steel wire - Part 1 : general rules.)
NF U14-405-1997 农用拖拉机.器具用液压动力 (Agricultural tractors. Hydraulic pressure for implements.)
NF S81-525-2000 钟表业.防震手表 (Horology - Schock-resistant watches.)
NF X10-203-1999 工业电扇.射流风扇的性能试验 (Industrial fans - Performance testing of jet fans.)
NF L21-272-2000 紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的100°埋头锁紧螺栓 (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF P36-411-1-2000 地上外部用塑料雨水管道系统.第1部分:非塑化聚氯乙烯(PVC-U)管道系统.第1部分:管,配件和系统规范 (Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the system.)
NF M50-009-2000 燃气供应系统.最大工作压力达(和包括)16巴的燃气管道.功能要求 (Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements.)
NF A82-150-1987 电阻焊接多点焊接机用无外壳千斤顶.一般规范 (Electric resistance welding. Pneumatic cylinders without liners for multiple spot welding machines. General specifications.)
NF A91-104-2000 金属覆层和其它无机物覆层.有关厚度测量的定义和惯例 (Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness.)
NF T66-012-1999 沥青和沥青粘合剂.溶解度的测定 (Bitumen and bituminous binders - Determination of solubility.)
NF P23-303-1984 木制通道内平面门.规范 (Wooden interior connecting doors. Specifications.)
NF C74-208-2000 医用电气设备.医用电子加速器.功能特性 (Medical electrical equipment - Medical electron accelerators - Functional performance characteristics.)
NF K19-098-2000 金融交易卡.采用集成电路卡的金融交易系统的安全结构.第8部分:通则和总论 (Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 8 : general principles and overwiew.)
NF B35-796-3-2000 实验室玻璃器皿.瓶.第3部分:吸气瓶 (Laboratory glassware - Bottles - Part 3 : aspirator bottles.)
NF P12-002-2001 圬工单位的试验方法.第2部分:集成混凝土圬工设施中空隙面积百分比的测定(纸刻痕法) (Specification for masonry units - Part 2 : calcium silicate masonry units.)
NF C93-840-1987 电子元件.光导纤维过渡总规范 (ELECTRONIC COMPONENTS. GENERIC SPECIFICATION FOR OPTICAL FIBRES.)
NF Z82-054-1994 集成服务数字网络(ISDN).终端便携性增补服务.适用范围和信息流动 (Integrated Services Digital Network (ISDN). Terminal portability (tp) supplementary service. Functional capabilities and information flows.)
NF T60-265-2001 动植物脂肪和油.粗脂肪和原油中沉积物的测定.离心法 (Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method.)
NF S61-937-2-2003 防火安全系统.安全操作设备.第2部分:可自动关闭的双开弹簧门 (Fire safety systems - Operated safety systems - Part 2 : Automatic closing swing doors.)
NF X07-020-1999 测量中的不确定性的表达指南(ENV 13005) (Guide to the expression of uncertainly in measurement.)
NF Z84-175-7-1998 无线电设备和系统.数字增强非线圈电信(DECT).常规界面(CI).第7部分:应急特性 (Radio Equipment and Systems (RES). Digital Enhanced Cordless Telecommunications (DECT). Common Interface (CI). Part 7 : security features.)
NF E31-354-6-2000 采暖锅炉.第6部分:带有强制通风燃烧器的采暖锅炉.带有标准热输入功率不超过70kV的自动燃油炉的分节锅炉的民 (Heating boilers - Part 6 : heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat in)
NF T94-111-2000 人类饮用水处理用化学品.铝基絮凝剂.分析法 (Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods.)
NF H60-005-2000 包装.在包装和包装废弃物领域使用的欧洲标准使用的要求 (Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste.)
NF F31-041-1990 铁路车辆.车内旋转门.互换性特征和功能特性 (Railway rolling stock. Interior swing doors. Interchangeability characteristics and functional characteristics.)
NF E25-132-1986 加垫圈的金属用螺钉.外齿垫圈.A级 (SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)
NF M60-310-1998 核能.燃料循环技术.废物.高放固体废物长期α辐射稳定性的标准试验方法 (Nuclear energy. Fuel cycle technology. Waste. Standard method for testing the long term alpha irradiation stability of solidified high level radioactive waste forms.)
NF S91-313-1997 牙科设备.给排水管接头 (Dental equipment. Connections for supply and waste lines.)
NF A03-356-1999 金属材料 (Metallic materials.)
NF T72-502-1997 化学消毒剂和防腐剂.医疗卫生时手消毒法.试验方法和要求(第2阶段/第2步) (Chemical disinfectants and antiseptics. Hygienic handrub. Test method and requirements (phase2/step 2).)
NF T90-301-1996 水质.抑制Daphnia magna Straus(枝角目,甲壳纲)活动性的测定.剧毒试验 (Water quality. Determination of the inhibition of the mobility of {Daphnia} magna straus (cladocera, crustacea). Acute toxicity test.)
NF Z85-374-1-1999 智能化网络(IN).智能化网络容量组1(CS1).核心智能网络应用协议(INAP).第1部分:协议规范 (Intelligent Network (IN). Intelligent Network Capability Set 1 (CS1). Core Intelligent Network Application Protocol (INAP). Part 1 : protocol specification.)
NF T20-387-1977 工业氢氧化钾.硫化物含量的测定.还原法和滴定法 (POTASSIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF SULPHUR COMPOUNDS. METHOD BY REDUCTION AND TITRIMETRY.)
NF G52-034-2003 皮革.物理和机械试验.伸长度测定 (Leather - Physical and mechanical tests - Determination of extension set.)
NF E03-005-2-2003 非螺纹密封的管螺纹 第2部分:用极限量规检验 (Pipe threads where pressure-tight joints are not made on the threads - Part 2 : verification by means of limit gauges.)
NF T90-311-1998 水质.用有中脉的骨条藻属和有三突的褐指藻属进行的海藻生长阻滞试验 (Water quality. Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum.)
NF T60-112-1997 石油产品和润滑剂.酸值和碱值的测定.彩色指示剂滴定法 (Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method.)
NF X50-001-5-1-1998 动力站设备的征购指南.第5-1部分:涡轮机.蒸气涡轮机 (Guide for procurement of power station equipment. Part 5-1 : turbines. Steam turbines.)
NF E04-500-2000 技术产品文献.限制文献和产品使用的保护通告 (Technical product documentation - Protection notices for restricting the use of documents and products.)
NF X43-017-1984 空气质量.周围空气悬浮物质浓度的测定.B射线吸收法 (Air quality. Measurement of the concentration of solid particles in ambient air. Beta ray absorption method.)
NF V03-924-2-2000 含油种子残留物.油含量测定.第2部分:快速萃取法 (Oilseed residues - Determination of oil content - Part 2 : rapid extraction method.)
NF E05-056-2000 几何产品规范(GPS).表面结构:轮廓法.接触仪器的校准 (Geometrical Product Specifications (GPS) - Surface texture : profil method - Calibration of contact (stylus) instruments.)
NF V37-022-1997 卷烟烟雾常规分析器.补充试验方法 (Routine analytical cigarette-smoking machine. Additional test methods.)
NF G36-030-1-2000 织物吊环.安全性.第1部分:水平编织吊带.一般用途的人工纤维吊带 (Textiles slings - Safety - Part 1 : flat woven webbing slings, made of man-made fibres, for general purpose use.)
NF E49-330-2-2000 气流动力.压缩空气调节器和过滤器调节器.第2部分:包括在供应商文件内的主要特性测定的试验方法 (Pneumatic fluid power - Compressed air regulators and filter-regulators - Part 2 : test methods to determine the main characteristics to be included in literature from suppliers.)
NF G07-042-6-2000 织物.色牢度试验.第Z06部分:颜料和颜色迁移的评价 (Textiles - Tests for colour fastness - Part Z06 : evaluation of dye and pigment migration.)
NF C97-001-3-2000 数字音频接口.第3部分:消费者应用 (Digital audio interface - Part 3 : consumer applications.)
NF S90-670-1987 残疾人用技术系统和辅助器具.吸尿辅助器具.一次性使用的产品.术语和定义 (Technical systems and aids for disabled or handicapped persons. Urinary absorbing aids. Single use products. Terms and definitions.)
NF Z83-581-1-1998 蜂窝式数字通信系统(阶段2).半速语音服务.第1部分:半速语音处理功能(GSM 06.02) (Digital cellular telecommunications system (phase 2). Half rate speech. Part 1 : half rate speech processing functions (GSM 06.02).)
NF Z84-175-6-1998 无线电设备和系统(RES).数字增强无线通信(DECT).公共接口(CI).第6部分:识别和寻址 (Radio Equipment and Systems (RES). Digital Enhanced Cordless Telecommunications (DECT). Common Interface (CI). Part 6 : identities and addressing.)
NF C23-556/A1-1998 NF EN 50056-1992的修改件1 ()
NF T50-007-2/A1-2000 塑料.聚丁烯(PB)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 (Plastics - Polybutene (PB) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1.)
NF C83-132-1981 电子元器件质量评定协调体系.分规范.2级陶瓷电介质固定电容器 (Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors with ceramic dielectric, class 2.)
NF E86-511-2001 低温车辆.低温柔性软管 (Cryogenic vessels - Cryogenic flexible hoses.)
NF Z83-523-1996 欧洲蜂窝式数字通信系统(阶段2).编号、寻址和识别(GSM 03.03) (European digital cellular telecommunications system (phase 2). Numbering, addressing and identification (GSM 03.03).)
NF T54-059-1995 压力管道和配件用热塑性塑料.分类和名称与符号.总体设备的设计系数 (Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.)
NF L15-535-2001 航空航天系列.铝合金挤压槽型断面.尺寸 (Aerospace series - Extruded channel section in aluminium alloys - Dimensions.)
NF T47-286-1998 橡胶或塑料软管和软管组件.无柔性液压脉冲试验.欧洲标准EN ISO 6803) (Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing.)
NF E29-591-3-1998 铜和铜合金.管道配件.第3部分:用于塑料管的压缩终端配件 (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).)
NF T90-355-2-2000 水质.江河的生物分类.第2部分:对海底微型无脊椎动物调查的生物质量数据的表示指南 (Water quality - Biological classification of rivers - Part 2 : guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates.)
NF X42-081-1997 生物技术.大规模加工和生产.人员培训,控制导则 (Biotechnology. Large-scale process and production. Guidance for good practice, procedures, training and control for personnel.)
NF P16-150-6-1998 建筑物外部排水和污水系统.第6部分:泵设备 (Drain and sewer systems outside buildings. Part 6 : pumping installations.)
NF E51-291-1996 压缩机和真空泵.安全要求.第2部分:真空泵 (Compressors and vacuum pumps. Safety requirements. Part 2 : vacuum pumps.)
NF U10-152-1998 农用拖拉机和机械.发动机试验规程.有效功率 (Agricultural tractors and machines. Engine test code. Net power.)
NF Z84-683-1999 无线电设备和系统(RES).在9KHZ和25GHZ之间操作的短程装置用电磁兼容性(EMC)标准 (Radio Equipment and Systems (RES). ElectroMagnetic Compatibility (EMC) standard for Short Range Devices (SRD) operating on frequencies between 9 kHz and 25 GHz.)
NF X08-003-1994 图文符号.安全颜色和安全信号 (Graphical symbols. Safety colours and safety signs.)
NF U14-201-1997 农业拖拉机和农业机械.机械和农具的动力输出传动轴 (Agricultural tractors and machinery. Power take-off shafts and position of power-input connection.)
NF E21-000-2002 钻套.定义和术语 (Jig bushes - Definitions and nomenclature.)
NF Z82-046-2-1998 集成服务数字网络(ISDN).初始比率通道.安全和防护.第2部分:界面 IA.安全 (Integrated Services Digital Network (ISDN). Primary rate access. Safety and protection. Part 2 : interface Ia. Safety.)
NF T51-167-1999 塑料.增塑剂损耗的测定.活性炭法 (Plastics. Determination of loss of plasticizers. Activated carbon method.)
NF X42-141-1999 生物工程.细胞破碎的性能标准(EN 12885) (Biotechnology. Performance criteria for cell disrupters.)
NF Z85-638-1998 传输和多路转换(TM). 数字无线电继电系统.在频率谱带范围为10GHz和14GHz内的有20MHz可转换通路空间内操作的 ()
NF Z47-402-1999 信息和文献.信息回溯 (Information and documentation - Information retrieval (Z39.50) - Application service definition and protocol specification.)
NF T47-820-11-1998 结构轴承.第11部分:运输,存储和安装 (Structural bearings. Part 11 : transport, storage and installation.)
NF C31-004-2000 特种绕组线规范.第0部分:一般要求.第4节:玻璃纤维绕组树脂或清漆浸渍的裸铜线或漆包扁铜线 (Specifications for particular types of winding wires - Part 0 : general requirements - Section 4 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.)
NF Z83-570-1998 数字蜂窝通信系统(相2).建议和主管(AOC)补充服务.第3步(GMS 04.86) (Digital cellular telecommunications system (Phase 2). Advice of Charge (AoC) supplementary services. Stage 3. (GSM 04.86).)
NF C97-151-2-2000 使用VHS型12.65mm(0.5in)磁带的螺旋扫描盒式磁带录像系统.第2部分:FM音频记录 (Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 2 : FM audio recording.)
NF H34-040-2-2000 包装.小负荷搬运系统.第2部分:柱形可堆放系统 (Packaging - Small load carrier systems - Part 2 : column stackable system (CSS).)
NF L21-416-2001 航空航天系列.耐腐蚀钢FE-PA2601制钝化英制100度沉头标称凸头的实心铆钉 (Aerospace series - Rivets, solid, 100 o countersunk normal head with dome, in corrosion resisting steel FE-PA2601, passivated, inch based series.)
NF X33-004-2000 淤泥的特性.干物质点火损失的测定 (Characterization of sludges - Determination of the loss on ignition of dry mass.)
NF P50-601-1/A1-1998 DTU 65.12.建筑工程.用于家用热水产生和供暖的使用热传输液体的平面太阳能收集器.第1部分:技术规范 (DTU 65.12 - Building works - Plain solar collector installations using heat transfer liquid, used for heating and the production of domestic hot water - Part 1 : technical specifications.)
NF S72-410-2000 防护服.骑马者身体和肩的保护物和防护夹克.要求和试验方法 (Protective clothing - Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods.)
NF C79-632-1-2000 电热设备的安全.第21部分:电阻加热设备的特殊要求.加热和熔化玻璃设备 (Safety in electroheat installations - Part 21 : particular requirements for resistance heating equipment - Heating and melting glass equipment.)
NF P92-120-4-2000 受力构件的防火试验.第4部分:柱 (Fire resistance tests for loadbearing elements - Part 4 : columns.)
NF H44-020-1988 烟雾发生器.压力分配容器(气雾剂容器型).气雾剂容器上阀门的机械密封和安装的快速试验 (AEROSOL DISPENSERS. RAPID TEST. TIGHTNESS OF VALVE MECHANISMS AND CLINCH.)
NF Z83-506-1996 欧洲蜂窝式数字通信系统(阶段2).安全状况(GSM02.09) (European digital cellular telecommunications system (phase 2). Security aspects (GSM 02.09).)
NF T47-305-4-2000 弹性密封件.水和排水设施用管接头密封件材料的要求.第4部分:铸造聚氨基甲酸乙酯密封元件 (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements.)
NF T51-038-1999 塑料.热塑塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测定 (Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.)
NF G52-039-2003 皮革.物理和机械试验.用挠曲计法测定抗弯性 (Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method.)
NF T72-152-1997 化学消毒剂和防腐剂.基本杀菌活性.试验方法和要求(阶段1) (Chemical disinfectants and antiseptics. Basic bactericidal activity. Test method and requirements (phase 1).)
NF Z84-162-1999 电磁兼容性和无线电频谱(ERM).在甚高频带进行的海上移动业务用无线电话传送机和接收机.技术特性和测量方法 (Electromagnetic compatibility and Radio spectrum Matters (ERM). Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands. Technical characteristics and methods of measurement.)
NF V03-621-1994 葡萄糖.干燥后质量损失的测定.真空烘箱法 (Dextrose. Determination of loss in mass on drying. Vacuum oven method.)
