公司概况  >>更多
公司简介
公司动态
公司证书
翻译服务 >>更多
笔译
口译
同声传译
本地化国际化
语言整体解决方案
翻译价格 >>更多
翻译价格
行业解决方案
化工翻译
浦传翻译优势
旅游行业
汽车行业
业务团队 >>更多
业务团队
 
资源共享  

所在位置:首页 > 资源共享 > 法国NF标准14


法国NF标准14

点击次数:33398次

NF E04-505-4-2000 技术产品文献.字体.第4部分:拉丁字母的区别标记与特殊标记 (Technical product documentation - Lettering - Part 4 : diacritical and particular marks for the Latin alphabet.)
NF Q13-002-1977 纸和纸板.电解电容器纸的特性 (PAPER AND BOARD. CHARACTERISTICS OF ELECTROLYTIC CAPACITOR PAPERS.)
NF C83-1202-1988 C 83-120-83的补充2 ()
NF Q64-019-1981 印刷工艺.印刷和印刷油墨.印刷品在糖溶液中褪色性测定 (GRAPHIC TECHNOLOGY. PRINTING AND PRINTING INKS. DETERMINATION OF THE LIKELIHOOD OF COLOUR MIGRATION FROM A PRINT INTO A SUGAR SOLUTION.)
NF Q03-046M-1973 纸张和纸板试验.纸张纸板.与纸板面垂直抗开裂强度的测定.破裂测试仪方法 (PAPERS AND CARDBOARDS. DETERMINATION OF RESISTANCE TO CLEAVAGE PERPENDICULARLY TO THE PLANE OF SHEET. “BURSTOMETER“ METHOD.)
NF T31-122-1998 涂料用填充剂.规格和试验方法.第1部分:介绍和一般试验方法 (EXTENDERS FOR PAINTS. SPECIFICATIONS AND METHODS OF TEST. PART 1 : INTRODUCTION AND GENERAL TEST METHODS. (EUROPEAN STANDARD EN ISO 3262-1).)
NF C32-120-1985 额定电压不超过450/ 750V的橡胶导线和绝缘电缆.国家级型号系列 (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. SERIES OF THE NATIONAL TYPE OF CATEGORY 1.)
NF E86-800-1983 锅炉设备.研磨喷诜.管理等级定义 (TANKS-BLASTING. DEFINITION OF GRADE OF RUST REMOVAL.)
NF P28-001-1990 轻型面墙.定义.分类.术语 (HIGHTWEIGHT FACADES. DEFINITONS. CLASSIFICATION. TERMINOLOGY.)
NF P75-401-1-2001 DTU 45.1.建筑工程.冷动用建筑物和可调温房屋的热绝缘.第1部分:技术条款的合同项 (DTU 45.1 - Building works - Thermal insulation of refrigerating buildings and of regulated temperature premises - Part 1 : contract bill of technical clauses.)
NF L17-916-1995 航空航天系列.降落伞纤维.扭编绳的试验.锥形细纱球的数目的测定 (AEROSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF THE NUMBER OF YARN COPS.)
NF F52-539-1990 铁路固定设备.经热处理的轨道.特性与试验 (RAILWAY FIXED EQUIPMENT. HEAT TREATED RAILS. CHARACTERISTICS AND TESTS.)
NF C73-24751-1994 1991年NF C 73-247的补充件51 ()
NF D27-304-1940 家政学.编织用针 (DOMESTIC ECONOMY. KNITTING NEEDLES.)
NF C72-2125-1994 电源高压放电汞灯.第5次修改 ()
NF D10-301-1959 卫生设备.标定容量为10升的水箱 (SANITARY APPLIANCES. SPECIFICATION FOR HIGH FLUSHING WC CISTERNS WITH NOMINAL CAPACITY OF 10 LITRES.)
NF C32-2202-1993 设备用绝缘电缆和导线.额定电压不超过450/ 750V的聚氯乙烯绝缘导线和电缆.国家1类型号系列.第2次修 ()
NF R13-50711-1995 NF R13-507-93补充件11 ()
NF P98-744-2-1996 道路建设及维修设备.物质生产单位的连续配制设备的现场装置的校正及检验.第2部分:总重量计量机 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. ON-SITE CALIBRATION AND VERIFICATION OF THE SETTINGS OF THE CONTINUOUS DOSING APPARATUS OF MATERIAL PRODUCTION PLANTS. PART 2 : AGGREGATE WEIGHING DOSING MACHINE.)
NF E48-658-1990 液压传动.流体.利用光干扰自动计数法对粉末污染的测定 (HYDRAULIC FLUID POWER. FLUIDS. DETERMINATION OF PARTICULATE CONTAMINATION BY AUTOMATIC COUNTING USING THE LIGHT INTERRUPTION PRINCIPLE.)
NF D14-505-1987 卫生设备.搪瓷表面的外观检查.试验方法 (SANITARY APPLIANCES. ASPECT CHECKING OF ENAMELLED SURFACES. TEST METHOD.)
NF E25-850-1985 紧固件.直角弯钩 (FASTENERS. SQUARE BEND HOOKS.)
NF B35-008-1974 实验室用玻璃器皿.锥形瓶和带有磨光接头的有颈锥形瓶 (LABORATORY GLASSWARE. CONICAL FLASKS. CONICAL FLASKS WITH CONICAL GROUND GLASS JOINT.)
NF S54-007-1987 儿童保育用品.儿童用高椅.安全要求和试验 (CHILD CARE ARTICLES. CHILDREN HIGH CHAIRS. SAFETY REQUIREMENTS AND TESTS.)
NF A81-324-1981 实心金属裸双焊条.有不锈钢和/或耐热钢析出的电弧焊用粉末焊剂.符号.规范.试验 (COMBINATIONS OF BARE SOLID-METAL ELECTRODE WIRES AND POWER FLUXES FOR ELECTRIC ARC WELDING,DEPOSITING A STAINLESS AND/OR REFRACTORY STEEL. SYMBOLIZATION. REQUIREMENTS. TEST.)
NF D35-305-2000 烟囱.金属烟囱.实验方法 (Chimneys - Metal chimneys - Test methods.)
NF C83-310-1982 电子元件.CENELEC质量保证体系.通讯用电感器和变压器铁芯.一般规范 (ELECTRONIC COMPONENTS. HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. INDUCTOR AND TRANSFORMER CORES FOR TELECOMMUNICATIONS. GENERIC SPECIFICATION. (SPECIFICATION CECC 25 000).)
NF L17-780-1992 航空航天系列.自行设备.底板绞线的等拉伸力测量 (AEROSPACE SERIES. ROWINGS. MEASUREMENT OF THE EQUITENSION OF THE BASE STRANDS.)
NF L22-183-1976 有BNAE十字槽90°埋头螺钉.国际单位米制螺纹 (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF C64-4551-1994 1993年NF C 64-455的补充件1 ()
NF U61-050-2000 食品加工设备.行星搅拌机.安全和卫生要求 (Food processing machinery - Planetary mixers - Safety and hygiene requirements.)
NF B53-601-3-1995 圆木和锯木.术语.第3部分:有关锯材的一般术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 3 : GENERAL TERMS RELATING TO SAWN TIMBER. (EUROPEAN STANDARD EN 844-3).)
NF S71-513-1996 防止从高处跌落的个人防护设备.锚具装置.要求和试验 (PROTECTION AGAINST FALLS FROM A HEIGHT. ANCHOR DEVICES. REQUIREMENTS AND TESTING. (EUROPEAN STANDARD EN 795).)
NF P98-711-1993 道路建造和维修设备.土壤稳定或翻新:土壤处理机械及粘合剂的储存.术语 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. SOILS STABILIZATION OR RETREAD : SOILS PROCESSING MACHINERY, STORAGE OF BINDING MATERIALS. TERMINOLOGY.)
NF C63-16111-1997 1993年NF C 63-161的补充件11 ()
NF C83-312-1982 电子元件.CENELEC质量保证体系.线性变压器用铁氧体磁芯.过渡规范 (HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. SECTIONAL SPECIFICATION. MAGNETIC OXIDE CORES FOR LINEAR TRANSFORMERS. (SPECIFICATION CECC 25 200).)
NF C61-120-2002 电器开关.第1部分:一般要求 (Switches for appliances - Part 1 : general requirements.)
NF C26-176-2002 电气设备用非浸渍致密层压板规范.第2部分:试验方法 (Specifications for non-impregnated, densified laminated wood for electrical purposes - Part 2 : methods of test.)
NF Q15-008-1976 纸和纸板.胶粘纸和胶粘牛皮纸用原纸的特性 (PAPER AND BOARD. CHARACTERISTICS OF BODY PAPER FOR GUMMED PAPER AND ADHESIVE KRAFTPAPER.)
NF T73-236-1988 表面活性剂.工业用烷基磺酸盐.烷基单磺酸盐成分的测定.双相直接滴定法 (SURFACE ACTIVE AGENTS. TECHNICAL ALKANE SULFONATES. DETERMINATION OF ALKANE MONOSULFONATES CONTENT BY DIRECT TWO-PHASE TITRATION.)
NF A49-713-1993 钢管.带有环氧树脂及聚酰胺基涂层的外部和/或内部双层覆层 (STEEL TUBES. EXTERNAL AND/OR INTERNAL TWO LAYERS COATING WITH EPOXY RESIN AND POLYAMIDE BASED COATING.)
NF E36-102-1977 供水式对流通风机.规范 (AIR CONDITIONING. CONVECTOR FANS. SPECIFICATION.)
NF S95-1111-1998 1997年 NF S 95-111的补充件1 ()
NF P20-513-2000 门扇.在连续不变气候条件下门扇抗湿度变化的性能的测定 (Door leaves - Determination of the behaviour under humidity variations in successive uniform climates.)
NF D61-040-3-2000 办公家具.办公椅.第3部分:安全试验方法 (Office furniture - Office work chair - Part 3 : safety test methods.)
NF T35-010-2000 释放易燃物质的烘箱.安全要求 (Dryers and ovens, in which flammable substances are released - Safety requirements.)
NF A36-160-2003 冷成型用电解镀锌扁平冷轧材.技术交货条件 (Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions.)
NF A89-420-2000 钎焊.钎焊接点的无损试验 (Brazing - Destructive tests of brazed joints.)
NF J95-030-1995 小船.负载下起动前的保护 (SMALL CRAFT. STAR-IN-GEAR PROTECTION. (EUROPEAN STANDARD EN ISO 11547).)
NF B53-601-6-1997 圆木和锯材.术语.第6部分:有关锯材尺寸的术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 6 : TERMS RELATING TO DIMENSIONS OF SAWN TIMBER. (EUROPEAN STANDARD EN 844-6).)
NF P75-304-1987 建筑物绝热材料.由刚性和半刚性绝热材料毛细作用产生的吸水性的测定.水排斥性 (MANUFACTURED THERMAL INSULATING MATERIALS FOR BUILDING PURPOSES. DETERMINATION OF WATER ABSORPTION BY CAPILLARITY OF THE RIGID AND SEMI-RIGID INSULATING MATERIALS. WATER REPELLENCY.)
NF C31-681-2000 特种绕组线规范.第31部分:玻璃纤维绕制树脂或清漆浸渍的裸的或漆包扁铜绕组线.温度指数180 (Specifications for particular types of winding wires - Part 31 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.)
NF C47-7362-1998 1995年NF C 47-734的补充件2 ()
NF T56-1221-1997 NF T56-122-1984的补充件1 ()
NF P84-304-1971 密封性.糊状产品 (WATERPROOFING. WATERPROOFING MATERIALS.)
NF S90-530-1973 外科医疗器械.矫形和假肢组件.HOFFA销钉带单臀部连接件 (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. HIP JOINT WITH HOFFA BOLT.)
NF S30-102-1973 声学词汇.声音的发射、传播和振动系统? (ACOUSTICS. TERMINOLOGY. TRANSMISSION SYSTEMS AND TRANSDUCERS FOR SOUND AND VIBRATIONS.)
NF L86-510-1954 活塞发动机起动机.发动机端的固定和驱动 (STARTERS FOR PISTON ENGINES IN AIRCRAFT. FIXING AND DRIVE ON ENGINE SIDE.)
NF C93-521-1972 电子元件.电子设备内部电缆用聚氯乙烯绝缘线和电缆.一般规定 (ELECTRONIC COMPONENTS. LOW FREQUENCY EQUIPMENT WIRES AND CABLES WITH SOLID OR STRANDED CONDUCTORS,PVC INSULATION AND SHEATH. GENERAL REQUIREMENTS.)
NF P98-707-1992 筑路养路设备.沥青粘结剂喷撒器.沥青粘结剂喷洒器术语和名称 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. BITUMINOUS BINDER SPREADER/SPRAYER. TERMINOLOGY AND NOMENCLATURE OF BITUMINOUS BINDER SPREADER/SPAYERS.)
NF C63-018-1980 低压工业设备.支架型材.连接件固定用G形型材 (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. MOUNTING RAILS. G PROFILE FOR THE FIXING OF TERMINAL BLOCKS. (EUROPEAN STANDARD EN 50 035).)
NF V76-105-1980 水果和蔬菜汁.除二氧化硫以外的杀菌效率的研究方法 (FRUIT AND VEGETABLE JUICES. METHOD OF RESEARCHING PRESENCE OF ANTISEPTIC ACTIVITY OTHER THAN THAT OF SULPHUR DIOXIDE.)
NF S94-350-2000 非活性外科植入物.身体塑型植入物.乳房植入物的特殊要求 (Non-active surgical implants - Body contouring implants - Specific requirements for mammary implants.)
NF C77-2101-1993 1993年NF C 77-210的补充件1 ()
NF T20-435-1980 工业氢氧化钠.汞含量的测定.无火焰原子吸收分光光度法 (SODIUM HYDROXIDE FOR INDUSTRIAL USE. DETERMINATION OF MERCURY CONTENT. FLAMELESS ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF F19-303-1996 铁路车辆.铝和铝合金用含水涂料单分子薄膜 (RAILWAY ROLLING STOCK. PAINT MONOCOAT WATERBORNE WITH WATER USED TO ALUMINIUM AND ALUMINIUM`S ALLOIES.)
NF A50-261-1977 铝和铝合金.薄带钢和金属薄片.物理试验、铝带多孔性、可湿性、厚度.铝带附着力 (ALUMINIUM AND ALUMINIUM ALLOYS. FOILS. PHYSICAL TESTS.)
NF T20-527-1980 工业硅酸钠硅酸钾.硫酸 (SODIUM AND POTASSIUM SILICATES FOR INDUSTRIAL USE. DETERMINATION OF SULPHATES CONTENT. BARIUM SULPHATE GRAVIMETRIC METHOD.)
NF Z85-324-1-2000 数字局部交换V接口.支持网络通路的V5.1接口.第1部分:接口规范 (V interfaces at the digital Local Exchange (LE) - V5.1 interface for the support of Access Network (AN) - Part 1 : V5.1 interface specification.)
NF L22-577-2000 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室 (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M)
NF E74-355-1993 十字槽头螺钉用旋转具.第1部分:旋具尖? (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)
NF P98-721-1992 道路建造和维修设备.连续批量处理机.集料设备.流量比率测定的方法和试验台 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. CONTINUOUS BATCHING. EQUIPMENT FOR AGGREGATES. TEST BENCH AND METHOD FOR FLOW RATE MEASUREMENT.)
NF Q03-071-1983 纸张和纸板试验.纸板压缩试验.压缩机静态校正 (PAPER AND BOARD TESTS. BOARD CRUSHING TEST. STATIC CALIBRATION OF THE CRUSHING MACHINE.)
NF C79-133-2001 机械安全.机器的电气设备.第11部分:电压超过1000V.a.c.或1500V.d.c和36KV以下的HV设备的要求 (Safety of machinery - Electrical equipment of machines - Part 11 : requirements for HV equipement for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV.)
NF T47-507-1994 橡胶O型环.O型环的包装,识别和储存 (RUBBER O-RINGS. PACKAGING, IDENTIFICATION AND STORAGE OF RUBBER O-RINGS.)
NF V03-904-2002 油料种子.杂质含量的测定 (Oilseeds - Determination of content of impurities.)
NF P18-010-1985 混凝土.水硬性混凝土的名称和分类 (CONCRETE. CLASSIFICATION AND DESIGNATION OF HYDRAULIC CONCRETE.)
NF P20-518-1984 门的试验方法.门扇硬度重复扭曲试验 (METHODS OF TESTING DOORS. TEST FOR THE CHANGE IN STIFFNESS OF THE DOOR LEAVES BY REPEATED TORSION. (EUROPEAN STANDARD EN 130).)
NF H00-070-1983 液体运输包装.危险品运输用组合包装内部容器、混合包装金属或塑料桶.空气密封试验.操作方式 (PACKAGING. PACKAGING FOR TRANSPORTING LIQUIDS. METAL OR PLASTIC DRUMS AND JERRYCANS,COMPOSITE PACKAGING,INTERIOR CONTAINERS OF COMBINED PACKAGING FOR THE TRANSPORT OF DANGEROUS MATERIALS. AIRTIGHTNESS TEST. PROCEDURE.)
NF B53-614-1997 圆木和锯材.生物降解的测量方法 (ROUND AND SAWN TIMBER. METHOD OF MEASUREMENT OF BIOLOGICAL DEGRADE. (EUROPEAN STANDARD EN 1311).)
NF Q03-047-1971 纸张和纸板试验.纸张和纸板灰分含量测定方法 (PAPER AND BOARD TESTS. METHOD TO DETERMINE THE ASH CONTENT OF PAPER AND BOARD.)
NF X31-509-1993 土壤质量.土壤地理用途的土地滴注方法? (SOIL QUALITY. METHOD FOR INSTALLING A PIEZOMETER IN THE GROUND FOR AGROPEDOLOGICAL PURPOSES.)
NF E66-210-1977 7/24锥形柄开槽铣刀.短系列和标准系列 (SLOT DRILLS WITH 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.)
NF S75-508-2-2000 防护服.避免用手刀砍伤或戳伤用的手套和臂膀防护物品.第2部分:不包括链状铠甲的材料制手套和臂膀防护物品 (Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2 : gloves and arm guards made of material other than chain mail.)
NF P97-408-1982 公共灯柱.钢筋混凝土和预应力混凝土公共灯柱的特殊规定 (LIGHTING COLUMNS. SPECIAL REQUIREMENTS FOR REINFORCED AND PRESTRESSED CONCRETE LIGHTING COLUMNS. (EUROPEAN STANDARD EN 40-9).)
NF E11-150-3-2000 几何产品规范(GPS).坐标式测量设备(CMM)的验收和再鉴定试验.第3部分:以旋转台的轴线作为第四条轴线的坐标式 (Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3 : CMMs with the axis of a rotary table as the fourth axis.)
NF P75-306-1987 建筑物绝热材料.刚性绝热材料24小时透水性能的常规测定 (MANUFACTURED THERMAL INSULATING MATERIALS FOR BUILDING PURPOSES. CONVENTIONAL DETERMINATION OF THE WATER PERMEABILITY NATURE OF THE RIGID INSULATING MATERIALS AFTER 24 HOURS.)
NF S90-522-1973 外科医疗器械.矫形和假体组件.不可拆卸的单踝骨连接 (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. FIXED ANKLE JOINT.)
NF T01-036-1980 分子吸收分光光度法.对仪器的评定方法? (MOLECULAR ABSORPTION SPECTROPHOTOMETRY. METHODS OF INSPECTION OF APPARATUS.)
NF L40-103-1974 轴向密封接头.ISO米制螺纹剖面的凸端和BNAE公差 (CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES.)
NF G07-161-1990 纺织.织物试验.横向表面电阻的测定 (TEXTILES. TESTING OF FABRICS. DETERMINATION OF THE TRANSVERSAL SUPERFICIAL ELECTRIC RESISTANCE.)
NF S72-509-2-2000 防护头盔.试验方法.第2部分:缓冲作用 (Protective helmets - Test methods - Part 2 : shock absorption.)
NF M60-702-1988 表面污染的评定.第2部分:氚表面污染 (EVALUATION OF SURFACE CONTAMINATION. PART 2 : TRITIUM SURFACE CONTAMINATION.)
NF F07-021-1992 铁路固定设备和车辆.电磁干扰.辐射场的测量 (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. MEASURMENT OF RADIANT FIELD.)
NF G90-058-1977 家用缝纫机.方向稳定性试验方法 (HOUSEHOLD SEWING MACHINES. METHOD OF TEST ON DIRECTIONAL STABILITY.)
NF C63-0011-1998 1998年NF C 63-001的补充件1 ()
NF B35-033-1964 实验室用玻璃器皿.标准锥形磨光连接管? (LABORATORY GLASSWARE. STANDARD CONICAL TUBING CONNECTORS.)