NF E29-591-4-1998 铜和铜合金.管道配件.第4部分:用毛细或压缩终端连接于其它终端的配件 (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 4 : FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS. (EUROPEAN STANDARD EN 1254-4).)
NF X06-002-2-1993 统计学.词汇和符号.第2部分:统计质量控制 (Statistics. Vocabulary and symbols. Part 2 : statistical quality control.)
NF V03-743-1998 谷类.油籽和豆类.堆积谷物一维空气流通中单位压力损失的测定 (Cereals, oilseeds and pulses. Measurement of unit pressure loss in one-dimensional air flow through bulk grain.)
NF G07-012-8-2000 纺织品.色牢度试验.第B08部分:蓝色羊毛参比材料1~7的质量控制 (Textiles - Tests for colour fastness - Part B08 : quality control of blue wool reference materials 1 to 7.)
NF T51-211-1994 塑料.乳浊态或分散态聚合物/树脂.用确定的切变速率梯度旋转粘度计测量粘度 (Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate.)
NF C93-550/A1-1984 NF C 93-550-1982的补充件1 ()
NF P18-650-8-2000 集料的机械和物理性能试验.第8部分:测定抛光石尺寸 (Tests for mechanical and physical properties of aggregates - Part 8 : determination of the polished stone value.)
NF M50-005-4-2000 燃气供应系统.最大操作压力高达(和包括)16巴的管线.第4部分:修理的特殊功能推荐 (Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 4 : specific functional recommendations for renovation.)
NF S91-180-2000 牙科镊子.第3部分:College型 (Dental tweezers - Part 3 : College types.)
NF S95-118/A1-2001 人工肺呼吸装置.第1部分:监护用人工呼吸装置的特殊要求 (Lung ventilators - Part 1 : particular requirements for critical care ventilators.)
NF C93-369-3-2001 软磁性材料制成的磁芯.测量方法.第3部分:高冲击水平的磁化特性 (Cores made of soft magnetic materials - Measuring methods - Part 3 : magnetic properties at high excitation level.)
NF P61-605-1998 瓷砖粘结剂.滑度的测定 (Adhesives for tiles. Determination of slip.)
NF A51-303-1998 铜和铜合金.可锻和未锻的锻料 (Copper and copper alloys - Wrought and unwrought forging stock.)
NF X42-131-1999 生物技术.轴密封件的性能标准 (Biotechnology. Performance criteria for shaft seals.)
NF S94-750-7-2002 眼科植入物.眼内透镜.第7部分:临床检测 (Ophthalmic implants - Intraocular lenses - Part 7 : clinical investigations.)
NF Z48-005-1998 信息和文献工作.程序库性能指示器 (Information and documentation. Library performance indicators.)
NF S90-605-1982 残疾人用车和轮椅.试验设备 (Vehicles and wheelchairs for the handicapped. Test device.)
NF U14-502-1997 农用轮式拖拉机和机具.三点联结连接器.第2部分:A型框架连接器 (Agricultural wheeled tractors and implements. Three-point hitch couplers. Part 2 : A-frame coupler.)
NF L22-574-2000 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa ()
NF D90-218-1999 羽毛和绒毛.作为鞋底填充料的经加工的羽毛和绒毛的成分标记 (Feather and down - Composition labelling of proccessed feathers and down for use as sole filling material.)
NF T51-008-1998 塑料.酚-甲醛模塑.游离氨的检验 (Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia.)
NF C03-162-2-2000 工业系统、装置、设备和工业产品.结构原则和参考命名.第2部分:物品分类和分级编码 (Industrial systems, installations and equipement, and industrial products - Structuring principles and reference designations - Part 2 : classification of objects and codes for classes.)
NF C46-600/A2-2000 通用区域通信系统.修改件A2 (General purpose field communicaation system.)
NF T58-202-4-2000 焊接固定常压热塑性槽罐.第4部分:法兰连接的设计和计算 (Welded static non-pressurised thermoplastic tanks - Part 4 : design and calculation of flanged joints.)
NF E29-303-3-2000 阀门.阀体、阀盖和阀套用材料.第3部分:欧洲标准中规定的铸铁 (Valves - Materials for bodies, bonnets and covers - Part 3 : cast iron specified in European Standards.)
NF T47-820-1-2000 结构轴承.第1部分:一般设计规则 (Structural bearings - Part 1 : general design rules.)
NF A82-100-1987 电阻焊接.电阻焊接用电极材料及辅助设备 (Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.)
NF C97-175-2001 视频记录.使用12.65mm磁带的合并数据压缩的(数字格式-L)螺旋式扫描数字元件视频盒式记录格式 (Video recording - Helical-scan digital component video cassette recording format using 12,65 mm magnetic tape incorporating data compression (Format digital-L).)
NF V03-060-1-1998 食品.亚硫酸盐的测定.第1部分:优化莫涅.威廉母斯方法 (Foodstuffs. Determination of sulfite. Part 1 : optimized Monier-Williams method.)
NF A50-110-4-2003 铝和铝合金.废料.第4部分:由一种可锻合金组成的废料 (Aluminium and aluminium alloys - Scrap - Part 4 : scrap consisting of one single wrought alloy.)
NF X41-048-1996 自胶粘带.一卷胶粘带长度的测量 (Self adhesive tapes. Measurement of the length of a roll of adhesive tape.)
NF G38-189-2001 土工织物及相关产品.用于保持液态废物项目的特征要求 (Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects.)
NF M06-001-2000 石油工业.术语.第99部分:总则和索引 (Petroleum industry - Terminology - Part 99 : general and index.)
NF P12-610-2000 圬工辅助成份的试验方法.第10部分:支架负载偏转特性和负载容量的测定 (Methods of test for ancillary components for masonry - Part 10 : determination of load capacity and load deflection characteristics of brackets.)
NF X35-300-1-2000 与脑力工作负荷有关的人类工效学原理.第1部分:一般条款和定义 (Ergonomic principles related to mental work-load - Part 1 : general terms and definitions.)
NF V03-121-1-1998 食品.谷类作物和谷类作物产品中赭曲霉素A的测定.第1部分:硅胶净化高效液体色谱法 (Foodstuffs. Determination of ochratoxin A in cereals and cereal products. Part 1 : high performance liquid chromatographic method with silica-gel clean up.)
NF A51-306-1998 铜和铜合金.切削加工用空心棒 (Copper and copper alloys - Hollow rod for free machining purposes.)
NF Z86-423-1995 卫星地面站和系统(SES).提供电话和/或数据通讯的在1.5/1.6 GHZ频带下操作的陆上移动地面站 (Satellite earth stations and systems (ses). Land mobile earth stations (lmess) operating in the 1,5/1,6 GHz bands providing voice and/or data communications.)
NF J95-045-1998 小型船舶.船底阀和整个船体用配件.第1部分:金属的 (Small craft. Seacoks and through-hull fittings. Part 1 : metallic.)
NF A40-501-3-1991 关于热轧钢板、宽扁材和型钢表面状况的技术交货条件.第3部分:型钢 (Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. Part 3 : sections.)
NF T47-820-9-1998 结构轴承.第9部分:防护 (Structural bearings. Part 9 : protection.)
NF A51-302-1998 铜和铜合金.切削加工用棒 (Copper and copper alloys - Rod for free machining purposes.)
NF Z86-332-1998 卫星地面站和系统(SES).用于通信操作的在固定的卫星服务器(FSS)6GH和4GH频率带内只发射或发射和接收非常小 ()
NF Z82-262-1995 集成服务数字网络(ISDN).以句法为基础的广播电视通讯服务.服务说明 (Integrated Services Digital Network (ISDN). Syntax-based videotex teleservice. Service description.)
NF T54-903-1996 塑料管道系统.建筑物内排水管用热塑制管道系统.可载温度负荷的检验方法 (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.)
NF C93-400-2-2-2003 电子设备连接器.试验和测量.第2-2部分:电连续性和接触电阻试验.试验2b:接触电阻.规定试验电流法 (Connectors for electronic equipment - Tests and measurements - Part 2-2 : electrical continuity and contact resistance tests - Test 2b : contact resistance - Specified test current method.)
NF V03-716-2002 普通小麦粉.法式面包制作试验 (Common wheat flows (Tricticum aestivum L.) - French bread making test.)
NF T56-134-1998 多孔柔软聚合材料.弹性的测定 (FLEXIBLE CELLULAR POLYMERIC MATERIALS. DETERMINATION OF RESILIENCE. (EUROPEAN STANDARD EN ISO 8307).)
NF S51-212/A6-2002 玩具安全性.第1部分:机械和物理特性 (Safety of toys - Part 1 : mechanical and physical properties.)
NF S12-150-1998 眼科仪器.试验框架 (OPHTHALMIC INSTRUMENTS. TRIAL FRAMES. (EUROPEAN STANDARD EN ISO 12867).)
NF C93-027-2003 无焊连接.第7部分:弹簧夹件连接.一般要求、试验方法和实用指南 (Solderless connections - Part 7 : spring clamp connections - General requirements, test methods and practical guidance.)
NF Z83-524-1996 蜂窝式数字通信系统(阶段2).有关呼叫移动用户路由选择的信令要求(GSM 03.04) (Digital cellular telecommunications system (phase 2). Signalling requirements relating to routeing of calls to mobile subscribers (GSM 03.04).)
NF L52-250-511-2003 航空航天系列.飞行器用电缆.试验方法.第511部分:电缆间的磨损 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511 : cable-to-cable abrasion.)
NF T94-404-1998 饮用水处理用化学试剂.聚胺 (CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POLYAMINES. (EUROPEAN STANDARD EN 1409).)
NF P98-119-1991 路面层.粗砂.细煤渣.石灰.定义.混合物.分类 (ROAD FOUNDATIONS. LIME AND FLY ASH BOUND GRANULAR MATERIAL. DEFINITION. COMPOSITION. CLASSIFICATION.)
NF G92-001-1993 书包.定义.要求 (SCHOOL SATCHELS AND BAGS. DEFINITIONS. REQUIREMENTS.)
NF T47-221-1996 气焊设备.焊接和相关工艺用热塑管 (Gas welding equipment. Thermoplastic hoses for welding and allied processes.)
NF C93-7161-1985 C93-716-83的补充1 ()
NF C64-201-1977 交流电用高压设备.高性能熔丝熔断器.特性 (A.C. HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. HIGH BREAKING CAPACITY FUSES. CHARACTERISTICS.)
NF P26-402-1942 五金.角钢 (HARDWARE. SQUARES.)
NF C18-479-2001 带电作业.绝缘材料用柔性导线外壳(软管) (Live working - Flexible conductor covers (line hoses) of insulating material.)
NF E73-521-2-2001 木工工具.安全要求.第2部分:支架固定铣刀的支架要求 (Tools for woodworking - Safety requirements - Part 2 : requirements for the shank of shank mounted milling tools.)
NF T60-261-1-2001 动植物脂肪和油.植物油中stigmastidenes的测定.第1部分:毛细管柱气相色谱法(参考方法) (Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1 : method using capillary-column gas chromatography (Reference method).)
NF E09-001-2-1991 机械安全.基本概念、设计的一般原理.第2部分:技术原理和规范 (Safety of machinery. Basic concepts, general principles for design. Part 2 : technical principles and specifications.)
NF T51-659-2-1998 塑料.烟雾产生.第2部分:用单燃烧室试验测定光密度 (Plastics. Smoke generation. Part 2 : determination of optical density by a single-chamber test.)
NF V08-015-1991 微生物学.大肠杆菌计数通用指南.菌落计数技术 (Microbiology. General guidance for the enumeration of coliforms. Colony count technique.)
NF X42-109-1998 生物工程.大规模处理和生产.废物处理,失活和试验指南 (Biotechnology. Large scale process and production. Guidance for the handling, inactivating and testing of waste.)
NF T60-104-1998 石油产品.颜色的测定(ASTM刻度) (Petroleum products. Determination of colour (ASTM scale).)
NF T75-408-1986 香精油.蒿属侧柏酮和药用鼠尾草香精油.α和β含量的测定.毛细塔和填充塔气相色谱法 (Oils of {Artemisia} and officinale sage ({Salvia} {Officinalis} {Linnaeus}). Determination of alpha et beta thujone content. Gas chromatographic method on packed and capillary column.)
NF X50-001-7-1-2000 动力站设备和系统的征购指南.第7部分:管道和阀门.第1节:高压管道系统 (Guide for procurement of power station plant, equipement and systems - Part 7 : pipework and valves - Section 1 : high pressure piping systems.)
NF P81-201/A1-1999 DTU 63.1.NF P 81-201-1993的补充件1 ()
NF P25-306-2000 工业,商业和车库门.热传输性.计算要求 (Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation.)
NF E44-420-2000 液体泵和泵部件.噪音试验规程.2级或3级精度 (Liquid pumps and pump units - Noise test code - Grade 2 and grade 3 of accuracy.)
NF P12-606-2000 圬工辅助成份的试验方法.第5部分:拉伸和压缩负载容量和墙系柱和负载代替特性的测定(双端法) (Methods of test for ancillary components for masonry - Part 6 : determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test).)
NF U42-001/A1-1991 补充件1 ()
NF V32-155-1982 香料和佐料.整姜黄或姜黄粉.规范 (Spices and condiments. Turmeric, whole or ground (powdered). Specification.)
NF A49-875-5-2000 钢管的无损检验.第5部分:检测纵向缺陷用无缝和焊接(除埋弧焊)锰钢管的自动全周边电磁变换器/磁漏试验 (Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for)
NF T60-246-2000 动植物脂肪和油.茴香胺值测定 (Animal and vegetal fats and oils - Determination of anisidine value.)
NF C90-001/A1-1988 NF C 90-001-1987补充件1 ()
NF V33-002-1991 固体速溶茶.规范 (Instant tea in solid form. Specification.)
NF P12-608-2000 圬工辅助成份的试验方法.第8部分:墙筋吊架处负载偏转特性和负载容量的测定 (Methods of test for ancillary components for masonry - Part 8 : determination of load capacity and load-deflection characteristics of joist hangers.)
NF C51-318-31/A1-2000 旋转电机.第18部分:绝缘体系的功能评定.第31节:模绕绕组线的试验程序.机器最大功率为50MVA,电压为15kV的绝 (Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 31 : test procedures for form-wound windings - Thermal evaluation and classification of insulation system)
NF P62-403-2000 有弹性的地板覆盖物.软木地板.规范 (Resilient floor coverings - Cork floor tiles - Specification.)
NF P20-508-2000 门和窗.对风阻力的承受能力.分类 (Windows and doors - Resistance to wind load - Classification.)
NF A45-313-1984 冶金产品.热轧材.每米46kg重宽底钢轨和鱼尾板 (Iron and steel products. Hod-rolled. 46 kg/m flat bottom ralway rail and fishplate.)
NF C73-856-2001 家用和类似用途电器的安全.第2-56部分:放映机及类似器具的特殊要求 (Safety household and similar electrical appliances - Part 2-56 : particular requirements for projectors and similar appliances.)
NF X50-001-3-2-2000 动力站设备的征购指南.第3部分:锅炉.第2节:有壳锅炉 (Guide for procurement of power station equipement - Part 3 : boilers - Section 2 : shell boilers.)
NF M08-015-2000 石油和液化石油产品.温度测量.手工方法 (Petroleum and liquid petroleum products - Temperature measurements - Manual methods.)
NF C83-231/A1-1988 NF C 83-231-1981的补充件1 ()
NF C26-207-2000 电气绝缘系统的评估和质量检定 (Evaluation and qualification of electrical insulation systems.)
NF E52-605-1-2000 货物用施工升降机.第1部分:带附属平台的升降机 (Builders hoists for goods - Part 1 : hoists with accessible platforms.)
NF V04-220-1992 牛奶.总磷含量的测定.分子吸收光谱测定法 (Milk. Determination of total phophorus content. Method using molecular absorption spectrometry.)
NF D11-110-2001 有垫环的轴架.连接尺寸 (Pedestal bidets with over-rim supply - Connecting dimensions.)
NF T30-053-1-1994 色漆和清漆.耐液体性测定.第1部分:总方法 (Paints and varnishes. Determination of resistance to liquids. Part 1 : general methods.)