NF F55-027-1975 铁路固定设备.切线分叉箱.总成、壳和盖 (FIXED RAILWAY INSTALLATIONS. TEE JOINTS. ASSEMBLIES,BOXES AND COVERS.)
NF L70-515-1972 座标分析器 (RESOLVERS, ELECTRICAL.)
NF C52-161/A1-2000 变压器和电抗器的声级测定 (Determination of transformer and reactor sound levels.)
NF P67-103-2-1993 DTU 57-1. 高架地板(自由出入).组成部件.第2部分:特别条款用规范 (DTU 57-1. RAISED ACCESS FLOOR (FREE ACCESS). CONSTITUANT COMPONENTS. EXECUTION. PART 2 : SPECIFICATION FOR SPECIAL CLAUSES.)
NF P68-203-1-1993 DTU 58-1. 施工.吊顶.第1部分:技术条款说明书 (DTU 58-1. EXECUTION OF WORK. SUSPENDED CEILINGS. PART 1 : TECHNICAL CLAUSES BOOK.)
NF P61-302-1970 贴磁砖.大理石镶嵌方砖 (TILING. MARBLE MOSAIC TILES.)
NF F58-003-1991 道路工程设备.在铁道上使用的属于企业的“路轨“器材的工作条件 (RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. APPROVAL OF CONTRACTOR “ROAD-RAIL“ PLANT FOR USE UIC GAUGE TRACK.)
NF C03-2512-1997 1993年NF C 03-251的补充件2 ()
NF Q12-009-1993 纸和纸板.瓦楞纤维板.包装用三重内壁纤维瓦楞板 (PAPER AND BOARD. CORRUGATED FIBER BOARD. CHARACTERISTICS OF TRIPLE WALL CORRUGATED FIBER BOARD FOR PACKAGING.)
NF C64-4502-1993 1987年NF C 64-450的补充件2 ()
NF V37-018-2001 烟草.原材料的批量取样.一般原则 (Tobacco - Sampling of batches of raw material - General principles.)
NF S54-006-1988 儿童保育用品.儿童用托架.安全要求和试验 (CHILD CARE ARTICLES. BABY CARRIER. REQUIREMENTS AND TESTS.)
NF Z85-462-5-1-2000 传输和多路转换(TM).同步网的一般要求.第5-1部分:适用于同步数字层(SGH)设备操作的附属钟的计时特性 (Transmission and Multiplexing (TM) - Generic requirements for synchronization networks - Part 5-1 : timing characteristics of slave clocks suitable for operation in Synchronous Digital Hierarchy (SDH))
NF S73-5011-1997 1993年NF S 73-501的补充件1 ()
NF J37-825-3-2002 充气船.第3部分:最大电动机功率为15KW以上的船 (Inflatable boats - Part 3 : boats with a maximum power rating of 15 kW and greater.)
NF T20-809-1982 工业用轻烯烃.乙烯.碳氢杂质含量的测定.气相色层分离法 (ETHYLENE FOR INDUSTRIAL USE. DETERMINATION OF HYDROCARBON IMPURITIES. GAS CHROMATOGRAPHIC METHOD.)
NF X44-012-2003 一般通风用颗粒空气滤清器.过滤性能的测定 (Particulate air filters for general ventilation - Determination of the filtration performance.)
NF C32-102-13/A1-2000 额定电压达到和包括450/750V的橡胶绝缘电缆.第13部分:用交叉链接聚合物屏蔽和绝缘的及有低烟雾和腐蚀性气体 (Rubber insulated cables of rated voltages up to and including 450/750 V - Part 13 : single and multicore flexible cables, isulated and sheathed with crosslinked polymer and having low emission of smok)
NF P98-725-1994 道路施工和维护设备.传送带流速计.第1部分:试验台和方法 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. CONVEYOR BELT QUANTITY FLOWMETER. TEST BENCH AND METHOD.)
NF H44-029-1986 烟雾剂发生器.气雾剂阀.13mm皮碗 (AEROSOLS DISPENSERS. VALVES. FERRULE 13 MM.)
NF P75-302-1987 建筑物绝热材料.由刚性和半刚性绝热材料重量产生的吸水性的测定.水排斥性 (MANUFACTURED THERMAL INSULATING MATERIALS FOR BUILDING PURPOSES. DETERMINATION OF WATER ABSORPTION BY GRAVITY OF THE RIGID AND SEMI-RIGID INSULATING MATERIALS. WATER REPELLENCY.)
NF D18-001-1965 卫生阀门.卫生设备用普通阀门.词汇 (SANITARY TAPS. SINGLE TAP FOR SANITARY APPLIANCES. TERMINOLOGY.)
NF L40-104-1973 轴向密封接头.ISO米制螺纹剖面的凸端和ISO米制螺纹公差 (CONNECTORS,AXIAL SEALING. MALE THREAD FITTINGS,ISO METRIC THREAD PROFILE AND TOLERANCES.)
NF B56-015-1980 纤维板.垂直于板面的压力试验 (WOOD WOOL SLABS. MEASUREMENT OF TRANSVERSE COMPRESSION.)
NF P75-223-1999 建筑业用隔热材料.夹层地板隔热材料厚度的测定 (THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF THICKNESS FOR FLOATING FLOOR INSULATING PRODUCTS. (EUROPEAN STANDARD EN 12431).)
NF F00-103-1987 铁路车辆.概论.有关铁路经济的量、单位和符号.定义和起草规则 (ROLLING STOCK. GENERALITIES. QUANTITIES,UNITS AND SYMBOLS RELATING TO THE RAILWAY ECONOMICS. DEFINITIONS AND DRAFTING RULES.)
NF F38-002M-1976 铁路运输设备.采用最大压力为2.5bar的散装粉状产品运输用气动排空车.排空粉导管用统一接头 ()
NF C72-1054-1992 NF C72-105-88的补充件 ()
NF V03-311-1987 生咖啡豆.水分测定(旋转法) (GREEN COFFEE. DETERMINATION OF MOISTURE CONTENT (ROUTINE METHOD).)
NF F58-010-1992 铁路建造和保养设备.道碴稳定器.规范 (RAIWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. BALLAST REGULATOR. SPECIFICATIONS.)
NF G07-163-1990 纺织.织物试验.角距的测量 (TEXTILES. TEST FOR FABRICS. MEASUREMENT OF ANGULAR SPACING.)
NF E27-152-1952 半沉头铆钉 (RAISED MUSHROOM HEAD RIVETS.)
NF E48-505-1988 液压传动.160巴小型系列液压缸.B型V形撑架 (HYDRAULIC FLUID POWER. CYLINDER 160 BAR COMPACT SERIE. CLEVIS BRACKET FORM B.)
NF F01-101-1991 铁路车辆.铁路车辆.按法国NF 01-501标准的设计样板制作的铁路车辆举升装置 (RAILWAY ROLLING STOCK. LIFTING OF RAILWAY VEHICLES FITTING THE CONSTRUCTION GAUGE SPECIFED IN FRENCH STANDARD NF F 01-501.)
NF B53-601-8-1997 圆木和锯材.术语.第8部分:有关圆木特性的术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 8 : TERMS RELATING TO FEATURES OF ROUND TIMBER. (EUROPEAN STANDARD EN 844-8).)
NF S52-715-1988 高山滑雪.在冲击下的侧面下滑成人用高山滑雪板.要求和试验方法 (ALPINE SKIS. SKI BINDINGS FOR ADULTS. LATERAL TOE RELEASE UNDER IMPACT LOADING. SAFETY REQUIREMENT AND TEST METHOD.)
NF X10-102-2-2003 用插入圆截面管道中的压差装置测量流体流量.第2部分:节流孔板 (Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2 : orifice plates.)
NF F11-050-1985 铁路车辆. 带O形密封圈的塞子 (RAILWAY TRACTION AND ROLLING STOCK-PLUGS WITH O-RING SEAL.)
NF T77-110-1986 工业硅树脂.乳剂.稀释后稳定性的测定 (BASIC SILICONES FOR INDUSTRIAL USE. EMULSIONS. DETERMINATION OF STABILITY AFTER DILUTION.)
NF F31-051-1979 铁路车辆.长途客车. 台阶 (RAILWAY TRANSPORT EQUIPMENT. MAIN-LINE PASSENGER ROLLING STOCK. COACH STEPS.)
NF S62-223/A1-2001 固定灭火系统.喷头和喷水系统用元部件.第3部分:报警干阀组件 (Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3 : dry alarm valve assemblies.)
NF M51-008-2000 液化天然气装置和设备.LNG取样系统合适性试验 (Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems.)
NF C93-471-1-2000 电子设备的机械结构.IEC 60917和IEC 60297的试验.第1部分:壳体、支架、辅助支架和底盘的气候、机械和安全性 (Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1 : climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis.)
NF G07-178-2-1999 织物.Martinadale法对纤维磨损抗性的测定.第2部分:破损样品的测定 (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 2 : DETERMINATION OF SPECIMEN BREAKDOWN. (EUROPEAN STANDARD EN ISO 12947-2).)
NF P98-744-3-1996 道路建设及维修设备.物质生产单位的连续配制设备的现场装置的校正及检验.第3部分:体积计量机 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. ON-SITE CALIBRATION AND VERIFICATION OF THE SETTINGS OF THE CONTINUOUS DOSING APPARATUS OF MATERIAL PRODUCTION PLANTS. PART 3 : AGGREGATE VOLUMETRIQUE DOSING MACHINE.)
NF Z67-123-1991 信息处理.应用程序组的观测法 (INFORMATION TECHNOLOGY. COMPLIANCE APPROACH FOR AN APPLICATION PACKAGE.)
NF L23-310-1977 航空飞行器紧固件.开口销 (AIRCRAFT FASTENERS. SPLIT PINS.)
NF C63-003-2000 低压开关设备和控制设备.第5-6部分:控制电路装置和开关元件、 近接传感器和开关放大器用直流接口(NAMUR) (Low-voltage switchgear and controlgear - Part 5-6 : control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR).)
NF A06-392-1-2000 黑色金属材料的化学分析.钢和铁中氧的测定.第1部分:取样和制备钢样品用于测定氧 (Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1 : sampling and preparation of steel samples for oxygen determination.)
NF Q11-002-1976 纸和纸板.蜡纸模板复印机用纸特性 (PAPER AND BOARD. CHARACTERISTICS OF STENCIL DUPLICATOR COPY PAPER.)