NF A22-409-1986 锰矿石.铅的测定.重力计法 (Manganese ores. Determination of lead content. Gravimetric determination.)
NF B38-207-1996 纺织玻璃纤维.机织织物.厚度的测定 (TEXTILE GLASS. WOVEN FABRICS. DETERMINATION OF THICKNESS.)
NF E66-247-1968 后定中心螺纹孔变换齿圈套筒式三面刃铣刀 (SIDE AND FACE CUTTERS WITH ALTERNATE TEETH,WITH THREADED BORE AND BACK CENTRING.)
NF T20-296-1970 硫酸和发烟硫酸的化学分析.硝态氮的测定 (CHEMICAL ANALYSIS OF SULPHURIC ACID AND OLEUMS. DETERMINATION OF NITROUS NITROGEN AND NITRIC NITROGEN.)
NF F37-031-1974 铁路车辆.罐车. 蒸汽加热. 蒸汽进口 (RAILWAY TRANSPORT EQUIPMENT. TANK WAGONS. STEAM HEATING SYSTEMS. STEAM INLET.)
NF F55-104-1975 铁路固定设备.地下照明电缆用钢筋混凝土小槽.90°弯槽盖 (FIXED RAILWAY INSTALLATIONS. COMPACT DUCTING IN REINFORCED CONCRETE FOR ELECTRIC LIGHTING CABLES. COVERS FOR 90 DEGREES ELBOWS.)
NF L52-250-201-2002 航空航天系列.飞行器用电缆.试验方法.第201部分:外观检查 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201 : visual examination.)
NF F74-001-1-1992 铁路固定设备和车辆.电子和微处理器信号和辅助驾驶设备.第1部分:一般的环境,设计和使用要求 (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTRONIC AND MICROPROCESSOR SIGNALLING AND DRIVER-AID EQUIPMENT. PART 1 : GENERAL ENVIRONMENTAL, DESIGN AND USER CONDITIONS.)
NF S90-325-1989 外科医疗器械.蒸汽消毒器具 (MEDICAL SURGICAL EQUIPMENT. STEAM DISINFECTING EQUIPMENT.)
NF V18-301-1983 饲料.霉菌的计数 (ANIMAL FEEDING STUFFS. ENUMERATION OF MOULDS.)
NF E66-550-7-1998 带圆柱柄的工具夹.第6部分:带锥形底座的F型工具夹 (TOOL HOLDERS WITH CYLINDRICAL SHANK. PART 7 : TYPE F WITH TAPER SEAT.)
NF C92-501-1998 DVB接收机的特性 (Characteristics of DVB receivers.)
NF Q03-086-2000 纸浆,纸和纸板.对7个指定的聚氯联苯(PCB)的测定 (Pulp, paper and board - Determination of 7 specified polychlorinated biphenyls (PCB).)
NF X06-041-5-1998 应用统计学.测量方法和测量结果的精确性.第5部分:标准测量方法精度测定的迭代法 (Application statistics. Accuracy (trueness and precision) of measurement methods and results. Part 5 : alternative methods for the determination of the precision of a standard measurement methods.)
NF L24-511-2001 航空航天系列.镀银、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃ (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, silver plated - Classification : 900 MPa (at ambient temperature) / 650 o C.)
NF C20-747-2000 环境试验.第2-47部分:试验方法.元件、设备以及其他振动、冲击和及类似动力试验用的物品的安装 (Environmental testing - Part 2-47 : test methods - Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests.)
NF T30-405-1998 涂料和清漆用粘合剂.氨基树脂.试验的一般方法 (Binders for paints and varnishes. Amino resins. General methods of test.)
NF U34-136-2000 林业机械.动力杆式修枝锯的安全要求和试验.第2部分:带有背装电源装置的切削工具 (Machinery for forestry - Safety requirements and testing for pole mounted powered pruners - Part 2 : units for use with a back pack power unit.)
NF D21-301-1-2000 烹饪用具.炉或炉架上使用的家用烹饪用具.第1部分:一般要求 (Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1 : general requirements.)
NF V37-020-1983 烟草和烟草制品.二硫代氨基甲酸盐杀虫剂残留量的测定.分子吸收光谱测定法 (Tobacco and tobacco products. Determination of dithiocarbamate pesticides residues. Molecular absorption spectrometric method.)
NF C71-111/A5-1986 NF C 71-111-1980的补充件5 ()
NF V03-343-1994 茶叶.水萃取物的测定 (Tea. Determination of water extract.)
NF T60-256-1998 动植物脂肪和油.使用宾.马闭杯闪点试验仪作闪点极限测试 (Animal and vegetable fats and oils. Flashpoint limit test using Pensky-Martens closed cup flash tester.)
NF S91-246-2000 牙科修复.磷酸化合耐高温代型材料 (Dental restorations - Phosphate-bonded refractory die materials.)
NF T35-502-4-1999 涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第4部分:涂料涂覆前凝结可能性的评定导则 (Preparation of steel substrates before application of paint and related products. Tests for the assessment of surface cleanliness. Part 4 : guidance on the estimation of the probability of condensation prior to paint application.)
NF T50-006-2/A1-2000 塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1.)
NF M50-005-3-2000 燃气供应系统.最大操作压力高达(和包括)16巴的管线.第3部分:钢的特殊功能推荐 (Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3 : specific functional recommendations for steel.)
NF C31-093-2-2001 绕组线的封装.第3-2部分:锥形输出线轴.由热塑性材料制的可回收使用的绕线轴规范 (Packaging of winding wires - Part 3-2 : taper barrelled delivery spools - Specification for returnable spools from thermoplastic materials.)
NF A09-010-2000 无损检验.无损检验人员的资格鉴定.一般原则 (Non-destructive testing - Qualification and certification of NDT personnel - General principles.)
NF A91-477-2000 金属的防腐蚀.经清洗和没有清洗的铝及铝合金上的铬酸盐转化涂层 (Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys.)
NF X50-001-3-3-2000 动力站设备的征购指南.第3部分:锅炉.第3节:有液化床点火的锅炉 (Guide for procurement of power station equipment - Part 3 : boilers - section 3 : boilers with fluidized bed firing.)
NF P78-343-2000 建筑玻璃.玻璃弯曲强度的测定.第3部分:两点支撑试样的试验(四点弯曲) (Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).)
NF V05-224-1987 速溶咖啡.松散和压实体密度的测定 (Instant coffee. Determination of the free-flow and compacted bulk densities.)
XP A35-045-1-2000 钢制品.预应力钢.第1部分:一般要求 (Steel products - Prestressing steels - Part 1 : general requirements.)
NF C63-316-2000 工业电缆卷筒 (Industrial cable reels.)
NF T45-103-1992 橡胶工业用原料.炭黑.分类系统 (Raw materials for the rubber industry. Carbon blacks. Classification system.)
NF C45-330-2002 带强制引导触点(机械链接)的继电器 (Relays with forcibly guided (mechanically linked) contacts.)
NF X50-122-7-1996 质量管理.设备配制管理指南 (QUALITY MANAGEMENT. GUIDELINES FOR CONFIGURATION MANAGEMENT. (EUROPEAN STANDARD EN ISO 10007).)
NF L54-002-086-2002 航空航天系列.电气及光学连接元件.试验方法.第604部分:光学元件.光学表面的净化能力 (Aerospace series - Elements of electrical and optical connection - Test methods - Part 604 : optical elements - Cleaning capability of optical face.)
NF A55-112-1998 锌和锌合金.取样方法.规范 (ZINC AND ZINC ALLOYS. METHOD OF SAMPLING. SPECIFICATIONS. (EUROPEAN STANDARD EN 12060).)
NF Z83-567-1998 数字蜂窝通信系统(相2).呼叫等候和呼叫保持补充服务.第3步(GMS 04.83) (Digital cellular telecommunications system (Phase 2). Call Waiting (CW) and Call Hold (HOLD) supplementary services. Stage 3. (GSM 04.83).)
NF Z83-603-1999 数字蜂窝电信系统(阶段2).支持包交换数据传输业务的公共区域移动网(PLMN)和包交换公共数据网/综合业务数字 ()
NF X35-122-17-1998 用屏幕显示终端(VDTS)的办公室内人类工效学要求.第17部分:填写问答表格 (Ergonomic requirements for office work with visual display terminals (VDTs). Part 17 : form filling dialogues.)
NF C74-300/A1-1980 NF C 74-300-1973的修改件1 ()
NF Z82-047-2-1998 集成服务数字网络(ISDN).基本通道.安全和防护.第2部分:界面IA.安全 (Integrated Services Digital Network (ISDN). Basic access. Safety and protection. Part 2 : interface Ia. Safety.)
NF M50-016-2000 燃气供应系统.运输和分配气体的气体压力调节站.功能要求 (Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements.)
NF Z86-384-1998 无线电发射系统.高频(VHF).高频 (Radio broadcasting systems. Very High Frequency (VHF), frequency modulated, sound broadcasting transmitters.)
NF E63-022-2001 机床的安全.液压制动 (Safety of machine tools - Hydraulic press brakes.)
NF Q03-087-2000 与食品接触的纸和纸板.着色纸和纸板色牢度的测定 (Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board.)
NF P61-202-2-1994 DTU 52.1.施工.私人市场.地板密封.第2部分:特殊条款 (DTU 52.1 - Execution of work - Private markets - Sealed flooring - Part 2 : special clauses book.)
NF D38-331/A1-1998 NF EN 28187-1992的修改件1 ()
NF A49-875-13-2000 钢管的无损检验.第13部分:无缝和焊接(埋弧焊)钢管的自动全周边超声厚度检测 (Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged ar welded) steel tubes.)
NF C31-682-2000 特种绕组线规范.第32部分:玻璃纤维绕制树脂或清漆浸渍的裸的或漆包扁铜绕组线.温度指数155 (Specifications for particular types of winding wires - Part 32 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155.)
NF V03-342-1981 茶叶.103℃时重量损失的测定 (Tea. Determination of loss in mass at 103 degrees C.)
NF C93-612-2000 进行过质量评定的压电滤波器.第1部分:总规范 (Piezoelectric filters of assessed quality - Part 1 : generic specification.)
NF H60-140-2000 包装.通过组成和生物降解对包装再覆盖性的要求.包装最终验收的试验计划和评价标准 (Packaging - Requirements for packaging recoverable through compositing and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging.)
NF P62-203-2-1993 DTU 53.2.建筑工程.私人合同.塑料地面覆盖物.第2部分:特殊条款 (DTU 53.2 - Building works - Private contracts - Plastic floor coverings - Part 2 : special clauses.)
NF F31-052-1994 铁路车辆.旅客通道的门.概论.术语 (Railway rolling stock. Carriage doors. Generalities. Terminology.)
NF F31-053-1991 铁路车辆.车速在160-200KM/H范围内的客车车门.特征.操作.检查与试验 (Railway rolling stock. Carriage access doors with running speed included in 160 to 220 km/H range. Characteristics. Operating. Checks and tests.)
NF L78-511-1970 摄影用胶片卷筒 (FILM SPOOL FOR AERIAL PHOTOGRAPHY.)
NF J95-026/A1-2000 小艇.船壳识别.编码系统 (Small craft - Hull identification - Coding system.)
NF E29-902-1-1997 法兰及其接头.PN指定法兰用垫圈的尺寸.第1部分:有或无衬套的非金属平垫圈 (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 1 : non-metallic flat gaskets with or without inserts.)
NF E09-052-1998 机械安全.考虑到接近人体时的速度的防护设备的定位.(欧洲标准EN999) (Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body.)
NF L19-046-1993 航空航天系列.管状单元,六角形,玻璃纤维,聚酰亚胺树脂浸渍的蜂窝状材料,正负45度取向.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.)
NF E49-003-3-1993 气动液力传动.10bar气缸.互换性尺寸.第3部分:双头活塞杆气缸 (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 3 : DOUBLE-ENDED PISTON ROD CYLINDER.)
NF E62-265-1976 机床构造标准部件.多轴头.调整套的螺帽 (MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. NUTS FOR MULTI-SPINDLE HEADS.)
NF E60-400-2002 机床.安全性.固定式磨床 (Machine-tools - Safety - Stationary grinding machines.)
NF P84-604-2001 防水软板.低温时测定弯曲性能.第5部分:屋顶防水用塑料和橡胶薄板 (Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5 : plastic and rubber sheets for roof waterproofing.)
NF T90-103-1-1998 水质.N天后(BODN)对生化氧需求的测定.第1部分:添加有丙烯基硫脲的稀释和催育法 (Water quality. Determination of biochemical oxygen demand after n days (BODn). Part 1 : dilution and seeding method with allylthiourea addition.)
NF X50-001-4-1-1999 发电站设备的采购指南.第4部分:锅炉附件.第1节:减少粉尘排放的设备 (Guide for procurement of power station equipment. Part 4 : boiler auxiliaries. Section 1 : equipment for reduction of dust emission.)
NF A35-552-1-1997 淬火和回火钢.第1部分:特殊钢交货技术条件 (Quenched and tempered steels - Part 1 : technical delivery conditions for specials steels.)
NF C93-910-10-2001 光纤导线接口.第10部分:小型MPO型导线系列 (Fibre optic connector interfaces - Part 10 : type Mini-MPO connector family.)
NF C90-201-4-2-2001 3kHz-148.5kHz频段低压电网的信号传输.第4-2部分:低压去耦过滤器.安全要求 (Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-2 : low-voltage decoupling filters - Safety requirements.)
NF Z82-678-2000 综合业务数字网(ISDN).“视频会议“的电信服务.服务说明 (Integrated Services Digital Network (ISDN) - Videoconference teleservice - Service description.)
NF F21-206-2-2000 铁路应用.滚动运货.导电弓架:特性和试验.第2部分:地下铁道和轻型铁路车辆的导电弓架 (Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 2 : pantographs for metro and light rail vehicles.)
NF A37-603-3-2001 钢丝和丝产品.钢丝上的有机涂层.第3部分:PE涂覆钢丝 (Steel wire and wire products - Organic coatings on steel wire - Part 3 : PE coated wire.)
NF C01-394/A2-2001 电工词汇.394章:核检测仪表装置.仪表 (Electrotechnical vocabulary - Chapter 394 : nuclear instrumentation - Instruments.)
NF T72-204-2000 化学消毒剂和防腐剂.在家畜场中使用的化学消毒剂和防腐剂杀真菌剂活性评定的定量悬浮液试验.试验方法和要求 (Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and req)
NF F31-042-1990 铁路车辆.车内旋转门构件.互换性特征和功能特性 (Railway rolling stock. Component parts of interior swing doors. Interchangeability characteristics and functional characteristics.)
NF C61-305-1981 家用和类似用途的电器附件.木制踢脚板和木框用10/16A、250V插座口 (Electrical accessories for domestic and similar purposes. 10/16 amperes 250 volts socket-outlets for wood baseboards and frames.)
NF A05-669-2000 海水中阴极保护的基本原理 (General principles of cathodic protection in sea water.)
NF T90-323-1998 水质.水介质中有机化合物的清除和生物降解性的评价.活性污泥模拟测试 (Water quality. Evaluation of the elimination and biodegradability of organic compounds in an aqueous medium. Activated sludge simulation test.)
NF T54-937-2000 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验法 (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang)
NF Z83-568-1998 数字蜂窝通信系统(相2).多部分补充服务.第3步(GMS 04.84) (Digital cellular telecommunications system (Phase 2). Multi Party Supplementary services (MPTY). Stage 3. (GSM 04.84).)
NF E25-501-2000 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级 (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.)
NF C32-208/A1-1991 NF C32-208-1985的补充件1 ()
NF C93-522/A1-1982 NF C 93-522-1982的补充件1 ()
NF P20-502-2000 窗户和门.透气性.试验方法 (Windows and doors - Air permeability - Test method.)
NF T90-306-2000 水质.水介质中有机化合物的最大限度的需氧生物降解能力的评定.二氧化碳释放试验 (Water quality - Evaluation of ultimate aerobic biodegradability of arganic compounds in aqueous medium - Caebon dioxide evolution test.)