NF V03-312-1987 生咖啡豆.昆虫损坏豆比例的测定 (GREEN COFFEE. DETERMINATION OF PROPORTION OF INSECT-DAMAGED BEANS.)
NF T20-225-1980 主要用于铝生产的氧化铝.火焰原子吸收分光光度法 (ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION FO ALUMINIUM. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION METHOD.)
NF P98-104-1991 路面层.火山灰的活性试验 (ROAD FOUNDATIONS. TESTING OF REACTIVITY OF POZZOLANA TO LIME.)
NF T31-114-2000 涂料用补充剂.规范和试验方法.第17部分:沉淀硅酸钙 (Extenders for paints - Specifications and methods of test - Part 17 : precipated calcium silicate.)
NF P18-807-1989 水硬性混凝土建筑用的特殊产品.合成树脂或水凝基制品.+450℃时烧失和+950℃灰份含量 (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN OR HYDRAULIC BINDER BASED PRODUCTS. FIRE LOSS AT + 450 DEGREES CELSIUS AND ASH CONTENT AT + 950 DEGREES CELSIUS.)
NF T20-477-1982 工业磷酸.铅含量的测定.原子吸收分光光度法 (PHOSPHORIC ACID FOR INDUSTRIAL USE. DETERMINATION OF LEAD CONTENT. ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF Q26-001-1977 纸和纸板.有涂层的印刷纸特性 (PAPER AND BOARD. CHARACTERISTICS OF COATED PRINTING PAPERS.)
NF X31-130-1993 土壤质量.化学方法.阳离子交换容量和可交换的阳离子的测定 (SOIL QUALITY. CHEMICAL METHODS. DETERMINATION OF CATIONIC EXCHANGE CAPACITY (CEC) AND EXTRACTIBLE CATIONS.)
NF C97-357-1-2000 音响系统设备.与便携音响设备相应的耳机和头戴式耳机.最大声压级测量方法和限制考虑.第1部分:“单一包装设 (Sound system equipment - Headphones and earphones associated with portable audio equipment - Maximum sound pressure level measurement methodology and limit considerations - Part 1 : general method for)
NF F11-402-1983 铁路车辆. 可拆卸支架的制动块.磷铸件250和320制动块 (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF PHOSPHOROUS CAST IRON.)
NF X50-801-2000 运输服务.应用EN ISO 9002对道路运输,储藏和配送工业的指导条款 (Transportation services - Guidance notes on the application of EN ISO 9002 to the road transportation, storage and distribution industries.)
NF A89-232-1994 铝和可焊合金的弧焊接头.质量缺陷等级导则 (ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).)
NF H34-050-2-2000 包装.柔性圆柱形金属管.尺寸和公差 (Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances.)
NF L74-170-1977 380-580H2变频器 (CURRENT TRANSFORMERS,380 HERTZ - 580 HERTZ.)
NF T46-034-1978 硫化橡胶.透气性的测定.恒压法 (RUBBER VULCANIZED. DETERMINATION OF PERMEABILITY CONSTANT PRESSURE METHOD TO GASES.)
NF V04-050-2000 幼儿的奶制品.脂肪含量测定.重量法(参照法) (Milk-based infant foods - Determination of fat content - Gravimetric method (Reference method).)
NF E66-208-1977 圆柱柄锥形阴模铣刀 (TAPERED DIE-SINKING CUTTERS WITH PARALLEL SHANKS.)
NF L17-917-1995 航空航天系列.降落伞纤维.扭编绳的试验.网织品的检测 (AREOSPACE SERIES. PARACHUTE FABRIC. TESTING OF BRAIDED ROPE. DETERMINATION OF MESHWORK.)
NF S73-5021-1997 1993年NF S 73-502的补充件1 ()
NF Q03-027-1968 腊纸和腊纸板三氯乙烯提取物含量测定 (PAPER AND BOARD TESTS. DETERMINATION OF THE CONTENT OF MATERIALS EXTRACTABLE FROM WAXED PAPER OR BOARD BY MEANS OF TRICHLOROETHYLENE.)
NF A58-004-2000 铅及铅合金.铅氧化物 (Lead and lead alloys - Lead oxides.)
NF T76-301-1983 粘合剂.水胶的特性方法一览表 (WATER ADHESIVES. LISTS OF CHARACTERIZATION METHODS.)
NF E26-012-1981 链焊接长环校准和未校准负载链 (WELDED LONG-LINK CALIBRATED OR NON-CALIBRATED LOADING CHAINS.)
NF C93-463-1982 电子元件.连接件.接线柱.一般规定 (COMPONENTS FOR ELECTRONIC EQUIPMENT. CONNECTING BARS. GENERAL REQUIREMENTS.)
NF T20-806-1980 工业用轻烯烃.气相色层分离法对杂质含量的测定(一般评述) (LIGHT OLEFINS FOR INDUSTRIAL USE. DETERMINATION OF IMPURITIES BY GAS CHROMATOGRAPHY. GENERAL CONSIDERATIONS.)
NF T54-120-1976 塑料.薄膜.热焊接试验常规方法(热棒法) (PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.))
NF G07-175-1997 纺织品.纺织纤维作易燃性试验前的家用洗涤方法 (TEXTILES. DOMESTIC LAUNDERING PROCEDURES FOR TEXTILE FABRICS PRIOR TO FLAMMABILITY TESTING. (EUROPEAN STANDARD EN ISO 12138).)
NF A09-214-1985 无损检验.工业放射学.能级从30KEV至150KEV的含有荧光屏和射线照像纸的图象接收系统感光度和反差平均值的测 (NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. DETERMINATION OF THE SENSITIVITY AND AVERAGE CONTRAST OF IMAGE RECEIVER SYSTEMS CONSISTING OF A FLUORESCENT INTENSIFIER SCREEN AND RADIOGRAPHIC PAPER,USED IN THE ENERGY RANGE FROM 30 KEV TO 150 KEV.)
NF E31-330-1-2000 燃油锅炉用供油系统的安装. 第1部分:安全要求和试验.部件,进气阀控制和安全装置,供气油罐 (Installations for oil supply systems for oil burners - Part 1: safety requirements and tests : parts, oil feed pumps, control and safety devices, supply tanks.)
NF T47-206-1982 橡胶和塑料.管和软管的外径、厚度和同心度的测量 (RUBBER OR PLASTICS BASED HOSES. MEASUREMENTS OF EXTERNAL DIAMETERS WALL THICKNESSES AND CONCENTRICITY.)
NF X10-312-1986 用溢流堰和水槽法测量明渠中的液流.三角堰 (LIQUID FLOW MEASUREMENT IN OPEN CHANNELS BY WEIRS AND FLUMES. TRIANGULAR PROFILE WEIRS.)
NF F56-357-1980 铁路固定设备.通讯和信号装置架空线路用器材.垂直固定用卧式双托架 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. DOUBLE HORIZONTAL BRACKET WITH VERTICAL FIXING.)
NF T60-212-2000 动物和植物脂肪和油脂.折光度的测定 (Animal and vegetable fats and oils - Determination of refractive index.)
NF T43-021-1996 卤化异丁烯一异戊二烯橡胶(BIIR和CIIR).鉴定程序 (RUBBER, HALOGENATED ISOBUTENE-ISOPRENE (BIIR AND CIIR). EVALUATION PROCEDURE.)
NF F56-3321-1980 NF F56-332-78的修改件1 ()
NF Q12-008-1988 纸和纸板.包装用“单槽“和“双槽“瓦楞纸特性 (PAPER AND BOARD. CORRUGATED FIBREBOARD. CHARACTERISTICS OF SINGLE WALL AND DOUBLE WALL CORRUGATED FIBREBOARD FOR PACKAGING.)
NF C52-378-2000 变流变压器.第1部分:工业用变压器 (Convertor transformers - Part 1 : transformers for industrial applications.)
NF S71-6011-1998 1994年NF S 71-601的补充件1 ()
NF R22-601-1945 自行车和摩托车鼓式制动器 (DRUM BRAKES FOR CYCLES AND MOTORCYCLES.)
NF A49-192-1981 钢管.压力容器用内螺纹非合金钢焊接套管 (STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.)
NF U43-129-1977 农药产品.三氯硝基甲烷.试验方法 (AGROPHARMACEUTICAL PRODUCTS. CHLOROPICRIN. TEST METHODS.)
NF Z62-022-1984 信息处理.文本传递用编码字符组.第2部分:拉丁字母和非字母的图形字符 (INFORMATION PROCESSING. CODED CHARACTER SETS FOR TEXT COMMUNICATION. PART 2 : LATIN ALPHABETIC AND NON-ALPHABETIC GRAPHIC CHARACTERS.)
NF D67-002-1973 家具.办公用家具术语 (FURNISHINGS. TERMINOLOGY RELATING TO OFFICE FURNITURE.)
NF F56-210-1980 铁路固定设备.通讯和信号装置架空线路用器材.钢筋混凝土底座用安装板 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. SMALL COUPLING PLATES FOR REINFORCED CONCRETE SOCKETS.)
NF C97-3021-1993 1990年NF C 97-302的补充件1 ()
NF T31-113-2000 涂料用补充剂.规范和试验方法.第16部分:氢氧化铝 (Extenders for paints - Specifications and methods of test - Part 16 : aluminium hydroxides.)
NF V76-112-1980 水果和蔬菜汁.钠和钾含量的测定(火焰分光光度法) (FRUIT AND VEGETABLE JUICES. DETERMINATION OF THE SODIUS AND POTASSIUM CONTENTS (FLAME SPECTROPHOTOMETRY METHOD).)
NF U02-017-1987 农林用拖拉机和器材.保证安全的技术装置.第17部分:酿制葡萄器材.型拖拉机.框架和安全工作间.动力试验方法. (AGRICULTURAL AND FORESTRY TRACTORS AND MACHINERY. TECHNICAL MEANS FOR PROVIDING SAFETY. PART 17 : EQUIPMENT FOR VINE MAKING.)
NF C64-1331-1995 NF C64-133-93补充件 ()
NF L52-400-509-2003 航空航天系列.飞行器用光纤和光缆.试验方法.第509部分:扭结试验 (Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509 : kink test.)
NF D35-302-1950 铁皮导管和弯头 (SMOKE PIPES AND BENDS MADE OF METAL SHEET.)
NF C23-5182-1983 C 23-518-82的补充2 ()
NF S77-1131-1998 1994年 NF S 77-113的补充件1 ()
NF F02-303-1990 铁路车辆.齿轮及传动齿轮 (RAILWAY ROLLING STOCK. GEARS PINIONS AND WHEELS.)
NF P98-790-1993 高速公路冬季维修和高速公路路边设施.基板.特性 (HIGHWAYS WINTER MAINTENANCE PLANT AND HIGHWAYS SIDE EQUIPMENT MAINTENANCE. BASE PLATE. CHARACTERISTICS.)
NF S61-804-1998 具有灭火功能的气雾剂发生器.要求,试验,和标志 (AEROSOL GENERATORS WITH EXTINGUISHING FUNCTION. REQUIREMENTS, TESTS, MARKING.)
NF Z84-392-10-10-2002 地面中继无线电系统(TETRA).声音加数据(V+D).第10部分:一级辅助服业务.子部分10:优先呼叫(PC) (Terrestrial trunked radio (TETRA) - Voice plus data (V+D) - Part 10 : supplementary services stage 1 - Sub-part 10 : priority call (PC).)
NF Q64-018-1981 印刷工艺.印刷和印刷油墨.印刷品在盐溶液中褪色性测定 (GRAPHIC TECHNOLOGY. PRINTING AND PRINTING INKS. DETERMINATION OF THE LIKELIHOOD OF COLOUR MIGRATION FROM A PRINT INTO A SALINE SOLUTION.)
NF S90-414-1988 外科医疗器械.外科植入物.不对称螺纹和球形底座接骨用不锈钢螺丝.机械性能和试验 (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.)
NF U43-019-1977 农药产品.三氯硝基甲烷.规范 (AGROPHARMACEUTICAL PRODUCTS. CHLOROPICRIN. SPECIFICATIONS.)
NF D62-043-3-2000 办公家具.遮板.第3部分:试验方法 (Office furniture - Screens - Part 3 : test methods.)
NF P78-345-2000 建筑玻璃.玻璃弯曲强度的测定.第5部分:试验表面积小的扁平试样的同轴双环试验 (Glass in building - Determination of the bending strength of glass - Part 5 : coaxial double ring test on flat specimens with small test surface areas.)
NF S11-804-1996 光学和光学仪器.接触镜片可萃取材料的测定方法 (OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. METHOD FOR DETERMINING THE EXTRACTABLE SUBSTANCES. (EUROPEAN STANDARD EN ISO 10340).)
NF C73-6342-1991 C73-634-82的补充2 ()
NF J95-035-1-2003 小艇.防火.第1部分:艇体最长达15m的小艇 (Small craft - Fire protection - Part 1 : craft with a hull length of up to and including 15 m.)
NF G52-209-1976 皮革.皮革的化学分析.氧化铝(Al2 O3 )含量的测定 (LEATHERS AND HIDES. CHEMICAL TESTING OF LEATHER. DETERMINATION OF ALUMINIUM OXIDE (AL203).)
NF P82-204-1957 载客电梯和货物电梯.传动机构带滑轮或铰盘的金属构架的计算规则 (LIFTS AND SERVICE LIFTS. RULES FOR THE DESIGN OF THE METAL FRAME WORK BEARING EITHER THE HOIST OR THE GUIDE PULLEYS.)
NF B35-523-1990 实验室用玻璃器皿.11ml的牛奶滴管 (LABORATORY GLASWARE. 11 ML MILK PIPETTE.)
NF C18-41511-1997 1993年NF C 18-415的补充件11 ()
NF S74-534-1996 消防人员用防护服.专业化消防用防护服的试验方法和要求 (PROTECTIVE CLOTHING FOR FIREFIGHTERS. TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALIZED FIRE FIGHTING. (EUROPEAN STANDARD EN 1486).)
NF A09-216-1985 无损检验.工业放射学.能级从50keV至1.5MeV用射线照相术底片和含有一个或两个荧光板的图象接收系统感光度和 ()
NF C33-100M1-1967 电力网用绝缘或保护电缆.电力网用缘缘导线.浸渍纸缘铅包电缆 ()
NF B53-646-2000 木和镶嵌地板.耐凹痕性的测定.试验方法 (Wood and parquet flooring - Determination of resistance to indentation (Brinell) - Test method.)
NF C93-752/A1-2001 印制电路用基材.第2部分:规范.第2号规范:酚醛纤维素纸覆铜箔层压板.经济型 (Base materials for printed circuits - Part 2 : specification - Specification n o 2 : phenolic cellulose paper copper-clad laminated sheet, economic quality.)
NF F11-405-1983 铁路车辆. 可拆卸支架加制动块. 高摩擦系数材料制250和300制动块 (RAILWAY ROLLING STOCK. BRAKE-SHOES WITH REMOVABLE INSERTS. 250 MM AND 320 MM INSERTS,MADE OF MATERIALS WITH A HIGH COEFFICIENT OF FRICTION.)
NF D61-061-1-1997 室外家具.野营,家用和定约用座位和桌子.第1部分:一般安全要求 (OUTDOOR FURNITURE. SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE. PART 1 : GENERAL SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 581-1).)
NF C32-102-4/A2-2003 额定电压为450/750V及以下的交联绝缘电缆.第4部分:软电线和软电缆 (Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 4 : cords and flexible cables.)
NF P98-103-1991 路面层.火山灰.规范 (ROAD FOUNDATIONS. POZZOLANA. SPECIFICATIONS.)
NF E27-381-1969 销钉轴和螺纹轴 (CLEVIS PINS AND SCREWED SPINDLES.)
NF S11-812-2000 眼科光学.接触透镜和接触透镜护理用品.保存剂吸收和释放率测定指南 (Ophtalmic optics - Contact lenses and contact lens care products - Guidelines for determination of preservative uptake and release.)
NF E48-202-1996 机械安全.液力系统和部件的安全要求.液压装置(欧洲标准EN 982) (SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. (EUROPEAN STANDARD EN 982).)
NF T31-108-2000 涂料补充剂.规范和试验方法.第10部分:天然片状滑石粉/亚氯酸盐 (Extenders for paints - Specifications and methods of test - Part 10 : natural, talc/chlorite in lamellar form.)
NF M88-769-1977 商用丙烷可动容器装置.接头.自动换向装置.制造.功能.试验 (COMMERCIAL PROPANE INSTALLATIONS IN MOVABLE CONTAINERS. AUTOMATIC COUPLER-REVERSER. CONSTRUCTION-OPERATION-TESTS.)
NF C73-2511-1985 补充1 ()
NF A05-690-1996 阴极保护.质保人员权限等级的定义 (CATHODIC PROTECTION. DEFINITION OF COMPETENCE LEVELS OF OPERATORS FOR THEIR QUALIFICATION.)
NF G07-189-1-1999 织物.床上用品的燃烧性能.第1部分:由隐燃香烟引起的可燃性的一般试验方法 (TEXTILES. BURNING BEHAVIOUR OF BEDDING ITEMS. PART 1 : GENERAL TEST METHODS FOR THE IGNITABILITY BY A SMOULDERING CIGARETTE. (EUROPEAN STANDARD EN ISO 12952-1).)
NF S31-300-2000 家用及类似用途电器.空气噪声测量的试验规程.第1部分:一般要求 (Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 1 : general requirements.)
NF C32-021-1985 设备用绝缘电缆和导线.特殊导线中用的电缆.试验方法 (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. TEST METHODS FOR CABLES AND CORDS USED UNDER SPECIAL CONDITIONS.)
NF Q11-007-1977 纸和纸板.卡片纸特性 (PAPER AND BOARD. CHARACTERISTICS OF PAPER FOR INDEX CARDS.)
NF M06-003-2000 石油工业.术语.第2部分:特性和试验 (Petroleum industry - Terminology - Part 2 : properties and tests.)
NF F52-164-1995 铁路固定设备.指示和行人穿越道的锁定.对向道岔锁定检验 (RAILWAY FIXED EQUIPMENT. LOCKING OF POINTS AND CROSSING. FACING POINT LOCK PROVING.)
NF L22-519-2000 航空用螺栓和螺母.自锁十二角头螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1550MPa(室温)/235℃ (Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.)
NF F07-024-1992 铁路固定设备和车辆.电磁干拢.铁路信号和电信电缆50H2频率的屏蔽系数的确定和测量 (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. DETERMINATION AND MEASUREMENT OF SCREENING FACTOR WITH A FREQUENCY OF 50 HZ OF RAILWAY SIGNALLING AND TELECOMMUNICATION CABLES.)
NF P98-245-2-1994 有关路面的试验.水泥混凝土表面产品木桩.第2部分:粘状产品分布的测量 (TESTS RELATING TO PAVEMENTS. SPILLING OF A PRODUCT ON THE SURFACE OF A LAYER OF CIMENT CONCRETE. PART 2 :MEASUREMENT OF THE DISTRIBUTION OF A GRANULAR PRODUCT.)
NF T70-333-1995 军用高能材料.物理-化学分析及特性.烈性炸药的水下机械筛分的粒度分布 (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. PARTICLE SIZE BY UNDERWATER MECHANICAL SCREENING OF HIGH EXPLOSIVES.)
NF E58-113-2-1995 土方机械.操作员的视野.第2部分:评定方法 (EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 2 : EVALUATION METHOD.)
NF P90-115-2000 运动场表面.耐冲击力的测定 (Surface for sports areas - Determination of resistance to impact.)
NF T30-056-1974 涂料.天然老化试验指南 (PAINTS. CONDUCT OF NATURAL WEATHERING TESTS.)
NF X41-603-1976 纺织品的防护.航海用天然纤维绳缆抗微生物侵蚀的试验方法 (PROTECTION OF TEXTILES. METHOD OF TEST FOR THE RESISTANCE TO MICROORGANISMS OF NATURAL FIBRE ROPES AND CORDAGE INTENTED FOR MARINE USE.)
NF R13-624-1990 道路车辆.专用示警灯.尺寸 (ROAD VEHICLES. SPECIAL WARNING LAMPS. DIMENSIONS.)
NF M88-727-2003 液化石油气罐.处置 (LPG tanks - Disposal.)
NF R16-218-1986 道路车辆.压燃内燃机用带水平法兰用螺栓固定的燃油滤清器头.安装和连接尺寸 (ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
NF L06-822-1988 航空和航天.喷丸.石英 (AEROSPACE INDUSTRY. BLAST MEDIA. QUARTZ.)
NF B55-007-1965 成品.绝缘导线和电缆用木制卷轴 (FINISHED PRODUCTS. WOODEN REELS FOR INSULATED CONDUCTORS AND CABLES.)