NF C61-501/A23-2000 灯头、灯座及检验其互换性和安全性的量规.第1部分:灯头 (Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 : lamp caps.)
NF Z82-052-3-2000 综合业务数字网(ISDN).多用户号码(MSN)补充服务.数字用户信号系统1(DSS1)协议.第3部分:试验组结构和试验目 (Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) supplementary service - Digital Subscriber Signalling System No one (DSS1) protocol - Part 3 : Test Suite Structure and Test)
NF Z89-767-2000 人类工效学.电话预付卡.可触模标记 (Human factors (HF) - Telephone Prepayment Cards - Tactile Identifier.)
NF T51-116-1-2000 塑料.硬质塑料击穿性能测定.第1部分:无仪器冲击试验 (Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing.)
NF C83-150/A2-1981 NF C 83-150-1981的补充件2 ()
NF C83-151/A1-1990 NF C 83-151-1988的补充件1 ()
NF Q75-751-1987 印刷工艺.模块字体主要尺寸 (Graphic technology. Main dimensions of modular writting.)
NF S91-237-2000 牙科材料.颜色稳定性的测定 (Dental materials - Determination of colour stability.)
NF Q03-039-1983 纸张和纸板试验.从纸张和纸板蓝色测量漫反射系数 (Paper and board tests. Measurement of diffuse blue reflectance factor of paper and board.)
NF D29-011-4-1998 与食品料有关的材料和物质.餐具和凹型餐具.第4部分:镀金餐具的要求 (MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS. CUTLERY AND TABLE HOLLOWARE. PART 4 : REQUIREMENTS FOR GOLD PLATED CUTLERY. (EUROPEAN STANDARD EN ISO 8442-4).)
NF T30-301-1969 涂料.溶剂挥发指数的测定 (PAINTS. DETERMINATION OF THE VOLATILITY INDEX OF A SOLVENT.)
NF C32-206-1988 设备用绝缘电缆和导线.机床和工业设备用聚氯乙烯套绝缘软电缆 (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. POLYVINYL CHLORIDE INSULATED AND POLYVINYL CHLORIDE SHEATHED FLEXIBLE CABLES FOR INTERNAL WIRING OF MACHINE-TOOLS AND FOR USE IN INDUSTRIAL INSTALLATIONS. SERIES OF THE NATIONAL TYPE OF CATEGORY 2.)
NF E04-524-2-2001 技术制图.画法的一般原则.第21部分:用计算机辅助设计(CAD)系统画直线 (Technical drawings - General principles of presentation - Part 21 : preparation of lines by CAD-systems.)
NF H13-010-1978 包装洗衣粉和去污粉的包装.纸板箱和纸板桶的尺寸和容积 (PACKAGES FOR WASHING AND CLEANING POWDERS. DIMENSIONS AND VOLUMES OF CARTONS AND DRUMS FROM FIBRE BOARD. (EUROPEAN STANDARD EN 23-1).)
NF T73-275-1982 表面活性剂.工业用羟乙基脂肪胺.分析法 (SURFACE ACTIVE AGENTS. TECHNICAL ETHOXYLATED FATTY AMINES. METHODS OF ANALYSIS.)
NF J42-110-1952 造船工业.内部排水.液压排水器 (SHIPBUILDING. INTERNAL SCUPPERS. HYDRAULIC SCUPPERS.)
NF E04-741-2-1998 园珠笔及其笔芯.第2部分:文件应用 (ROLLER BALL PENS AND REFILLS. PART 2 : DOCUMENTARY USE (DOC).)
NF E62-502-1977 铣刀杆轴.7/24锥体 (MILLING CUTTER ARBORS WITH 7/24 TAPER.)
NF Z84-827-1999 电磁兼容性和无线电频谱(ERM).地面中继无线电(TETRA)和辅助设备用电磁兼容性(EMC)标准 (Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) standard for Terrestrial Trunked Radio (TETRA) and ancillary equipment.)
NF T54-015-1997 塑料管道系统.热塑阀门.抗内压和防泄漏的试验方法 (Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.)
NF T54-924-1999 塑料管道系统.未增塑聚(氯乙烯)(PVC-U)配件和材料.依据总氯含量的PVC含量的估计方法(EN 1905) (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.)
NF X50-803-1999 运输质量系统.道路、铁路和内河运输.补充EN ISO 9002的危险物质安全运输质量系统要求 (Transport quality system. Road, rail and inland navigation transport. Quality system requirements to supplement EN ISO 9002 for the transport of dangerous goods with regard to safety.)
NF X50-001-4-6-1999 发电站设备的采购指南.第4部分:锅炉附件.第6节:烟气除硫设备 (Guide for procurement of power station equipment. Part 4 : boiler auxiliaries. Section 6 : flue gas desulphurization De-SOx) plant.)
NF L07-201-1987 航空航天系列.计算机输出缩微胶片.缩微胶片A6 (Aerospace series. Computer output microfiche (com). A6 microfiche.)
NF V03-010-5-1997 食品.硝酸盐和/或亚硝酸盐含量的测定.第5部分:婴儿用含蔬菜食品中硝酸盐含量的酶测定法 (Foodstuffs. Determination of nitrate and/or nitrite content. Part 5 : enzymatic determination of nitrate content of vegetable containing food for babies and infants.)
NF T47-108-1993 传送带.抗燃烧强度.规范和试验方法 (Conveyor belts. Flame retardation. Specifications and test method.)
NF X45-310-2000 过滤盒.试验方法.挤压和喷发强度的验证 (Filter cartridges - Test methods - Verification of the crushing or bursting strength.)
NF E25-453-2001 米制细牙螺纹的六角头薄螺母(倒角的).产品等级A和B (Hexagon thin nuts (chamfered) with metric fine pitch thread - Product grades A and B.)
NF C63-424/A2-2000 低压开关设备和控制设备组件.第4部分:施工现场用组件的特殊要求 (Low-voltage switchgear and controlgear assemblies - Part 4 : particular requirements for assemblies for construction sites (ACS).)
NF X42-121-1998 生物技术.设备.灭菌试验过程指南 (Biotechnology. Equipment. Guidance on testing procedures for sterilizability.)
NF S98-059-2000 要消毒的医疗设备用包装材料和系统.第9部分:加热密封袋、卷轴和盖用未涂覆非织造聚烯烃材料.要求和试验方法 (Packaging materials and systems for medical devices which are to be sterilized - Part 9 : uncoated nonwoven materials of polyolefines for use in the manufacture of heat sealable pouches, reels and lid)
NF P34-309-3-2000 金属片屋顶产品.钢铝或不锈钢片的自支持产品规范.第3部分:不锈钢 (Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3 : stainless steel.)
NF C46-607/A1-1993 NF C 46-607-1991的补充件1 ()
NF B53-644-2000 木材、镶木地板、镶木和镶面.尺寸稳定性的测定 (Wood and parquet flooring and wood panelling and cladding - Determination of dimensional stability.)
NF D21-002-2-2000 与食品接触的材料和用品.家用保温容器.第2部分:保温袋和保温箱规范 (Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2 : specification for insulated bags and boxes.)
NF C59-110-2000 原电池组.第2部分:规范活页 (Primary batteries - Part 2 : specification sheets.)
NF P78-342-2000 建筑玻璃.玻璃弯曲强度的测定.第2部分:试验表面积大的扁平试样的同轴双环试验 (Glass in building - Determination fo bending strength of glass - Part 2 : coaxial double ring test on flat specimens with large test surface areas.)
NF C73-843-2000 家用和类似用途电器的安全.第2部分第43节:干衣机和毛巾架的特殊要求 (Safety of household and similar electrical appliances - Part 2-43 : particular requirements for clothes dryers and towel rails.)
NF R10-105-2-1997 道路车辆.气囊组件.第2部分:气囊组件的试验 (Road vehicles. Airbag components. Part 2 : testing of airbag modules.)
NF J38-108/AM-1974 造船.磁罗盘和附件.B级.型式试验和验证 (SHIPBUILDING. MAGNETIC COMPASSES AND ACCESSORIES. CLASS B. TYPE TESTING AND CERTIFICATION.)
NF T94-350-2001 人类饮用水处理用化学品.单锌磷酸盐溶液 (Chemicals used for treatment of water intended for human consumption - Monozinc phosphate solution.)
NF P93-320-1993 施工现场设备.1类双动可调整金属支脚 (BUILDING SITE EQUIPMENT. DOUBLE ACTING ADJUSTABLE METALLIC STABILIZERS OF CLASS 1.)
NF T20-284-1970 硝酸的化学分析.氯的电位滴定法 (CHEMICAL ANALYSIS OF NITRIC ACID. POTENTIOMETRIC DETERMINATION OF CHLORIDES.)
NF Z64-810-1996 信息技术.在12.7mm盒式磁带上的数据交换--18磁道,每毫米1491数据字节 (INFORMATION TECHNOLOGY. DATA INTERCHANGE ON 12,7 MM WIDE MAGNETIC TAPE CARTRIDGES. 18 TRACKS, 1491 DATA BYTES PER MILLIMETRE. (EUROPEAN STANDARD EN ISO/CEI 9661).)
NF T60-2531-1998 NF T60-253-93的补充件1 ()
NF M03-018-2003 固体矿物燃料.氮含量测定 (Solid mineral fuels - Determination of nitrogen.)
NF T70-631-2-2003 民用爆炸物.烈性炸药.第2部分:测定爆炸物的热稳定性 (Explosives for civil uses - High explosives - Part 2 : determination of thermal stability of explosives.)
NF G62-102-2002 鞋类.鞋帮和鞋衬的试验方法.抗挠曲性 (Footwear - Test methods for uppers and lining - Flex resistance.)
NF F18-103-1990 铁路车辆.带外轴颈车轴用轴承车轴箱.材料.质量 (RAILWAY ROLLING STOCK. ROLLER BEARING AXLE BOXES FOR OUTSIDE AXLE JOURNALS. MATERIALS. QUALITY.)
NF A89-410-1977 可钎焊性.带可变间隙试样的定义和方法? (SOLDERABILITY AND BRAZEABILITY. DEFINITION AND USE OF A SPECIMEN WITH VARIABLE GAP.)
NF T47-210-1998 橡胶和塑料软管.暴露在氙弧灯下的试验.颜色和外观变化的测定 (Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance.)
NF D90-203-1998 羽毛和羽绒.试验方法.羽毛和羽绒数量组成的测定(手工方法) (Feather and down. Test methods. Determination of the quantitative composition of feather and down (manual method).)
NF T57-155-1998 塑料.热塑铸模化合物.SMC中纤维湿气级别测定 (Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC.)
NF V04-365-2000 脱脂乳、乳清和乳酪.脂肪含量的测定.重量分析法(参照法) (Skimmed milk, whey and buttermilk - Determination of fat content - Gravimetric method (Reference method).)
NF T73-421-1996 表面活性剂.以传输中的X、Y、Z三色值测定光学透明着色液体(产品)的比色特性 (Surface active agents. Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission.)
NF Z82-399-1-1999 帧中继服务.第1部分:一般描述 (Frame relay services. Part 1 : general description.)
NF T54-921-1997 塑料管道系统.热塑阀门.弯曲下温度周期变化后阀门完好性的测试方法 (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.)
NF D61-040-1-2000 办公家具.办公椅.第1部分:尺寸.尺寸的测定 (Office furniture - Office work chair - Part 1 : dimensions - Determination of dimensions.)
NF Z82-046-5-1998 集成服务数字网络(ISDN).初始比率通道.安全和防护.第5部分:界面 IB.防护 (Integrated Services Digital Network (ISDN). Primary rate access. Safety and protection. Part 5 : interface Ib. Protection.)
NF T47-268-1997 飞机加油用橡胶软管和软管组件.规范(EN I361) (Rubber hoses and hose assemblies for aviation fuel handling. Specification.)
NF E35-404-3-2000 制冷系统和热泵.安全和环境要求.第3部分:安装地点和个人保护 (Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3 : installation site and personal protection.)
NF P34-307-2000 金属片屋顶产品.铜锌片的自支持产品规范 (Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet.)
NF C96-037-2000 集成电路.生产线验收应用指南 (Integrated circuits - Manufacturing line approval application guideline.)
NF E48-152-1996 液压传动.气压蓄能器.气孔尺寸 (Hydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports.)
NF V04-285-1997 乳酪及其制品.柠檬酸含量的测定.酵催化方法 (Cheese and processed cheese products. Determination fo citric acid content. Enzymatic method.)
NF V37-012-1998 卷烟和过滤咀.公称直径的测定.使用激光束测量仪器的方法 (Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus.)
NF C63-422-2000 低压开关设备和控制设备组件.第2部分:母线中继系统的特殊要求(总线通道) (Low-voltage switchgear and controlgear assemblies - Part 2 : particular requirements for busbar trunking systems (busways).)
NF U26-029-1998 农用充气喷射装置.数据单.第1部分:典型布局 (Air-assisted agricultural sprayers. Data sheets. Part 1 : typical layout.)
NF P25-311-2001 工业,商业和车库门.使用动力操作门时的安全性.试验方法 (Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods.)
NF Z83-505-1996 蜂窝式数字通信系统(阶段2).移动站(MS)特点(GSM02.07) (Digital cellular telecommunications system (phase 2). Mobile stations (MS) features (GSM 02.07).)
NF X35-122-15-1998 具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第15部分:命令对话 (Ergonomic requirements for office work with visual display terminals (VDTs). Part 15 : command dialogues.)
NF T75-343-1987 香精油.西班牙野生百里香香精油 (Essential oils. Oil of spanish wild majoram ({Thymus} {Mastichina} {Linnaeus}).)
NF T20-342-1986 工业液化氨.试验方法 (Liquefied anhydrous ammoniac industrial use. Test methods.)
NF Z85-633-1998 传输和多路转换(TM).数字无线电继电系统(DRRS).在频率范围为2,1GHz至2,6GHz内操作的低容量和中容量点对点数 (Transmission and Multiplexing (TM). Digital Radio-Relay Systems (DRRS). Low and medium capacity point-to-point DDRS operating in the frequency range 2,1 to 2,6 GHz.)
NF J22-209/A1-2000 油艇.耐火燃料用软管 (Small craft - Fire resistant fuel hoses.)
NF A51-301-1998 铜和铜合金.一般用途棒材 (Copper and copper alloys - Rod for general purposes.)
NF C86-8161-1981 C86-816-76的补充1 ()
NF P78-455-1986 玻璃.镜子.隔热璃璃.刚性模量kv和扭曲能力测定方法 (GLAZING AND MIRRORS. INSULATING GLAZING. DETERMINATION METHOD OF THE STIFFNESS COEFFICIENT KV AND OF THE DISTORTION ABILITY.)
NF C82-242-2000 空白详细规范:低容许负荷导线绕制表面安装(SMD)的固定电阻 (Blank Detail Specification : fixed low power wire wound surface mounting (SMD) resistors.)
NF C61-440/A13-1998 NF EN 61009-1-1995的修改件13 ()
NF C61-320/A2-1986 NF C 61-320-1981的补充件2 ()
NF Z11-001-1982 信件的装璜 (Layout of letters.)
NF D38-305-1981 家政学.带冷冻室家用冰箱 (Home economic. Household refrigerators with freezers compartments.)
NF C93-562-1981 电子元件.弹簧栓耦接的小型同轴接头.一般规定 (Components for electronic equipment. Miniature coaxial connectors with snap-on coupling. General requirements.)
NF T45-138-2-1993 橡胶配方配合剂.炭黑.甲苯萃取物透光率的测定.第2部分:产品评定法 (RUBBER COMPOUDING INGREDIENTS. CARBON BLACK. DETERMINATION OF LIGHT TRANSMITTANCE OF TOLUENE EXTRACT. PART 2 : METHOD FOR PRODUCT EVALUATION.)
NF L65-211-1978 控制柜.尺寸安装规列 (CONTROL BOXES. DIMENSIONS AND PRINCIPLES GOVERNING INSTALLATION.)
NF T77-106-1987 工业硅树脂.粘度、挤压度(流动率)和CASSON粘度的测定.标准挤压喷嘴法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF EXTRUDABILITY (FLUIDITY) AND OF VISCOSITY “CASSON“. METHOD USING STANDARD EXTRUSION NOZZLE.)