NF G60-003-1977 鞋.标志 (SIZES OF SHOES.MARKING.)
NF G07-019-3-1988 纺织.印染牢度试验.第X03部分:耐碳化作用牢度 (TEXTILES. TESTS FOR COLOUR FASTNESS. PART X03 : COLOUR FASTNESS TO CHLORINATION.)
NF T94-100-1997 人类用水的处理试剂.硫酸铝(欧洲标准EN 878) (CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. ALUMINIUM SULFATE. (EUROPEAN STANDARD EN 878).)
NF G07-189-3-1999 织物.床上用品的燃烧性能.第3部分:由一小团明火引起的可燃性的一般试验方法 (TEXTILES. BURNING BEHAVIOUR OF BEDDING ITEMS. PART 3 : GENERAL TEST METHODS FOR THE IGNITABILITY BY A SMALL OPEN FLAME. (EUROPEAN STANDARD EN ISO 12952-3).)
NF S60-213-2001 灭火介质.泡沫浓缩.第3部分:不与水混溶的液体表面应用的媒介物低膨胀泡沫浓缩的规范 (Fire extinguishing media - Foam concentrates - Part 3 : specification for low expansion foam concentrates for surface application to water-immiscible liquids.)
NF T70-334-1995 军用高能材料.物理-化学分析及特性.烈性炸药的干式机械筛分的粒度分布 (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. PARTICLE SIZE BY DRY MECHANICAL SCREENING OF HIGH EXPLOSIVES.)
NF G62-408-2000 鞋.老化调节 (Footwear - Ageing conditioning.)
NF E62-151-1982 机床.往复式金属锯床.尺寸.能力 (MACHINE TOOLS. HACK-SAWING MACHINES. DIMENSIONS. RATINGS.)
NF E52-082-1982 塔式起重机.一般安全规则 (GENERAL RULES RELATIVE TO SAFETY OF TOWER CRANES.)
NF D65-760-1954 家具.矩形金属衣橱 (FURNITURE. METALLIC RECTANGULAR LOCKERS.)
NF C47-7341-1998 1993年NF C 47-734的补充件1 ()
NF R16-207-1955 平圆柱形接头软管 (FLEXIBLE PIPES WITH SMOOTH CYLINDRICAL ENDS.)
NF C91-02011-1997 1995年NF C 91-020的补充件11 ()
NF X43-254-1990 工作环境的空气.一氧化碳质量浓度的测定.短时间取样直接显示检测管法 (WORK-PLACE AIR. DETERMINATION OF MASS CONCENTRATION OF CARBON MONOXIDE. METHOD USING DETECTOR TUBES FOR SHORT-TERM SAMPLING WITH DIRECT INDICATION.)
NF X50-144-1-2000 试验.试验设计和实现.环境中的试验.第1部分:过程的基础 (Tests - Test design and realization - Test in environment - Part 1 : bases of the process.)
NF P98-709-1992 道路建造和维修设备.切削扩展机.术语.技术和商业规范 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. CHIPS SPREADERS. TERMINOLOGY. TECHNICAL AND COMMERCIAL SPECIFICATIONS.)
NF S71-505-1993 工作定位和防高处坠落个人防护设备.工作定位系统 (PERSONAL EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT. WORK POSITIONING SYSTEMS. (EUROPEAN STANDARD EN 358).)
NF R16-306-1953 喷射泵连接管 (COUPLINGS FOR INJECTION PUMPS.)
NF X43-040-2000 大气空气.在一过滤媒介上颗粒物质质量的测量.β射线吸收法 (Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method.)
NF A81-323-1981 实心金属裸双焊条.有耐热钢的出的电弧焊用粉末焊剂.符号.规范.试验 (COMBINATIONS OF BARE SOLID-METAL ELECTRODE WIRES AND POWDER FLUXES FOR ELECTRIC ARC WELDING,DEPOSITING A HEAT RESISTING STEEL. SYMBOLISATION. REQUIREMENTS. TESTS.)
NF T73-239-1988 表面活性剂.工业用线性烷基苯磺酸钠.平均分子量的测定.气液色谱法 (SURFACE ACTIVE AGENTS. TECHNICAL STRAIGHT-CHAIN SODIUM ALKYLBENZENESULFONATES. DETERMINATION OF MEAN RELATIVE MOLECULAR MASS BY GAS-LIQUID CHROMATOGRAPHY.)
NF M60-317-2001 核能.核燃料技术.废物.在初步化学抽提后通过液体闪烁对流出的废水和废物中镍63的测定 (Nuclear energy - Nuclear fuel technology - Waste - Determination of nickel 63 in effluents and waste by liquid scintillation after a preliminary chemical extraction.)
NF E58-011-11-1998 1993年NF E 58-011-1的补充件1 ()
NF C63-12011-1997 1996年NF C 63-120的补充件11 ()
NF E15-038-1989 工业压力表.金属指示压力表.绝对压力计 (INDUSTRIAL PRESSURE GAUGES. METALLIC PRESSURE GAUGE INDICATORS. ABSOLUTE PRESSURE GAUGES.)
XP D36-110-2000 家政学.燃烧丁烷和丙烷的家庭装置用的带夹具的符合NF D 36-101标准的挠性软管的连接件 (Household economy - Connection assemblies of flexible hoses to standard NF D 36-101 with clamping devices for butane and propane-fired domestic appliances.)
NF C73-2471-1993 1991年NF C 73-247的补充件1 ()
NF C32-208-1985 设备用绝缘电缆和导线.额定电压450/ 750V的聚氯乙烯绝缘导线.用铝作硬质心线.国家2类型号系列 (INSULATED CABLES AND FLEXIBLE CORDS FOR INSTALLATIONS. PVC INSULATED SINGLE-CORE NON SHEATHED CABLES WITH RIGID STRANDED ALUMINIUM CONDUCTOR OF RATED VOLTAGES 450/750 V. SERIES OF THE NATIONAL TYPE OF CATEGORY 2.)
NF H31-342-2000 钢桶.最小总容量216.5升的密封顶盖桶 (Steel drums - Non-removable head (tight head) drums with a minimum total capacity of 216,5 l.)
NF D38-3021-1980 NF D38-302-66的补充件1 ()
NF P24-203-2-1993 建筑工程.私人合同.金属制品.第2部分:特别条款 (DTU 37-1. BUILDING WORKS. PRIVATE CONTRACTS. METAL JOINERY. PART 2 : SPECIAL CLAUSES.)
NF L43-603-1974 带法兰的接头.环形接头 (FLANGED CONNECTIONS. O-RINGS.)
NF E62-253-1976 机床构造标准部件.多轴头.密封条框环 (UNIT HEADS. MULTI SPINDLE HEADS. JOINT HOUSING RING.)
NF C32-102-11-1999 额定电压大于和包括450/750V的橡胶绝缘电缆.第11部分:EVA束和柔软电缆 (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 11 : EVA CORDS AND FLEXIBLE CABLES.)
NF V32-150-1987 香料和佐料.黑黄蒿和金黄蒿.规范 (SPICES AND CONDIMENTS. WHOLE BLACK AND BLOND CARAWAY (CARUM CARVI LUNNAEUS). SPECIFICATION.)
NF P98-627-1991 横路标.公路上使用的标记.有机氯的定量测定 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ORGANIC CHLORINE DETERMINATION.)
NF A49-148-1980 钢管.一般用和管道用光端纵向焊接钢管.铁素体不锈钢.(尺寸.交货技术条件.) (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF A04-107-1980 钢铁产品.测定非合金钢线材中非金属杂质含量的显微照相方法 (IRON AND STEEL. MICROGRAPHIC METHOD OF DETERMINATION OF THE NON METALLIC INCLUSION CONTENT OF UNALLOYED WIRE ROD.)
NF E27-951-2000 钢丝钉.第1部分:一般用途的散装钉 (Steel wire nails - Part 1 : loose nails for general applications.)
NF T20-416-1975 工业碳酸钠.氯含量的测定.汞液滴定法 (SODIUM CARBONATE FOR INDUSTRIAL USE. DETERMINATION OF CHLORIDE CONTENT. MERCURIMETRIC METHOD.)
NF T20-418-1975 工业碳酸钠.铁含量的测定.1,10-菲绕啉光度分析法 (SODIUM CARBONATE FOR INDUSTRIAL USE. DETERMINATION OF IRON CONTENT. 1,10 - PHENANTHROLINE PHOTOMETRIC METHOD.)
NF C45-2111-1985 C45-211-77的补充1 ()
NF H96-315-2000 工业卡车.电磁兼容性 (Industrial trucks - Electromagnetic compatibility.)
NF A50-120-2000 铝和铝合金.锻造产品.生产压力器件的产品的特殊要求 (Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment.)
NF Q64-023-1983 印刷工艺.印刷、印刷油墨和印刷受体.用于光学测试的标准印刷件的制备 (GRAPHIC TECHNOLOGY. PRINTING,PRINTING INKS AND SUBSTRATES. PREPARATION OF STANDARD PRINTS FOR OPTICAL MEASUREMENTS.)
NF Q40-001-1966 纸.卷纸筒用心轴内径 (PAPER. INSIDE DIAMETERS OF MANDRELS FOR SPOOLS OF PAPER.)
NF B53-601-2-1997 圆木和锯材.术语.第2部分:有关圆木的通用术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 2 : GENERAL TERMS RELATING TO ROUND TIMBER. (EUROPEAN STANDARD EN 844-2).)
NF C31-320M1-1967 电气构件中的导体和导线.带有包皮、编织物或绝缘带的绝缘铜线 ()
NF Z82-745-1-2000 综合业务数字网(ISDN).信号等待指示(MWI)补充服务.数字用户信号系统1(DSSI)协议.第1部分:协议规范 (Integrated services digital network (ISDN) - Message Waiting Indication (MWI) supplementary service - Digital Subscriber Signalling System no. one (DSS1) protocol - Part 1 : protocol specification.)
NF F73-011-1992 铁路固定设备和铁路车辆.带L制式无线电地面/流动发射出的电视设备 (FIXED EQUIPMENT AND ROLLING STOCK OF RAILWAYS. EQUIPMENT OF TELEVISION WITH TRANSMISSION RADIO GROUND/MOBILE.)
NF E25-163-1992 蝶形端开槽调整螺钉 (SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)
NF C74-3831-1986 C74-383-86的补充1 ()
NF E58-0501-1998 1995年NF E 58-050的补充件1 ()
NF A51-126-2-2001 铜和铜合金.空气调节和制冷用无缝圆形铜管.第2部分:设备用管 (Copper and copper alloys - Seamless, round copper tubes for air conditioning and refrigeration - Part 2 : tubes for equipment.)