NF S90-520-1973 外科医疗器械.矫形和假肢组件.带连接挂钩的可拆卸踝骨的连接 (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. DETACHABLE ANKLE JOINT WITH ASSEMBLY HOOK.)
NF S93-043-2003 导管.单腔导管和医用管扭结的试验方法 (Catheters - Test methods for kinking of single lumen catheters and medical tubing.)
NF T77-105-1985 工业硅树脂.水含量的测定.卡尔.费休法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.)
NF P75-208-1997 建筑物用热绝缘产品.规定温度和湿度的条件下尺寸稳定性的测定 (THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF DIMENSIONAL STABILITY UNDER SPECIFIED TEMPERATURE AND HUMIDITY CONDITIONS. (EUROPEAN STANDARD EN 1604).)
NF P98-283-1992 铺面试验.结构用防水材料.抗拉强度和变形的测定 (TESTS RELATING TO PAVEMENTS. WATERPROOFING MATERIALS FOR STRUCTURES. DETERMINATION OF TENSILE STRENGTH AND DEFORMATION.)
NF C93-1334-1987 C93-133-87的补充4 ()
NF Z83-600-1999 数字蜂窝电信系统(阶段2).对综合业务数字网(ISDN)或公共交换电话网(PSTN)和公共区域移动网(PLMN)之间相互作 ()
NF Z88-391-2-2000 通用个人电信(UPT).UPT第1段用安全结构规范.第2部分:说明执行一致性的表格 (Universal Personal Telecommunication (UPT) - Specification of the security architecture for UPT phase 1 - Part 2 : Implementation Conformance Statements (ICS) proformas.)
NF U14-503-1997 农用轮式拖拉机和机具.三点联结连接器.第3部分:环节连接器 (Agricultural wheeled tractors and implements. Three-point hitch couplers. Part 3 : link coupler.)
NF Z83-559-1998 数字蜂窝通信系统(相2).在可移动无线电界面上(GSM 04.11)的点对点(PP)短信号服务(SMS)支持 (Digital cellular telecommunications system (Phase 2). Point-to-Point (PP) Short Message Service (SMS) support on mobile radio interface (GSM 04.11).)
NF T51-009-1998 塑料.酚-甲醛模塑.游离氨和铵化合物的测定.比色法 (Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method.)
NF L23-162-2000 航空和航天.镀镉平钢垫圈 (Aerospace series - Washers, flat, in steel, cadmium plated.)
NF P99-201-2000 交通控制设备.警告和安全灯装置 (Traffic control equipment - Warning and safety light devices.)
NF C97-145-3-2000 专业用多路数字声频磁带记录(DATR)卷对卷系统.第3部分:16比特介质的24位操作 (Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 3 : 24-bit operation for 16-bit media.)
NF L15-155-2001 航空航天系列.铝和铝合金带.厚度≤0.25mm至≤3.2mm.尺寸 (Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm inferior or equal to a inferior or equal to 3,2 mm - Dimensions.)
NF S75-509-2002 焊接人员用防护手套 (Protective gloves for welders.)
NF E25-405-1-2001 六角头薄螺母(倒角的).产品等级A和B (Hexagon thin nuts (chamfered) - Product grades A and B.)
NF S91-181-2000 牙钻手柄.气动刮器和刮器梢头 (Dental handpieces - Air-powered scalers and scaler tips.)
NF S72-509-5-2000 防护头盔.试验方法.第5部分:保持系统强度 (Protective helmets - Test methods - Part 5 : retention system strength.)
NF E63-600/A1-2000 橡胶和塑料机.注模机的安全要求 (Rubber and plastics machines - Injection moulding machines - Safety requirements.)
NF C61-503/A22-2000 灯头、灯座及检验其互换性和安全性的量规.第3部分:量规 (Lamps caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges.)
NF C83-112/A1-1990 NF C 83-112-1988的补充件1 ()
NF F31-057-1991 铁路车辆.车速超过220km/H的客车车门.特性.操作.检查与试验 (Railway rolling stock. Carriage access doors with running speed greater than 220 km/H. Characteristics. Operating. Checks and tests.)
NF E38-325-2000 热交换器.强制对流式空气制冷压缩机.性能形成的试验过程 (Heat exchangers - Forced convection air cooled refrigerant condensors - Test procedure for establishing performance.)
NF V37-015-1-1997 卷烟.烟草端损失的测定.第1部分:旋转圆柱型盒法 (Cigarettes. Determination of loss of tobacco from the ends. Part 1 : method using a rotating cylindrical cage.)
NF E25-019-2000 紧固件.ISO米制外螺纹部件的端头 (Fasteners - Ends of parts with external ISO metric screw thread.)
NF T51-225-1998 塑料.长时间受热后时间-温度极限值的测定 (Plastics. Determination of time-temperature limits after prolonged exposure to heat.)
NF G07-121-1987 纺织.织物试验.织物和针织品的抗起绒球性的测定 (Textiles. Testing of fabrics. Determination of resistance to pilling of woven and knitted fabrics.)
NF P34-215-2-1993 DTU 40.45 建筑工程.私人合同.铜板和长形板制屋顶覆盖物.第1部分:特殊条款 (DTU 40.45 - Building works - Private contracts. Roof covering made of copper sheet and long sheet - Part 2 : special clauses.)
NF V15-021-1984 动物人工授精.牛的不受孕率的计算方法? (Artificial insemination of animals. Method of calculation of the non-return rate for bulls.)
NF G40-050-1990 纺织工业设备.纺纺和捻纱用器材.术语 (Spinning preparatory machinery, spinning and doubling (twisting) machinery. List of equivalent terms.)
NF G18-002-1982 天然或合成聚异戍二稀弹力线.拉力试验? (Natural or synthetic polyisoprene rubber threads. Tensile test.)
NF E25-118-1983 金属用螺钉.方头.C级.符号Q (Square head screws. Product grade C. Symbol Q.)
NF C93-594-1/A1-2003 波导法兰盘.第1部分:一般要求 (Flanges for waveguides - Part 1 : general requirements.)
NF T30-230-1985 涂料和清漆.氯含量的测定.氧化碱熔化法 (PAINTS AND VARNISHES. DETERMINATION OF CHLORINE CONTENT. OXYDATIVE ALKALINE FUSION METHOD.)
NF E63-132-1991 压机配套工具.调整杆.尺寸 (TOOLS FOR PRESSING. RING BOLT. DIMENSIONS.)
NF B57-058-2002 胶凝软木圆盘.试验方法 (Agglomerated cork discs -Test methods.)
NF Z84-329-1999 无线电设备和系统(RES).数字增强无芯远程通信(DECT)设备的电磁兼容性(EMC)(ETS 300329) (Radio Equipment and Systems (RES). ElectroMagnetic Compatibility (EMC) for Digital Enhanced Cordless Telecommunications (DECT) equipment.)
NF A51-304-1998 铜和铜合金.一般用途线材 (Copper and copper alloys - Wire for general purposes.)
NF L13-147-2001 航空航天系列.铜CU-BU9001.钎焊用填充金属.焊丝 (Aerospace series - Copper CU-BU9001 - Filler metal for brazing - Wire.)
NF Z85-636-1998 传输和多路转换(TM). 在频率范围为1GHz至3GHz内的点对多点数字无线电系统的时间分支多路通道(TDMA) (Transmission and Multiplexing (TM). Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz.)
NF Z82-046-1-1998 集成服务数字网络(ISDN).初始比率通道.安全和防护.第1部分:一般 (Integrated Services Digital Network (ISDN). Primary rate access. Safety and protection. Part 1 : general.)
NF T51-785-4-2000 塑料.升温条件下基于氯乙烯高聚物和共聚物的化合物和产品放出盐酸和其它酸类产品的趋势测定.第4部分:电位法 (Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperature)
NF V03-926-1993 油料种子残渣.试样制备 (Oilseed residues. Preparation of test samples.)
NF A37-602-3-2001 钢丝和丝产品.钢丝上的非有色金属涂层.第3部分:铝涂层 (Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3 : aluminium coatings.)
NF A82-104-1-2000 电阻焊接设备.电极接头,外锥度1:10.第1部分:圆锥形接头,锥度1:10 (Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.)
NF Z82-047-4-1998 集成服务数字网络(ISDN).基本通道.安全和防护.第4部分:界面IB.安全 (Integrated Services Digital Network (ISDN). Basic access. Safety and protection. Part 4 : interface Ib. Safety.)
NF C31-002-2000 特种绕组线规范.第0部分:一般要求.第2节:漆包扁铜线 (Specifications for particular types of winding wires - Part 0 : general requirements - Section 2 : enamelled rectangular copper wire.)
NF C93-171/A2-1990 NF C 93-171-1985的补充件2 ()
NF T90-355-1-2000 水质.江河的生物分类.第1部分:对海底微型无脊椎动物调查的生物质量数据的解释指南 (Water quality - Biological classification of rivers - Part 1 : guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates.)
NF A49-875-11-2000 钢管的无损检验.第11部分:检测表面缺陷用无缝和焊接钢管的液体渗透试验 (Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.)
NF X43-247-2000 工作场所空气.气载微生物和内生毒素的测量指南 (Workplace atmosphere - Guidelines for measurement of airborne micro-organisms and endotoxin.)
NF T54-926-2000 热塑性管道系统.地下常压排污设施用接头.用密封压力评定法测定带热塑性弹性体(TPE)密封件接头的长期密封性 (Thermoplastics piping systems - Joints for buried non-pressure sewage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the)
NF T76-406-2000 水硬地板刮铲混合物的试验方法.标准混合法 (Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures.)
NF Z82-754-1-2000 综合业务数字网(ISDN).信号系统7.交易能力(TC).信号等待指示(MWI)补充服务的应用服务元件(ASE).数字用户信 (Integrated Services Digital Network (ISDN) - Signalling System No. 7 - Transaction Capabilities (TC) - Application Service Element (ASE) for Message Waiting Indication (MWI) supplementary service - Pa)
NF X03-009-2001 术语标准化项目管理导则 (Project management guidelines for terminology standardization.)
NF P61-607-1998 瓷砖粘结剂.分散粘结剂剪切粘接强度的测定 (Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives.)
NF X50-001-5-2-1998 发电站设备的采购指南.第5-2部分:涡轮机.气体涡轮机 (Guide for procurement of power station equipment. Part 5-2 : turbines. Gas turbines.)
NF L15-515-2001 航空航天系列.铝合金挤压L型材.尺寸 (Aerospace series - Extruted L-section, in aluminium alloys - Dimensions.)
NF S95-201-1999 道路救护车中使用的担架和其他运输病人设备的规范 (Specifications for stretchers and other patient handling equipment used in road ambulances.)
NF S96-002-1999 助步器.一般要求和试验方法 (Walking aids. General requirements and test methods.)
NF S90-603-1985 轮椅.总尺寸、重量和转动空间 (Wheelchairs. Overall dimensions, mass and turning space.)
NF L24-512-2001 航空航天系列.钝化、耐热钢制、标准对边、高度降低的槽头/齿形头六角螺母.等级:900MPa(室温)/650℃ (Aerospace series - Nuts, hexagon, slotted / castellated, reduced height, normal across flats, in heat resisting steel, passivated - Classification : 900 MPa (at ambient temperature) / 650 o C.)
NF C65-100/A1-2000 电涌放电器.第1部分:交流系统用非线性电阻型间隙式电涌放电器 (Surge arresters - Part 1 : non-linear resistor type gapped surge arresters for a.c. systems.)
NF T50-001-1-2000 塑料.聚酰胺(PA)模塑和挤制材料.名称与符号 (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation.)
NF V04-412-2000 肉和肉制品.L-(+)-谷氨酸含量的测定(参考法) (Meat and meat products - Determination of L-(+)-glutamic acid content - Reference method.)
NF C32-1111-1985 C32-111-82的补充1 ()
NF C93-910-15-2001 光纤连接器接口.第15部分:LSH型连接器系列 (Fibre optic connector interfaces - Part 15 : type LSH connector family.)
NF H96-404-1977 装卸车.叉车.榫接式实心叉臂.尺寸 (FORK LIFT TRUCKS. HOOK-ON TYPE FORK ARMS. DIMENSIONS.)
NF S54-100-1983 儿童保育用品.家庭用露天横架.安全要求和试验 (OUTDOOR GYMNASTIC CLIMBING FRAMES FOR FAMILY USE. SAFETY REQUIREMENTS AND TESTING.)
NF S90-307-1990 外科医疗器械.细胞和血浆离心分离器(监视器和一次性用品).工作性能 (MEDICO-SURGICAL EQUIPMENT. CENTRIFUGE-TYPE BLOOD CELL AND PLASMA SEPARATORS (MONITORS AND SINGLE-USE KITS) SUITABILITY FOR USE.)
NF C96-260-6-2003 集成电路.150kHz-1GHz电磁辐射的测量.第6部分:传导辐射测量.磁探测器法 (Integrated circuits - Measurement of electromagnetic emissions, 150 kHz - 1 GHz - Part 6 : measurement of conducted emissions - Magnetic probe method.)
NF S54-201-6/A1-2003 游乐场设备.第6部分:摇椅设施的附加特殊安全要求和试验方法 (Playground equipment - Part 6 : additional specific safety requirements and test methods for rocking equipment.)
NF J41-465-1957 造船工业.“金士顿“阀门.螺钉零件 (SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)
NF P71-201-1-1993 DTU 25-1.建筑工程.内壁石膏灰浆.第1部分:技术规范 (DTU 25-1. BUILDING WORKS. INTERNAL GYPSUM PLASTERING. PART 1 : TECHNICAL SPECIFICATIONS.)
NF C20-115-1971 标定截面不超过2.5mm**2,线芯无特殊预加工的硬铜导线连接的无螺钉接线端 (TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF THE CONDUCTOR.)
NF X50-001-6-7-1998 发电站设备的采购指南.第6-7部分:涡轮机附件.潮气隔离再加热器 (Guide for procurement of power station equipment. Part 6-7 : turbine auxiliaries. Moisture separator reheaters.)
NF S10-102-1997 光学和光学仪器.激光及激光相关设备.非电信激光设备用光纤连接器 (Optics and optical instruments. Lasers and laser-related equipment. Fibre optic connectors for non-telecommunication laser applications.)
NF X42-308-1997 生物技术.环境应用的改造机制.改造厂的慎重排放导则 (Biotechnology. Modified organisms for application in the environment. Guidance for the sampling strategies for deliberate releases of genetically modified plants.)
NF C93-537-3-4-2001 通信电缆.试验方法规范.第3-4部分:机械试验方法.绝缘体和护套的抗张强度、弹性和伸缩性 (Communication cables - Specifications for test methods - Part 3-4 : mechanical test methods - Tensile strength, elongation and shrinkage of insulation and sheath.)
NF X50-001-1-1998 动力站设备的征购指南 (Guide for procurement of power station equipment. Part 1 : common clauses.)
NF X50-915-2000 水疗法的创立.对病人的服务.要求和推荐规程 (Hydropathic establishments (Spas) - Services to patients - Requirements and recommendations.)
NF Z84-445-1998 无线电设备和系统(RES).无线话筒和类似的射频(RF)音频链接设备的电磁兼容性(EMC)标准 (Radio Equipment and Systems (RES). Electro-Magnetic Compatibility (EMC) standard for wireless microphones and similar Radio Frenquency (RF) audio link equipment.)
NF S61-203-2000 固定的消防系统.软管系统.第3部分:带半钢性软管的软管卷曲机和带扁平软管的软管设备的维修 (Fixed firefighting systems - Hose systems - Part 3 : maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose.)
NF H96-112-2-1999 垃圾收集用提升设备.第2部分:容量500-1300升的移动废料容器用转轴式提升设备的技术规范和安全要求 (Lifting devices for refuse collection. Part 2 : technical specifications and safety requirements concerning trunnion lifting devices used for mobile waste containers with capacities from 500 l to 1 300 l.)
NF V03-091-2-1999 非油脂食品.二硫代氢基甲酸酯氨荒酸盐和二硫化四烷秋兰姆残余量的测定.第2部分:气相色谱法 (Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Part 2 : gas chromatographic method.)
NF T51-177-1998 塑料.环氧树脂的硬化剂和促进剂.第1部分:标识 (Plastics. Hardeners and accelerators for epoxide resins. Part 1 : designation.)
NF C68-146-2000 电气设备用电缆连结件 (Cables ties for electrical installations.)
NF C61-501/A26-2001 灯头和灯座以及互换性和安全性控制用量规.第1部分:灯头 (Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 : lamp caps.)
NF H50-010-2-2000 货架接头试验方法.第2部分:货架钉子和钩环头拉伸抗性和回缩特性的测定 (Methods of test for pallet joints - Part 2 : determination of withdrawal and head pull-through resistance of pallet nails and staples.)
NF F66-881-2000 铁路应用.滚动运货设备.动力电电容器 (Railway applications - Rolling stock equipment - Capacitors for power electronics.)
NF M07-079-2-2000 液化石油产品.蒸气压力.第2部分:40度和100度之间绝对蒸气压力的测定 (Liquid petroleum products - Vapour pressure - Part 2 : determination of absolute vapour pressure (AVP) between 40 oC and 100 oC.)
NF T20-720-1984 工业酚.试验方法 (Phenol for industrial use. Methods of test.)
NF F03-301-1988 铁路车辆.货车拖车和类似车辆的负载和状态 (ROLLING STOCK. WEIGHTS AND STATES OF LOAD OF WAGONS AND ASSIMILATED VEHICLES FREIGHT.)
NF C61-505/A3-1996 NF EN 60061-4-1993的修改3 ()
NF X35-122-2-1993 具有可视显示终端(VDTs)的办公室工作的人类工效学要求.第2部分:工作要求指南 (Ergonomic requirements for office work with visual display terminals (vdts). Part 2 : guidance on task requirements.)
NF S95-162-1998 医用气体管道系统.第1部分:医用压缩气体和真空装置的终端元件 (Medical gas pipeline systems. Part 1 : terminal units for compressed medical gases and vacuum.)
NF P11-221-1-2000 DTU 14.1.建筑工程.油罐装置.第1部分:技术规范 (DTU 14.1 - Building works - Tanking works - Part 1 : technical specification.)
NF X31-415-1995 土壤质量.溶于王水中的痕量元素的萃取? (Soil quality. Extraction of trace elements soluble in aqua regia.)
NF Z13-481-1995 EDI.信息.软(CONTEN) (EDI. Message. Tender (CONTEN).)
NF M06-006-2000 石油工业.术语.第5部分:运输储藏和分配 (Petroleum industry - Terminology - Part 5 : transport, storage, distribution.)
NF T31-010-1-2000 涂料用二氧化钛颜料.第1部分:规范和试验方法 (Titanium dioxyde pigments for paints - Part 1 : specifications and methods of test.)
NF C83-110/A5-1984 NF C 83-110-1981的补充件5 ()
NF Z82-840-2000 电信安全.综合业务数字网(ISDN).视听服务的可信系统 (Telecommunications Security - Integrated Services Digital Network (ISDN) - Confidentiality system for audiovisual services.)
NF C93-406-3-001-2000 直流低频模拟设备和高速数字数据应用设备用连接器.第3-001部分:经质量评定的矩形连接器.空白详细规范 (Connectors for use in d.c., low-frequency ananlogue and digital high-speed data applications - Part 3-001 : rectangular connectors with assessed quality - Blank detail specification.)
NF Z82-675-2000 综合业务数字网(ISDN).声音图像会议的远程服务.服务描述 (Integrated Services Digital Network (ISDN) - Audiographic conference teleservice - Service description.)
NF A53-705-1999 铜和铜合金.铸块和铸件 (Copper and copper alloys - Ingots and castings.)
NF V03-340-1981 茶叶.取样 (Tea. Sampling.)
NF T60-313-1990 肥皂和洗涤剂.熬合剂含量的测定.滴定法 (Soaps and detergents. Determination of chelating agent content. Titrimetric method.)
NF L10-600-1/A1-1993 修改件1 ()
NF A06-718-1986 铜和铜合金.磷含量的测定.分子吸收分光光度法 (Copper and copper alloys. Determination of phosphorus content. Molecular absorption spectrophotometric method.)
NF C73-835-2000 家用和类似用途电器的安全.第2-35部分:水瞬时加热器的特殊要求 (Safety of household and similar electrical appliances - Part 2-35 : particular requirements for instantaneous water heaters.)
NF P34-215-1-1993 DTU 40-45.建筑工程.铜板和长形板制屋顶覆盖物.第1部分:技术规范 (DTU 40-45. Building works. Roof covering made of copper sheet and long sheet. Part 1 : technical specifications.)
NF T54-039-1988 塑料.未增塑聚氯乙烯压力管用密封圈的固定接头.使用特性.规范 (Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.)
NF T20-337-1984 工业用含水氢氟酸.取样和试验方法 (Aqueous hydrofluoric acid for industrial use. Sampling and methods of test.)
NF C73-878-2000 家用和类似用途电器的安全.第2-78部分:户外烧烤架的特殊要求 (Safety of household and similar electrical appliances - Part 2-78 : particular requirements for outdoor barbecues.)
NF A89-010-3/A1-1997 NF EN 288-3-1992的修改件1 ()
NF V03-718-1994 小麦粉和硬粒小麦麦麸.动物源杂质的测定 (Wheat flour and {durum} wheat semolina. Determination of impurities of animal origin.)
NF Q34-037-2000 薄纸和薄纸产品.第7部分:光性能测定 (Tissue paper and tissue products - Part 7 : determination of optical properties.)
NF E29-902-4-1997 法兰及其接头.PN指定法兰用垫圈的尺寸.第4部分:与钢法兰配套使用的波纹形、平的或开槽金属和填充金属垫圈 (Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.)
NF L22-189-1976 有BNAE十字槽锥顶120°埋头螺钉.国际单位米制螺纹 (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF F72-010-1991 铁路固定设备.数据处理.由点到点到双向不同步序列传输的程序 (FIXED RAILWAY EQUIPMENT. DATA PROCESSING. BIDIRECTIONNAL SERIAL ASYNCHRONUS TRANSMISSION PROCEDURES TYPE “POINT TO POINT“.)
NF B54-509-1953 木材.工具柄.带曲柄颈的粪叉柄 (WOOD. TOOL HANDLES. HANDLES OF MANURE FORKS,TONGUE TYPE.)
NF U51-433-1-1999 灌溉设备.绕线机械系统.第1部分:尺寸系列 (IRRIGATION TECHNIQUES. REEL MACHINE SYSTEMS. PART 1 : SIZE SERIES. (EUROPEAN STANDARD EN 12324-1).)
NF F19-350-1998 铁路滚动存货车.线圈涂层板铝和铝合金? (RAILWAY ROLLING STOCK. COIL COATED SHEETS ALUMINIUM AND ALUMINIUM ALLOYS.)
NF C46-903-22-2001 配电线路载体系统的配电自动化.第3-22部分:主要信令要求.MV相位到地面和网屏到地面的侵入式耦合装置 (Distribution automation using distribution line carrier systems - Part 3-22 : mains signalling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices.)
NF C47-7331-1998 1992年NF C 47-733的补充件1 ()
NF T54-912-1995 热塑.管道.环硬性的测量 (THERMOPLASTICS. PIPES. DETERMINATION OF RING STIFFNESS. (EUROPEAN STANDARD EN ISO 9969).)
NF J95-023/A1-2000 小艇.远程掌舵系统 (Small craft - Remote steering systems.)
NF E37-211-6-2000 往复式内燃机.废气排放的测量. 第6部分:测量结果和试验的报告 (Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test.)
NF C23-570-2000 电磁兼容性.可燃气体、有毒气体或氧气的检测和测量用电气设备 (Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.)
NF H60-100-2000 包装.专用于加工和组成的要求.资源减少的防止 (Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction.)
NF U42-001/A2-1984 NF U 42-001-81的补充件2 ()
NF A73-522-2000 铸造.用熔模铸造法制造熔模模型用设备 (Founding - Equipment for the production of lost patterns for the lost wax casting process.)
NF C51-318-21/A1+A2-2000 旋转电机.第18部分:绝缘系统的功能评定.第21节:绕组线的试验方法.热评定和分类 (Rotating electrical machines - Part 18 : functional evaluation of insulation systems - Section 21 : test procedures for wire-wound windings - Thermal evaluation and classification.)
NF V05-221-1983 速溶咖啡.减压后70℃温度时重量损失的测定 (Instant coffee. Determination of loss in mass at 70 degrees under reduced pressure.)
NF J95-025/A1-2000 小艇.发动机为15W到40W动力的单舷外发动机用远程控制系统 (Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power.)
NF V05-322-1991 固体速溶茶.总灰分测定 (Instant tea in solid form. Determination of total ash.)
NF C96-628-1-2000 频率控制和选则用表面安装的压电器件.标准外形和终端引线的连接.第1部分:塑料模压外壳外形 (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1 : plastic moulded enclosure outlines.)
NF E29-962-1987 工业管道.大气污染物进气管道.补充金属部件.规范 (Industrial pipework. Suction pipe for atmospheric pollutants. Additionnal metal components . Specifications.)
NF A05-151-1984 钢铁产品.用硫印法进行宏观照相检查(鲍法) (Steel products. Macrographic examination by sulfur print (Baumann method).)
NF V37-006-1993 烟草和烟草制品.碱含量的测定.光谱测定法 (Tobacco and tobacco products. Determination of alkaloid content. Spectrometric method.)
NF P15-201-1/A2-1999 补充件2 ()
NF P25-305-2000 工业,商业和车库门.空气渗透性.试验方法 (Industrial, commercial and garage doors and gates - Air permeability - Test method.)
NF C60-010-2000 连接装置.铜电线用螺旋式和非螺旋式夹紧装置的安全要求.第1部分:从0.2mm2到包括35mm2导线夹紧装置的特殊要 (Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1 : general requirements and particular requirements for clamping units)
NF T47-305-2-2000 弹性密封件.水和排水设施用管接头密封件材料的要求.第2部分:热塑性弹性材料 (Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers.)
NF T51-501-1999 塑料.不饱和聚酯树脂和环氧树脂.体积总收缩率的测定 (Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.)
NF S72-409-2000 登山设备.登山者用头盔.安全要求和试验方法 (Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods.)
NF V03-902-1995 油料种子.将实验室样品缩分为分析试样? (Oilseeds. Reduction of laboratory sample to test sample.)
NF Z82-399-2-2001 帧中继服务.第2部分:综合业务数字网.帧中继数据承载业务.服务定义 (Frame relay services - Part 2 : Integrated Services Digital Network (ISDN) - Frame relay bearer service - Service definition.)
NF C26-250/A1-1983 NF C 26-250-1963的补充件1 ()
NF Z68-300-12-1993 工业自动化.数据交换和转换标准规范.第12部分:电路简图 (INDUSTRIAL AUTOMATION. DATA EXCHANGE AND TRANSFER STANDARD SPECIFICATION. PART 12 : ELECTRICAL SCHEMATIC.)
NF X31-419-1998 土壤质量.用硫铬氧化法测定有机碳 (SOIL QUALITY. DETERMINATION OF ORGANIC CARBON BY SULFOCHROMIC OXIDATION.)
NF C54-1012-1987 C54-101-87的补充2 ()
NF P36-402-1989 金属制接水槽 (RAINWATER GOODS. METALLIC GUTTERS,SQUARE ANGLES AND OUTLETS. SPECIFICATIONS.)
NF T13-004-1967 片状白云母.尺寸.外形特性 (MUSCOVITE MICA IN SPLITTINGS. DIMENSIONS. APPEARANCE CHARACTERISTICS.)
NF U02-020-1997 农林机械.喷雾器和液体肥料撒播器.安全(欧洲标准EN 907) (AGRICULTURAL AND FORESTRY MACHINERY. SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS. SAFETY. (EUROPEAN STANDARD EN 907).)
NF P23-404-1959 木作.木制系列窗.尺寸 (WOOD JOINERY. MASS PRODUCED WOODEN WINDOWS. DIMENSIONS.)
NF X06-034-2000 生产手段和工艺过程的适应性.在接受新生产手段时或者起动一种新的生产工艺时应用 (Aptitude of production means and processes - Application at time of receipt of new production means or at time of start-up of a new production.)
NF A91-473-2001 锌、镉、铝锌合金和锌铝合金的铬酸盐转化涂层.试验方法 (Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods.)
NF L58-327-1966 飞机电气设备.17安转向四极开关小型密封继电器 (SWITCHGEAR FOR AIRCRAFT. 10 AMPERES MINIATURE SEALED REVERSE CURRENT 4-POLE RELAYS.)
NF C93-400-23-3-2001 电子设备用电机元件.基本试验过程和测量方法.第23-3部分:试验23c.连接件和附属件的屏蔽效应 (Electromechanical components for elctronic equipment - Basic testing procedures and measuring methods - Part 23-3 : test 23c : shielding effectiveness of connectors and accessories.)
NF P72-203-2-1993 DTU 25-41.建筑工程.私人合同.石膏板.石膏墙板.第2部分:特殊条款 (DTU 25-41. BUILDING WORKS. PRIVATE CONTRACTS. GYPSUM PLASTERBOARD WORKS. GYPSUM WALLBOARDS. PART 2 : SPECIAL CLAUSES.)
NF T76-500-1981 防水涂层纸.每平方米涂料和每平方米无水涂料的重量测定(每平方米克重) (Coated papers reactive to water. Determination of the mass per square metre (grammage) of the coating and the anhydrous coating.)
NF L22-568-2000 航空用螺栓和螺母.单耳埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat)
NF T90-105-2-1997 水质.悬浮固体的测定.离心法 (Water quality. Determination of suspended solids. Method by centrifugation.)
NF V03-003-2001 食品.照射食品中纤维素含量的探测.ESR的光谱色谱分析法 (Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy.)
NF P84-118-2000 防水用柔性薄板.屋面防水用沥青、塑料和橡胶薄板.水密性测定 (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness.)
NF T31-111-2000 涂料稀释剂.规范和试验方法.第14部分:方晶石 (Extenders for paints - Specifications and methods of test - Part 14 : cristobalit.)
NF T94-420-2000 人类饮用水处理用化学品.过氧化二硫酸钠 (Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate.)
NF T57-050-1977 玻璃织物增强塑料.调节和试验用标准大气压 (Glass reinforced plastics. Standard atmospheres for conditioning and testing .)
NF R16-337-2000 喷油装置.词汇.第3部分:整体式喷油器 (Fuel injection equipment - Vocabulary - Part 3 : unit injectors.)
NF C97-001-4-2000 数字音频接口.第4部分:专业应用 (Digital audio interface - Part 4 : professional applications.)
NF P41-220/A1-1999 DTU 60.2.建筑工程.土壤水,雨水,废水排水铸铁管道的技术规范 (DTU 60.2 - Building works - Cast ison pipes for soil water, rain water and waste water drainage - Technical specification.)
NF E52-037-2-2000 吊链元件.安全性.第2部分:有栓的锻压钢提钩.8级 (Components for slings - Safety - Part 2 : forged steel lifting hooks with latch - Grade 8.)
NF E65-100-3-2000 手持非电动工具.安全要求.第3部分:钻孔机和攻丝机 (Hand-held non-electric power tools - Safety requirements - Part 3 : drills and tappers.)
NF A89-250-2-1994 焊接的质量要求.金属材料的熔焊.第2部分:全面质量系统 (Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.)
NF D21-002-3-2000 与食品接触的材料和用品.家用保温容器.第3部分:热包装材料规范 (Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 3 : specification for thermal packs.)
NF H34-040-1-2000 包装.小负荷搬运系统.第1部分:一般要求和试验方法 (Packaging - Small load carrier systems - Part 1 : common requirements and test methods.)
NF T90-360-1997 水的试验.吸收能力的测定.吸油能力 (Testing water. Determination of absorbent power. Oil retention capacity.)
NF C93-561-1981 电子元件.螺钉锁定的小型同轴接头.一般规定 (Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.)
NF S74-503-1992 防护服.试验方法:材料接触熔化金属飞溅时特性的测定 (Protective clothing. Test method : determination of behaviour of materials onimpact of small splashes of molten metal.)