NF B49-421-1990 耐火材料制品.铝矾土、硅质材料、碳化硅、碳和金属硅耐火材料制品的化学分析 (REFRACTORY PRODUCTS. CHEMICAL ANALYSIS OF ALUMINOUS,SILICEOUS,SILICON CARBIDE,CARBON AND METALLIC SILICON REFRACTORY PRODUCTS.)
NF A80-021-2000 焊接及有关工艺.工艺和参考值的命名 (Welding and allied processes - Nomenclature of processes and reference numbers.)
NF F62-011-2-1992 铁路车辆.一般功能要求.晶体管镇流器.特殊叶片间的联系 (RAILWAY ROLLING STOCK. FUNCTIONAL GENERAL REQUIREMENTS. TRANSISTORIZED BALLASTS. COLLECTION OF PARTICULAR LEAVES.)
NF P98-086-1992 路面.土工路面的结构设计.设计要素 (PAVEMENTS. EARTHWORKS ROAD PAVEMENT STRUCTURAL DESIGN. DESIGN ELEMENTS.)
NF M60-770-2000 核能.环境放射性的测量-空气.土壤中大气性沉淀物活性浓度的测定 (Nuclear energy - Measurment of environnemental radioactivity-Air - Determination of the activity concentration for atmospheric deposits on the soil.)
NF C93-372-2-2003 铁氧体软磁芯的术语和命名.第2部分:尺寸参考 (Terms and nomenclature for cores made of magnetically soft ferrites - Part 2 : reference of dimensions.)
NF S71-519-1998 防止由高处跌落的个人防护设备.低拉力绳索 (PERSONAL PROTECTIVE EQUIPMENT FOR THE PREVENTION OF FALLS FROM A HEIGHT. LOW STRETCH KERNMANTEL ROPES. (EUROPEAN STANDARD EN 1891).)
NF T20-424-1976 工业氢氧化钠.二氧化硅含量的测定.还原钼酸络合物分光光度法 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF SILICA CONTENT. REDUCED SILICOMOLYBDIC COMPLEX PHOTOMETRIC METHOD.)
NF Z41-020-1997 信息和文献工作.检索的内容、结构和介绍指南 (INFORMATION AND DOCUMENTATION. GUIDELINES FOR THE CONTENT, ORGANIZATION AND PRESENTATION OF INDEXES.)
NF L21-216-1980 铝合金制90°埋头铆钉(英寸) (90 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF D27-301-1940 家政学.缝衣针 (DOMESTIC ECONOMY. HAND NEEDLES.)
NF C93-621-2000 用π型网络的零相位技术测量石英晶体单元参数.第1部分:用π型网络零相位技术测量石英谐振器的谐振频率和谐 (Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1 : basic method for the measurement of resonance frequency and resonance resistance of quartz crystal unit)
NF Q03-052-1988 纸张和纸板试验.瓦楞纸板.抗裂强度测定 (PAPER AND BOARD. CORRUGATED FIBREBOARD. DETERMINATION OF BURSTING STRENGTH.)
NF T51-356-1999 塑料.非增塑的醋酸纤维素.水分含量的测定 (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF MOISTURE CONTENT. (EUROPEAN STANDARD EN ISO 585).)
NF F11-415-1990 铁路车辆.带铸铁制齿冠的制动盘 (RAILWAY ROLLING STOCK. BRAKE DISCS WITH CAST IRON RING.)
NF F19-809-3-1997 铁路车辆.原动力机械运输用耐高压油.第3部分:高热稳定性油.后部固定机械的耐久性试验 (RAILWAY ROLLING STOCK. “EXTREME PRESSURE“ OILS FOR MECHANICAL TRANSMISSIONS OF MOTIVE POWER UNITS. PART 3 : HIGH THERMAL STABILITY OIL. ENDURANCE TEST METHOD ON FIXED POST MACHINE.)
NF S76-033-1995 呼吸保护装置.压缩空气管呼吸仪的要求、试验、标志 (RESPIRATORY PROTECTIVE DEVICES. COMPRESSED AIR LINE BREATHING APPARATUS FOR USE WITH A FULL FACE MASK, HALF MASK OR A MOUTHPIECE ASSEMBLY. REQUIREMENTS, TESTING, MARKING. (EUROPEAN STANDARD EN 139).)
NF G07-189-2-1999 织物.床上用品的燃烧性能.第2部分:由隐燃香烟引起的可燃性的特殊试验方法 (TEXTILES. BURNING BEHAVIOUR OF BEDDING ITEMS. PART 2 : SPECIFIC TEST METHODS FOR THE IGNITABILITY BY A SMOULDERING CIGARETTE. (EUROPEAN STANDARD EN ISO 12952-2).)
NF C93-110-1971 铝固定电解质电容器.一般规定 (COMPONENTS FOR ELECTRONIC EQUIPMENT. FIXED ALUMINIUM ELECTRONIC CAPACITORS. GENERAL REQUIREMENTS.)
NF T20-818-1987 工业用丙烯和丁二烯.液相取样 (PROPYLENE AND BUTADIENE FOR INDUSTRIAL USE. SAMPLING IN THE LIQUID PHASE.)
NF B53-612-1-1997 圆木和锯材.尺寸的测量方法.第1部分:锯材 (ROUND AND SAWN TIMBER. METHOD OF MEASUREMENT OF DIMENSIONS. PART 1 : SAWN TIMBER. (EUROPEAN STANDARD EN 1309-1).)
NF S61-985-2001 火焰探测和火警系统.第5部分:热探测器.点探测器 (Fire detection and fire alarm systems - Part 5 : heat detectors - Point detectors.)
NF G52-313-2001 皮革.色牢度试验.对温和洗涤的色牢度 (Leather - Tests for colour fastness - Colour fastness to mild washing.)
NF F01-812-1-1990 铁路车辆.钢的电弧和电阻焊接接头.第1部分:对接焊和角接接头中缺陷验收准则 (RAILWAY ROLLING STOCK. ART AND RESISTANCE WELDED JOINTS OF STEELS. PART 1 : ACCEPTANCE CRITERIA FOR DEFECTS IN WELDED BUTT AND CORNER JOINTS.)
NF Z67-010-1975 信息处理.数据和程序流程图符号和规定? (FLOW CHART SYMBOLS FOR USE IN DATA AND PROGRAM FLOW CHARTS.)
NF C73-879-2000 家用和类似用途电器的安全.第2-79部分:工业和商业用高压清洁器的特殊要求 (Safety of household and similar electrical appliances - Part 2-79 : particular requirements for high pressure cleaners, for indutrial and commercial use.)
NF T90-363-1998 防水和防地面污染的制品.有吸收能力产品的标签 (PRODUCTS AGAINST WATER AND GROUND POLLUTION. LABELLING OF ABSORBENT PRODUCTS.)
NF E74-303-2001 螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸 (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.)
NF E29-042-1-2000 法兰及其接头.螺栓连接.第1部分:螺栓连接的选择 (Flanges and their joints - Bolting - Part 1 : selection of bolting.)
NF T77-152-1987 工业硅树脂.硅含量的测定(硅含量小与百分之一(m /m ).原子吸收分光光度法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF SILICON CONTENT (SILICON CONTENT LESS THAN 1 PER CENT (M/M)). METHOD BY ATOMIC ABSORPTION SPECTROMETRY.)
NF Z87-830-2000 电磁兼容性和无线电频谱管理(ERM).只在1,5GHz频带上提供电信数据的接受移动地面卫星运行用电磁兼容性. (Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communi)
NF G62-003-1982 鞋.皮鞋底动力渗透性试验方法 (FOOTWEAR. METHOD OF TEST FOR THE DYNAMIC WAYER PROOFNESS OF SOLING LEATHER.)
NF T20-243-1982 工业用液态氯.电解法测定水含量 (LIQUID CHLORINE FOR INDUSTRIAL USE. DETERMINATION OF WATER CONTENT USING AN ELECTROLYTIC ANALYSER.)
NF P84-522-1994 覆地薄膜.用倾斜面法测量覆地薄膜衬里倾斜角 (GEOMEMBRANES. MEASUREMENT OF THE GEOMEMBRANE LINING SYSTEMS SLIPPING ANGLE BY MEANS OF AN INCLINED PLANE TEST.)
NF E25-103-1977 扭力弹簧.给制造者的指示 (TORSIONAL SPRINGS. INFORMATION TO BE SUPPLIED TO THE MANUFACTURER.)
NF Q03-034-1968 纸张和纸板试验.瓦楞纸板.耐动态穿孔强度测定 (PAPER AND BOARD TESTS. CORRUGATED BOARD. DETERMINATION OF DYNAMIC PUNCTURE STRENGTH.)
NF P82-5011-1998 1995年NF P 82-501的补充件1 ()
NF F55-0511-1978 铁路固定设备.地下电缆用钢筋混凝土轻型槽构件.补充件1 ()
NF Z15-154-1999 识别卡系统.人机接口.第4部分:有特殊需要的人用的用户要求编码 (IDENTIFICATION CARD SYSTEMS. MAN-MACHINE INTERFACE. PART 4 : CODING OF USER REQUIREMENTS FOR PEOPLE WITH SPECIAL NEEDS. (EUROPEAN STANDARD EN 1332-4).)
NF L14-216-1994 航空航天系列.铝合金AL-P6081-.T6.0.3mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6081-. T6. SHEET AND STRIP. 0,3 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2695).)
NF H96-112-4-1999 垃圾收集用提升设备.第4部分:检验提升设备的要求和试验方法 (LIFTING DEVICES FOR REFUSE COLLECTION. PART 4 : REQUIREMENTS FOR CHECKING THE LIFTING DEVICE AND TEST METHODS.)
NF X20-704-2000 2级电子呼吸分析仪.通过对呼出的气体分析对乙醇的估计.规范和试验方法 (Class 2 electronic breath analyser - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods.)
NF A09-222-1985 无损检验.工业放射学.使用带荧光板的射线片子的鉴定卡 (NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. IDENTIFICATION CARD FOR RADIOGRAPHIC PAPERS USED WITH FLUORESCENT INTENSIFIER SCREENS.)
NF T51-143-1974 塑料.聚酰胺载体.石墨碳黑和玻璃纤维成分的测定 (PLASTICS. FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF GRAPHITE OR CARBON BLACK AND FIBER GLASS.)