NF T29-001-1968 化学产品.摄影用化学产品.亚硫酸钠 (CHEMICAL PRODUCTS. PHOTOGRAPHIC GRADE CHEMICAL PRODUCTS. SODIUM SULPHITE.)
NF T20-742-1967 马来酐和酞酐的化学分析.灰分的测定 (CHEMICAL ANALYSIS OF MALEIC AND PHTHALIC ANHYDRIDES. DETERMINATION OF ASH.)
NF T90-420-1987 水的试验.饮用水的细菌学检验 (TESTING WATER. BACTERIOLOGICAL EXAMINATIONS OF DRINKING WATER.)
NF D64-001-1998 家具.床和垫子.安全要求和试验方法 (DOMESTIC FURNITURE. BEDS AND MATTRESSES. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 1725).)
NF L52-250-404-2002 航空航天系列.飞行器用电缆.试验方法.第404部分:热冲击 (Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404 : thermal shock.)
NF B57-055-1977 软木.胶合地板绝缘层用胶结软木.性能 (CORK.COMPOUND AGGLOMERATED CORK FOR INSULATION UNDERLAYS FOR PARQUETS INTENDED TO BE GLUED.CHARACTERISTICS.)
NF B20-002-1983 矿物纤维绝缘产品.取样要求 (MINERAL FIBER BASED INSULATION PRODUCTS. SAMPLING REQUIREMENTS.)
NF J41-314-1957 造船工业.集水阱.型号II.方型凸缘体? (SHIPBUILDING. MUD TRAPS. TYPE II. BODY WITH FLANGES AT RIGHT ANGLES.)
NF Z74-020-1991 信息处理.计算机制图.64位字组码算法的操作方法 (INFORMATION PROCESSING. MODES OF OPERATION FOR A 64-BIT BLOCK CIPHER ALGORITHM.)
NF J42-105-1952 造船工业.内部排水.简单排水器 (SHIPBUILDING. INTERNAL SCUPPERS. SINGLE SCUPPERS.)
NF A45-323-1990 冶金产品.35G SF槽形钢轨及其鱼尾板 (IRON AND STEEL. 35 G.SF GROOVED RAIL AND ITS FISH PLATES.)
NF A84-330-1982 气焊设备.乙炔发生器用“防回气—断火”的液压安全阀和组合装置.规范和试验 (GAS WELDING EQUIPMENT. HYDRAULIC SAFETY SEALS AND COMBINED “NON-RETURN VALVE/FLAME ARRESTOR“ DEVICES FOR ACETYLENE GENERATORS. REQUIREMENTS AND TESTS.)
NF H44-017-1988 烟雾发生器.金属容器.铝制25.4mm容器尺寸 (AEROSOL DISPENSERS. METAL CONTAINERS. DIMENSIONS OF ALUMINIUM MONOBLOC CONTAINERS WITH 25,4 MM APERTURE.)
NF E90-322-2/A2-2002 便携式手提电动工具.手柄振动的测量.第5部分:建筑工程用柏油路破碎机和錾平锤 (Hand-held portable power tools - Measurement of vibrations at the handle - Part 5 : pavement breakers and hammers for construction work.)
NF B49-429-1996 菱美矿和白云石.化学分析 (Magnesites and dolomites. Chemical analysis.)
NF Z84-698-1-2001 电磁兼容性和无线电频谱情况(ERM).国内水道用运行在VHF波段的海上移动业务用无线电话发射机和接收机.第1部 (Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways - Part 1)
NF C42-544-7-2001 仪表用变压器.第7部分:电子变压器 (Instrument transformers - Part 7 : electronic voltage transformers.)
NF X10-232-1987 空气的分配和扩散.等温空气喷孔.空气的动力学试验及其特性表示法 (AIR DISTRIBUTION AND AIR DIFFUSION. LABORATORY AERODYNAMIC TESTING AND RATING OF AIR TERMINAL DEVICES IN A ISOTHERMAL AIR DISCHARGE.)
NF Z73-040-21-1994 NF Z73-040-2 94年12月的补充件1 ()
NF E86-900-1981 钢贮槽.防腐涂层.最低技术规范 (STEEL STORAGE TANKS. ANTICORROSIVE COATING. MINIMUM TECHNICAL REQUIREMENTS.)
NF Z68-300-8-1993 工业自动化.数据交换和转换标准规范.第8部分:几何 (INDUSTRIAL AUTOMATION. DATA EXCHANGE AND TRANSFER STANDARD SPECIFICATION. PART 8 : GEOMETRY.)
NF S73-503-1993 专用防护鞋靴规范.(欧洲标准EN 346) (Specification for protective footwear for professional use.)
NF A89-700-5-2000 焊接.电子束焊接机的认可检验.第5部分:电子束放出精确度的测量 (Welding - Acceptance inspection of electron beam welding machines - Part 5 : measurement of run-out accuracy.)
NF L22-589-2000 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/23 (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe)
NF L22-576-2000 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien)
NF P84-126-2-2000 防水用挠性薄板.接缝耐剪切性测定.第2部分:屋面防水用塑料和橡胶薄板 (flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2 : plastics and rubber sheets for roof waterproofing.)
NF C83-150/A1-1981 NF C 83-150-1981的补充件1 ()
NF X41-539-1990 木材防腐剂.对网状叶脉预生山道年的预防作用的测定(实验室法) (Wood preservatives. Determination of preventive action against reticulitermes santonensis de feytaud (laboratory method).)
NF X50-001-7-2-2000 动力站设备和系统的征购指南.第7部分:管道和阀门.第2节:锅炉和高压管道阀门 (Guide for procurement of power station plant, equipment and systems - Part 7 : pipework and valves - Section 2 : boiler and high pressure piping valves.)
NF C15-170-2000 船用电气装置.第507部分:游乐艇 (Electrical installations in ships - Part 507 : pleasure craft.)
NF C83-131/A1-1981 NF C 83-131-1981的补充件1 ()
NF U03-024-1-2000 农用拖车和自推动设备.考虑到灰尘和植物健康产品的空气净化室的性能.要求和试验.第1部分:空气净化装置 (Agricultural tractors and self-propelled equipment - Performance of air purifyied cabs with respect to dust and plant health products - Requirements and tests - Part 1 : air purification devices.)
NF C33-221-1990 电力系统用绝缘电缆或保护电缆.额定电压3,6/6(7.2)kV的道路和街道照明用同轴电缆 (Insulated or protected cables for power system concentric cables for road and street lighting for rated voltage of 3,6/6 (7,2) kv.)
NF A89-250-4-1994 焊接的质量要求.金属材料的熔焊.第4部分:基本质量要求 (Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.)
NF C73-806-2000 家用和类似用途电器的安全.第2-6部分:固定烹调灶具、炉架、烤炉和类似用具的特殊要求 (Safety of household and similar electrical appliances - Part 2-6 : particular requirements for stationary cooking ranges, hobs, ovens and similar appliances.)
NF T94-423-2000 人类用水的处理试剂.紧急情况使用的化学试剂.Trichloroisocyanuric acid (Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid.)
NF E22-337-1-2000 滚动轴承.公差.第1部分:术语和定义 (Rolling bearings - Tolerances - Part 1 : terms and definitions.)
NF V05-251-1983 咖啡.咖啡碱含量测定 (Coffee. Determination of caffeine content.)
NF A03-253-1972 铝和铝合金.铜和铜合金.维氏硬度试验.0.2-120公斤力的试验负荷 (Aluminium and aluminium alloys. Copper and copper alloys. Vicker hardness. Test-loads ranging from 0,2 to 120 kgf.)
NF P12-311-2000 圬工灰浆的试验方法.第11部分:硬化灰浆的柔性和压缩强度的测定 (Methods of test for mortar for masonry - Part 11 : determination of flexural and compressive strength of hardened mortar.)
NF X10-319-1991 明渠液体流量测量.圆头水平宽顶堰 (Liquid flow measurement in open channels. Round-nose horizontal broad-crested weirs.)
NF V03-776-1991 豆科作物.杂物、大小、异味、虫害、外形以及品种的测定.试验方法 (Pulses. Determination of impurites, size, foreign odours, insects and species and variety. Test methods.)
NF T57-106-1977 玻璃织物增强塑料.BARCOL硬度计法测量硬度 (Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .)
NF J95-030/A1-2000 小艇.始于齿轮的保护 (Small craft - Start-in-gear protection.)
NF T25-110-2-1999 碳纤维纱.第2部分:试验方法和总规范 (CARBON FIBRE YARNS. PART 2 : TEST METHODS AND GENERAL SPECIFICATIONS. (EUROPEAN STANDARD EN 13002-2).)
NF P98-253-2-1996 路面试验.沥青混合料的试验永久性变形.第2部分:反复正弦压缩试验 (TEST RELATING TO PAVEMENTS. BITUMINOUS MIXTURES PERMANENT DEFORMATION. PART 2 : REPEATED SINUSOIDAL COMPRESSION TEST.)
NF T20-593-1965 工业尿素的化学分析.总铁含量的测定 (CHEMICAL ANALYSIS OF UREA FOR TECHNICAL USE. DETERMINATION OF TOTAL IRON.)
NF T73-207-1978 表面活性剂.氯化钠含量的测定.电位计法 (SURFACE ACTIVE AGENTS. DETERMINATION OF THE SODIUM CHLORIDE CONTENTPOTENTIOMETRIC METHOD.)
NF R41-150-1970 托车和半托车.空气压力制动连接 (TRAILERS AND SEMI-TRAILERS.AIR-PRESSURE BRAKING CONNECTIONS.)
NF A51-600-1999 铜及铜合金.废钢 (COPPER AND COPPER ALLOYS. SCRAP. (EUROPEAN STANDARD EN 12861).)
NF T34-553-1995 涂料和清漆.通过涂料保护系统对钢结构的腐蚀保护.分析方法 (PAINTS AND VARNISHES. CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINTS SYSTEMS. METHODS OF ANALYSIS.)
NF E32-110-10-2002 水管锅炉和辅助设备.第10部分:防过压安全阀的要求 (Water-tube boilers and auxiliary installations - Part 10 : requirements for safeguards against excessive pressure.)
NF T25-102-1997 碳纤维.单丝样品抗拉性能的测定 (CARBON FIBRE. DETERMINATION OF THE TENSILE PROPERTIES OF SINGLE-FILAMENT SPECIMENS.)
NF J41-446-1957 造船工业.“金士顿“阀门.下导杆 (SHIPBUILDING. KINGSTON VALVES. LOWER GUIDE.)
NF M88-705-1990 液态烃化合物的分配装置.工业丁烷或丙烷用钢瓶.检验和定期试验 (EQUIPMENT FOR THE DISTRIBUTION OF LIQUEFIED HYDROCARBONS. WELDED STEEL CYLINDERS FOR COMMERCIAL BUTANE OR PROPANE. PERIODIC INSPECTIONS AND TESTS.)
NF Q31-011-1983 纸.文具包括活页纸的纸制品.外廓尺寸 (Paper. Trimmed sizes of stationery articles containing detachable sheets.)
NF V59-001-1982 食用胶.技术条件 (Food products. Edible gelatine. Specifications.)
NF V03-092-1-2000 非含脂食品.溴化物残留的测定.第1部分:无机溴化物总量的测定 (Non-fatty food - Determination of bromide residues - Part 1 : determination of total bromide as inorganic bromide.)
NF A89-101-3-2000 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊 (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.)
NF G37-107-2000 橡胶或塑料涂层织物.涂层粘附的测定 (Rubber- or plastics-coated fabrics - Determination of coating adhesion.)
NF T20-166-1986 生产铝用碳质材料.电极用沥青.水分测定.共沸蒸馏法(迪安斯塔克法) (Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of weter content. Azeotopic distillation (dean and stark) method.)
NF H90-211-1-2000 交换体.防水帆布.第1部分:最低要求 (Swap bodies - Tarpaulines - Part 1 : minimum requirements.)
NF T30-402-1998 涂料和清漆用粘合剂.酸值的测定.滴定分析法 (Binders for paints and varnishes. Determination of acid value. Titrimetric method.)
NF A35-017-1996 钢筋混凝土用钢筋.不可焊带筋钢条和线材 (Concrete reinforcing steels. Non weldable ribbed bars and wire rods.)
NF T51-511-2000 塑料(聚脂树脂)、涂料和清漆(粘合剂).部分酸值和全部酸值的测定 (Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value.)
NF A82-041-1987 电阻焊接.汽车工业中多点焊接用的带分离式二次线组的变压器.特殊规范 (Resistance welding. Transformers with two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.)
NF P43-001-2000 建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求 (Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)
NF E25-402-2001 六角头螺母.产品等级C (Hexagon nuts - Product grade C.)
NF U51-700-2000 灌溉技术.移动灌溉供水的快速耦合管.技术特性和试验 (Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing.)
NF V03-040-1993 农产食品.粗纤维含量的测定.通用方法 (Agricultural food products. Determination of crude fibre. General method.)
NF E37-211-9-2000 往复式内燃机.废气排放的测量. 第9部分:瞬间条件下压缩点火引擎内燃气烟雾排放的试验床测量用试验周期和试 (Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition en)
NF P50-752-2000 建筑物热性能.建筑物元件和单元的空气渗透性.实验室试验方法 (Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method.)
NF S72-509-6-2000 防护头盔.试验方法.第6部分:视野 (Protective helmets - Test methods - Part 6 : field of vision.)
NF T51-010-1998 塑料.酚-甲醛模塑.单体酚的测定.碘量法 (Plastics. Phenol-formaldehyde mouldings. Detection of free phenols. Iodometric method.)
NF P84-125-2-2000 防水用挠性薄板.接缝耐剥离性测定.第2部分:屋面防水用塑料和橡胶薄板 (Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2 : plastic and rubber sheets for roof waterproofing.)
NF V04-411-1983 肉和肉制品.葡萄酸-δ-内酯含量的测定(参考法) (Meat and meat products. Determination of glucono-delta-lactone content (reference method).)
NF C96-013-3-2000 半导体装置的机械标准化.第3部分:集成线路轮廓绘图准备的一般规则 (Mechnical standardization of semiconductor devices - Part 3 : general rules for the preparation of outline drawings of integrated circuits.)
NF Q50-019-1-2000 纸浆.物理试验用实验室纸张的制备.第1部分:常规纸张成型设备法 (Pulps - Preparation of laboratory sheets for physical testing - Part 1 : conventional sheet-former method.)
NF E48-065-1-2000 一般用途和液压动力连接.带弹性体密封或金属对金属密封的ISO 261螺纹的孔和钝末端.第1部分:螺纹孔 (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports.)
NF C31-699-2001 特种绕阻线规范.第49部分:玻璃纤维绕阻线树脂或包漆裸露圆铜线温度指数180 (Specifications for particular types of winding wires - Part 49 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire temperature index 180.)
NF T60-259-1998 动植物脂肪和油.垃维邦德颜色测定 (Animal and vegetable fats and oils. Determination of Lovibond colour.)
NF X50-806-2000 运输服务.好的运输链.性能条件声明系统 (Transportation services - Good transport chains - System for declaration of performance conditions.)
NF C83-401-1986 电子元器件质量评定协调体系.印刷电路板双面和边缘接插件.分规范和空白详细规范 (Harmonized system of quality assessment for electronic components two parts and edge socket connectors for printed board application sectional specification and blank detail specification CECC 75 100 and CECC 75 101.)
NF C83-131/A3-1981 NF C 83-131-1981的补充件3 ()
NF P15-201-2/A1-1994 DTU 26.1.NF P 15-201-2-1993的修改件1 ()
NF X31-117-1994 土壤质量.PH值测定 (Soil quality. Determination of ph.)
NF E78-003-1946 工具柄.铲和圆眼镐 (TOOL FIT. ROUND HOLED SHOVELS AND PICK AXES.)
NF T30-601-1977 涂料.室内工程涂层.用稠密度计测定浓度 (PAINTS. PAINT COATINGS FOR INDOOR USE. MEASUREMENT OF CONSISTENCY BY PENETROMETER.)
NF C51-1051-1983 C51-105-71的补充1 ()
NF L46-250-1987 航空和航天.流体系统.管路轴线可调节压块.设计标准和合格试验.米制系列 (AEROSPACE. FLUID SYSTEMS. CLAMP BLOCKS FOR TUBE LINES HAVING AXIAL ALIGNMENT. DESIGN STANDARD AND QUALIFICATION TESTING. METRIC SERIES.)
NF P38-403-1983 玻璃纤维增强聚酯半透明波形板.尺寸特性 (TRANSLUCENT GLASS-FIBER REINFORCED POLYESTER CORRUGATED SHEETS. DIMENSIONAL CHARACTERISTICS.)
NF A50-921-1996 铝及铝合金.锻造坯料.第2部分:机械性能 (ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 2 : MECHANICAL PROPERTIES. (EUROPEAN STANDARD EN 603-2).)
NF E22-517-1984 滑动轴承.薄型半边轴瓦.伸长度的检验方法 (PLAIN BEARINGS. THIN-WALLED HALF BEARINGS. METHOD OF PERIPHERAL LENGTH CHECKING.)
NF P98-713-1993 道路建造和维修设备.翻新过程土壤稳定性:冷刨龙门铣床.术语 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. SOILS STABILIZATION OR RETREAD PROCESS : MILLING PLANERS, COLD PLANING. TERMINOLOGY.)
NF R16-336/A1-2000 喷油装置.词汇.第2部分:喷油器 (Fuel injection equipment - Vocabulary - Part 2 : fuel injectors.)
NF M07-071-1-2000 柴油燃料.使用高频往复装置对润滑性的评价.第1部分:试验方法 (Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1 : test method.)
NF C86-251-1987 电子元器件质量评定协调体系.熔接可编程只读存储器.空白详细规范 (Harmonized system of quality assessment for electronic components. Fusible link programmable read only memories. Blank detail specification.)
NF C45-300-1991 电子元器件质量评定协调体系.有或无机电继电器.总规范 (Harmonized system of quality assessment for electronic components. Electromechanical all-or-nothing relays. Generic specification.)
NF S72-509-10-2000 防护头盔.试验方法.第10部分:耐辐射热 (Protective helmets - Test methods - Part 10 : resistance to radiant heat.)
NF T20-531-1984 工业用六氟硅酸钠.试验方法 (Sodium hexafluorosilicate for industrial use. Methods of test.)
NF P78-222-2000 建筑玻璃.化学增强钠钙安全玻璃.第1部分:定义和描述 (Glass in building - Chemically strengthened soda lime silicate glass - Part 1 : definition and description.)
NF C83-113/A1-1981 NF C 83-113-1978的补充件1 ()
NF A89-810-5-2000 热塑半成品焊接接头的试验.第5部分:宏观检验 (Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.)
NF A35-019-1-1996 钢筋混凝土用钢筋.可焊刻痕丝制钢筋.第1部分:钢条和旋管 (Concrete reinforcing steels. Reinforcing steels made of weldable indented wires. Part 1 : bars and coils.)
NF A06-711-1987 铜和铜合金的化学分析.铁含量的测定.分子吸收分光光度法 (Chemical analysis of copper and copper alloys. Determination of iron content. Molecular absorption spectrophotometric method.)
NF U44-181-2000 肥料材料.镁含量的测定.原子吸收光谱法 (Liming materials - Determination of magnesium content - Atomic absorption spectrometric method.)
NF E25-532-2000 平垫圈.超大型系列.产品等级C (Plain washers - Extra large series - Product grade C.)
NF T30-120-1999 涂料和清漆.薄膜厚度的测定 (Paints and varnishes - Determination of film thickness.)
NF C93-584-4-2000 射频同轴电缆组件.第4部分:半硬同轴电缆组件分规范 (Radio frequency and coaxial cable assemblies - Part 3 : selectional specification for semi-flexible coaxial cable assemblies.)
NF C15-100/AM1-1977 NF C 15-100-1976的补充件1 ()
NF C32-201/A2-1977 NF C32-201-1975的补充件2 ()
NF C83-200/A3-1988 NF C 83-200-1981的补充件3 ()
NF T47-259-1996 橡胶软管和软管组件.织物增强的液压型.规范 (Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification.)
NF S97-601-3-2000 医疗设备制造用动物组织及其衍生物.第3部分:病毒和其它传染剂的清除和/或僵化的证实 (Animal tissues et their derivatives utilized in the manufacture of medical devices - Part 3 : validation of the elimination and/or inactivation of viruses and other transmissible agents.)
NF C93-902-24-2000 光纤互连装置和无源部件.基本试验和测量步骤.第2-24部分:通过应力应用对陶瓷排列分裂的屏幕试验 (Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24 : tests - Screen testing of ceramic alignment split sleeve by stress application.)
NF V03-308-1991 生咖啡.粒度分析.手工过筛 (Green coffee. Size analysis. Manual sieving.)
NF E60-136-1-2000 带垂直心轴和固定高度台面的高精度转动架和与心轴相配的钻孔机的试验条件.精度试验.第1部分:单柱机型 (Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle - Testing of the accuracy - Part 1 : single column)
NF X11-710-2000 取样准备.液体中粉末的分散过程 (Sample preparation - Dispersing procedures for powders in liquids.)
NF G07-111-1995 纺织品.纺织品在空气中透磁率的定义 (Textiles. Determination of permeability of fabrics to air.)
NF E04-710-1-1992 带或不带分度的绘图仪器.第1部分:绘图比例尺 (Draughting instruments with or without graduation. Part 1 : draughting scale rulers.)
NF S11-400-1998 眼科光学.柔性焦距透镜组.词汇 (OPHTHALMIC OPTICS. SPECTACLE LENSES. VOCABULARY. (EUROPEAN STANDARD EN ISO 13666).)
NF T60-205-1-1988 动物脂肪和植物脂肪.不皂化物质含量的测定.第1部分:二乙基氧化物提取法(参考法) (ANIMAL AND VEGETABLE FATS AND OILS. DETERMINATION OF UNSAPONIFIABLE MATTER. PART 1 : METHOD USING DIETHYL ETHER EXTRACTION (REFERENCE METHOD).)
NF P34-216-11-1999 DTU 40.46.1994年9月NF P 34-216-1的补充件1 ()
NF X20-361-1976 气体分析.非扩散红外线辐射束吸收法测定一氧化碳 (GAS ANALYSIS. DETERMINATION OF CARBON MONOXIDE BY ABSORPTION OF A NON DISPERSIVE INFRA-RED RADIATION BEAM.)
NF E48-503-1987 液压传动.千斤顶.160bar小型A千斤顶活塞杆端头的球头销定 (HYDRAULIC FLUID POWER. CYLINDER. ROD END SPHERICAL EYE FOR 160 BAR SINGLE-ROD CYLINDER,COMPACT SERIE A.)
NF E29-316-5-2001 供水用阀门.适用性要求和专用检查试验.第5部分:控制阀门 (Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5 : control valves.)
NF X30-301-1998 环境管理.生物圈评价.目标和范围的定义及资源分析 (Environmental management. Life cycle assessment. Goal and scope definition and inventory analysis.)
NF Z82-564-1-2001 电信管理网络(TMN).用于异步传送模式(ATM)交换网络单元的管理与 控制的信息模型及协议.第1部分:Q3接口规范 (Telecommunications Management Network (TMN) - Information models and protocols for the management and control of the Asynchronous Transfer Mode (ATM) switching network element - Part 1 : Q3 interface)
NF C93-537-3-1-2001 通信电缆.试验方法规范.第3-1部分:机械试验方法.一般要求 (Communication cables - Specifications for test methods - Part 3-1 : mechanical test methods - General requirements.)
NF T20-060-1983 化工产品.铁含量测定的一般方法.1,10-菲绕啉分光光度法 (Chemical products for industrial use. General method for determination of iron content. 1,10 phenanthroline spectrometric method.)
NF T54-934-1997 塑料管道系统.管件,阀和附件.气流率/压降关系的测定 (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.)
NF C73-811/A1-2000 家用和类似用途电器的安全.第2-11部分:滚筒干衣机的特殊要求 (Safety of household and similar electrical appliances - Part 2-11 : particular requirements for tumble dryers.)
NF U25-516-2000 林业设备.便携灌木砍伐机和除草机.发动机性能和燃烧油耗 (Forestry machinery - Portable brush-cutters and grass-trimmers - Engine performance and fuel consumption.)
NF C61-111-2000 家用和类似用途的固定电气设备开关.第2部分:特殊要求.第1节:电子开关 (Switches for household and similar fixed-electrical installations - Part 2 : particular requirements - Section 1 : electronic switches.)
NF V09-008-1999 感官分析.食品颜色评价的通用指南和试验方法 (Sensory analysis. General guidance and test method for assessment of the colour of foods.)
NF P99-302-1993 道路信息和利用.字母数字道路数据的传输协议 (Road information and exploitation. Protocol for the transmission of alphanumerical road data.)
NF C83-100/A2-1981 NF C 83-100-1975的补充件2 ()
NF T76-318-2000 皮革和鞋靴材料用胶粘剂.皮革表面白色或鲜艳颜色因迁移产生的颜色改变的测定 (Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration.)
NF P20-503-2000 窗户和门.防风.试验方法 (Windows and doors - Resistance to wind load - Test method.)
NF E48-064-4-2000 液压动力和一般应用的金属管连接.第4部分:由O型环焊接的24芯连接 (Metallic tube connections for fluid power and general use - Part 4 : 24 o cone connectors with O-ring weld-on nipples.)
NF T60-204-1999 动植物脂肪和油.酸值和酸度的测定 (Animal and vegetable fats and oils. Determination of acid value and acidity.)
NF C73-807+ A1-2000 家用和类似用途电器的安全性.第2部分:洗衣机的特殊要求 (Safety of household and similar electrical appliances - Part 2 : particular requirements for washing machines.)
NF E60-140-2000 机床.金属线放电加工机床的试验条件.术语和准确度试验 (Machine tools - Test conditions for wire electrical discharge machines (wire EDM) - Terminology and testing of the accuracy.)
NF G52-303-2000 皮革.印染牢度的试验.小型样品耐干洗溶剂色牢度 (Leather - Tests for colour fastness - Colour fastness of small samples to dry-cleaning solutions.)
NF E11-150-4-2000 几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第4部分:扫描测量法用坐标式测量设备 (Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4 : CMMs used in scanning measuring mode.)
NF X31-402-1995 土壤质量.水溶性和酸溶性硫酸盐测定 (Soil quality. Determination of water-soluble and acid-soluble sulfate.)
NF E11-030-1994 钢制规.直径199mm-300mm的光滑环规.一般型号和尺寸 (Gauges. 1,99 mm to 300 mm diameter plain ring gauges. General shapes and dimensions.)
NF A50-634-1995 铝和铝合金.挤压棒材/管材和型材.第五部分:挤压矩形棒材. 尺寸和形状公差 (Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Part 5 : rectangular bars, tolerances on dimensions and form.)
NF X50-001-2-5-2002 发电站设备采购指南.第2-5部分:电气设备.马达 (Guide for procurement of power station equipment - Part 2-5 : electrical equipment - Motors.)
NF T77-111-1988 工业硅树脂.闪点的测定 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF FLASH POINTS.)
NF P34-216-21-1999 DTU 40.46.1994年9月NF P 34-216-2的补充件1 ()
NF G54-102-1998 制革厂机械.动片机械装置.安全要求 (TANNERY MACHINES. MOVING PLATE MACHINERY. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1035).)
NF C93-5661-1983 C93-566-81的补充1 ()
NF D25-101-14-2003 接触食品的材料和物品.塑料.第14部分:用试验媒体异辛烷和95%酒精对有意接触油脂食品的塑料的总迁移量进行的 (Materials and articles in contact with foodstuffs - Plastics - Part 14 : test methods for substitute tests for overall migration from plastics intended to come into contact with fatty foodstuffs using)
NF A36-402-1996 玻璃搪瓷用冷轧低碳钢平板产品.技术交货条件 (COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR VITREOUS ENAMELLING. TECHNICAL DELIVERY CONDITIONS. (EUROPEAN STANDARD EN 10209).)
NF V05-203-1994 焙烤的咖啡豆.水分的测定.卡尔.费慈法(参考法) (ROASTED GROUND COFFEE. DETERMINATION OF MOISTURE CONTENT. KARL FISCHER METHOD (REFERENCE METHOD).)
NF J32-442-1990 造船.客舱梯子 (SHIPBUILDING. ACCOMMODATION LADDERS.)
NF T43-009-1988 橡胶和合成橡胶.异丁烯一异戊二烯橡胶.试验方法 (RUBBER,ISOBUTENE-ISOPRENE (IIR). EVALUATION PROCEDURES.)
NF L22-309-1977 无头截锥顶凹六角螺钉.ISO螺纹 (HEXAGON SOCKET SET SCREWS,TRUNCATED CONE POINT. ISO THREAD.)
NF V04-051-1988 奶制品和奶基食品.维泊尔-伯尔恩卓重量法测定脂肪含量(参照法).第1部分:幼儿食品 (Milk products and milk-based foods. Determination of fat content by the weibull-berntrop gravimetric method (reference method). Part 1 : infant foods.)
NF T51-083-1999 塑料.液态或象乳胶或分散体一样的树脂.用布洛克菲文德试验方法测定表面粘度 (Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield test method.)
NF X42-105-1998 生物工程.大规模处理和生产.依据生物风险的设备选择和安装指南 (Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk.)
NF T57-219-1999 塑料管道系统. 玻璃增强的热固塑料管(GRP).在潮湿条件下长临界相关环变形的测定(EN 1227) (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions.)
NF T54-917-1-2000 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚乙烯(PE).第1部分:管道,配件和系统规范 (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.)
NF V03-091-1-1999 非油脂食品.二硫代氢基甲酸酯氨荒酸盐和二硫化四烷秋兰姆残余量的测定.第1部分:分光光谱法 (Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Part 1 : spectrometric method.)
NF C73-814/A11-2000 家用和类似电器的安全.第2-14部分:炊事机具的特殊要求 (Safety of household and similar electrical appliances - Part 2-14 : particular requirements for kitchen machines.)
NF E37-102-2-2000 往复式内燃发动机.用在潜在爆炸气体环境下发动机结构和设计的安全要求.第2部分:用在地下工作时对沼气和/或 (Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2 : group I engines for use in underground wo)
NF C73-862-2000 家用和类似用途电器的安全.第2-62部分:商用电洗池的特殊要求 (Safety of household and similar electrical appliances - Part 2-62 : particular requirements for commercial electric rinsing sinks.)
NF A49-875-17-2000 钢管的无损检验.第17部分:层面缺陷探测用无缝和焊接钢管末端超声试验 (Non-destructive testing of steel tubes - Part 17 : ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.)
NF S31-049-12-2000 声学.建筑物内和建筑物单元声音隔绝的测量.第12部分:房间对房间载噪音的实验室测量和通道地板的声音冲击的 (Acoustics - Measurement of sound insulation in buildings and of building elements - Part 12 : laboratory measurement of room-to-room airborne and impact sound insulation of an access floor.)
NF S72-412-2000 军体运动用防护设备.第1部分:通用要求和试验方法 (Protective equipment for martial arts - Part 1 : general requirements and test methods.)
NF T60-141-1993 工业液体润滑剂.ISO粘度分类 (Industrial liquid lubricants. ISO viscosity classification.)
NF C42-544-1-2000 仪表用变压器.第1部分:电流变压器 (Instrument transformers - Part 1 : current transformers.)

[1]

 

< 返回 >

合作企业及完成项目

联系我们

上海浦传翻译有限公司

 

国内公司联系方式
地址:上海市浦东新区川沙城南路747弄19号
邮编:201107
免费电话:400-080-6011
移动电话:86-151-0218-8443
Email:service#at#pure-trans.com
QQ:1649926125
网址:www.pure-trans.com

 

韩国办事处联系方式

韩国首尔市广津区紫阳4洞16-25号
电话:0082-2-461-3255
手机:0082-10-5872-7780
QQ:1437215665

 


联系地址:上海市浦东新区川沙城南路747弄19号 邮编:201107 电话: 400-080-6011 传真:
COPYRIGHT @ 上海浦传翻译有限公司版权所有。 ALL Right Reserved 沪ICP备11021976号