NF L10-500-1-1993 航空航天系列.钢.锻坯和锻件.技术规范.第1部分:一般要求 (AEROSPACE SERIES. STEEL. FORGING STOCK AND FORGINGS. TECHNICAL SPECIFICATION. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 2157-1).)
NF C15-140-1963 电栅栏.安装和维修规则 (ELECTRIC FENCES. RULES FOR INSTALLATION AND MAINTENANCE.)
NF C20-790-5-2-2001 静电学.第5-2部分:有静电现象的电子设备的保护.用户指南 (Electrostatics - Part 5-2 : Protection of electronic devices from electrostatic phenomena - User guide.)
NF P24-203-1-1993 建筑工程.金属制品.第11部分:技术规范? (DTU 37-1. BUILDING WORKS. METAL JOINERY. PART 1 : TECHNICAL SPECIFICATIONS.)
NF P37-414-1967 屋顶附件.钢板或冲压带钢制嵌有相应长度杆的螺栓卡箍 (ROOFING ACCESSORIES. STAMPED SHEET OR STRIP METAL BOLT CLAMPS WITH INSERTED PIN.)
NF L21-213-1980 铝合金制120°埋头铆钉(英寸) (120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF F56-356-1980 铁路固定设备.通讯和信号装置架空线路用器材.“VALTIER” 式双托架 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. “VALTIER“ DOUBLE BRACKET.)
NF H44-034-1986 烟雾剂发生器.玻璃容器.11mm瓶口尺寸 (AEROSOLS DISPENSERS. GLASS CONTAINERS. DIMENSIONS OF FINISH 11 MM.)
NF E09-037-1997 机械安全.双手控制设备.功能.设计原理(欧洲标准EN 574) (SAFETY OF MACHINERY. TWO-HAND CONTROL DEVICES. FUNCTIONAL ASPECTS. PRINCIPLES FOR DESIGN. (EUROPEAN STANDARD EN 574).)
NF P26-102-1971 窗栓.定义.分类,名称 (BUILDING HARDWARE. CASEMENT BOLTS. DEFINITIONS. CLASSIFICATION. DESIGNATION.)
NF A21-103-1976 铬矿石的化学分析.氧化铁的测定.滴定法 (CHEMICAL ANALYSIS OF CHROMIUM ORES. DETERMINATION OF IRON OXIDE. TITRIMETRIC METHOD.)
NF H35-037-1987 制瓶工业.“药剂”型塑料瓶的螺纹瓶口.尺寸 (BOTTLING INDUSTRY. PLASTIC SCREW FINISH. PHARMACY TYPE. DIMENSIONS.)
NF M60-421-2000 核能.用溶剂色谱法在同位素稀释分析中对硝酸溶液中铀和钚纯化和化学分离 (Nuclear energy - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and dilution analysis by solvent chromatography.)
NF E62-250-1976 机床构造标准部件.多轴头.简单直齿轮 (UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE STRAIGHT TOOTHED PINIONS.)
NF E62-246-1976 机床构造标准部件.多轴头.中间传动轴 (MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. DRIVEN COUNTERSHAFTS.)
NF P37-416-1967 屋顶附件.带钢制嵌有廷长杆的螺栓卡箍? (ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH EXTENDED PIN.)
NF P52-302-1-1993 建筑工程.通过混凝土电缆装置进行楼道取暖.第1部分:技术规范 (DTU 65-7. BUILDING WORKS. EXECUTION OF FLOOR HEATING THROUGH ELECTRIC CABLES SET IN CONCRETE. PART 1 : TECHNICAL SPECIFICATIONS.)
NF D74-201-1990 售货用冷藏柜台.鲜鱼冷藏用0℃以上或以下存储台.冷冻性能的测定 (REFRIGERATED CABINETS. STORAGE CABINETS WITH POSITIVE OR NEGATIVE TEMPERATURE FOR DISHES COOKED BEFOREHAND. MEASUREMENTS OF THE REFRIGERATING PERFORMANCES.)
NF F52-161-1995 铁路固定设备.闸口与转轨器的控制.对向轨闸拉伸机 (RAILWAY FIXED EQUIPMENT. CONTROL OF POSITION OF POINTS AND CROSSING. FACING POINT STRETCHER.)
NF Z15-602-1997 机读卡.保健应用.发行人识别符的编号系统和注册程序 (MACHINE READABLE CARDS. HEALTH CARE APPLICATIONS. NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR ISSUER IDENTIFIERS. (EUROPEAN STANDARD EN 1867).)
NF T60-506-1988 润滑剂、工业用油及相关产品(L类).分类.第9部分:X系列(润滑脂) (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 9 : FAMILY X (GREASES).)
NF P32-201-2-1993 建筑工程.私人合同.石板制屋顶.第2部分:特别条款 (DTU 40-11. BUILDING WORKS. PRIVATE CONTRACTS. ROOF COVERING MADE OF SLATES. PART 2 : SPECIAL CLAUSES.)
NF P10-402-1944 概述.门栏的尺寸 (GENERAL. DIMENSIONS OF DOOR OPENINGS.)
NF P15-443-1960 水硬性粘合料.试验技术.澄清法 (HYDRAULIC BINDERS. FLUOROMETRY.)
NF D36-3901-1999 1997年NF D 36-390的补充件1 ()
NF T73-010-1986 肥皂和洗涤剂.生产期间取样方法 (SOAPS AND DETERGENTS. TECHNIQUES OF SAMPLING DURING MANUFACTURE.)
NF P15-202-2-1993 建筑工程.私人合同.具有粘合料的多孔矿物纤维覆盖层.第2部分:特别条款 (DTU 27-1. BUILDING WORKS. PRIVATE CONTRACTS. COVERINGS FROM BLOWN-OUT MINERAL FIBRES WITH BINDER. PART 2 : SPECIAL CLAUSES.)
NF D64-010-1-1995 家具.软垫和床板可燃性的评定.第1部分:点火源:阴燃卷烟 (FURNITURE. ASSESSMENT OF THE IGNITABILITY OF MATTRESSES AND UPHOLSTERED BED BASES. PART 1 : IGNITION SOURCE. SMOULDERING CIGARETTE. (EUROPEAN STANDARD EN 597-1).)
NF U44-101-2000 土壤改良剂和生长介质,取样 (Soil improvers and growing media - Sampling.)
NF E29-8011-1999 NF E29-801-1995的补充件1 ()
NF E49-003-5-1995 气动液力传动.10bar气缸.32mm-320mm缸筒.第5部分:MS 3 高角头 (PNEUMATIC FLUID POWER. 10 BAR CYLINDERS. 32 MM TO 320 MM BORES. INTERCHANGEABILITY DIMENSIONS. PART 5 : HIGHT HEAD ANGLE MS 3.)
NF P98-300-1994 弓背式或不规则四边形速度档板.几何特性和定位参数 (HUMPBACK OR TRAPEZOIDAL SPEED BUMPS. GEOMETRIC CHARACTERISTICS AND SITUATION PARAMETERS.)
NF Z64-701-1984 信息处理.在200mm(8in)软磁盘上利用2个频率以13,262ftprad录制在一面的信息交换.磁道示 (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGES USING TWO-FREQUENCY RECORDING AT 13 262 FTPRAD ON ONE SIDE. TRACK FORMAT.)
NF D27-402-1971 室内安装的信箱 (LETTER BOXES FOR INDOOR INSTALLATION.)
NF T20-241-1982 工业用液态氯.适用于测定氯的容积含量的取样方法 (LIQUID CHLORINE FOR INDUSTRIAL USE. METHOD OF SAMPLING (FOR DETERMINING ONLY THE VOLUMETRIC CHLORINE CONTENT).)
NF T43-113-1980 橡胶.球状天然橡胶.涂层定量.规范和测定 (NATURAL RUBBER IN BALES. AMOUNT OF BALE COATING. SPECIFICATION AND DETERMINATION.)
NF T30-057-1974 涂料.人工照明室内涂料耐照明程度的计算 (PAINTS. EVALUATION OF FASTNESS TO ARTIFICIAL LIGHT OF PAINTS FOR INTERIOR USE.)
NF A95-342-1985 粉末冶金.包括硬金属在内的烧结金属材料.显微照相检查技术 (POWDER METALLURGY. SINTERED MATERIALS INCLUDING HARDMETALS. MICROGRAPHIC EXAMINATION TECHNIQUES.)
NF S76-024-2-1999 呼吸保护装置.气瓶阀.插座接头 (RESPIRATORY PROTECTIVE DEVICES. GAS CYLINDER VALVES. PART 2 : OUTLET CONNECTIONS. (EUROPEAN STANDARD EN 144-2).)
NF S74-5141-1999 NF S74-514-95的补充件1 ()
NF T70-502-1995 军用高能材料.安全及易损性.纹板间隙试验 (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. CARD GAP TEST.)
NF R16-325-1986 道路车辆.特种用途车辆用空气滤芯.P型和R型.尺寸 (ROAD VEHICLES. AIR FILTER ELEMENTS FOR PASSENGER CARS. TYPES P AND R. DIMENSIONS.)
NF T20-472-1973 工业磷酸.钙含量的测定.容量法 (PHOSPHORIC ACID FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM. VOLUMETRIC METHOD.)
NF S90-361-1990 外科医疗器械.钉子.股骨最高端用的不锈钢片 (MEDICO-SURGICAL EQUIPMENT. ROUGH-SURFACED STAINLESS STEEL NAIL PLATES FOR THE UPPER END OF THE THIGHBONE. MATERIALS AND DIMENSIONS.)
NF M11-006-1965 煤的AUDIBERT-ARNU膨胀计试验 (SOLID FUELS. AUDIBERT-ARNU DILATOMETER TEST FOR COAL.)
NF C93-910-12-2000 光纤连接器接口.第12部分:FS 型连接器门类 (Fibre optic connector interfaces - Part 12 : type FS connector family.)
NF D27-302-1940 家政学.饰针 (DOMESTIC ECONOMY. PINS.)
NF T51-357-1999 塑料.醋酸纤维素.模塑时粘度降低的测定 (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF VISCOSITY LOSS ON MOULDING. (EUROPEAN STANDARD EN ISO 1599).)
NF T51-523-1976 塑料.环氧树脂和缩水甘油酸酯.无机氯的测定.直接滴定法 (PLASTICS. EPOXY RESINS AND GLYCIDIC ESTERS. DETERMINATION OF INORGANIC CHLORINE. DIRECT TITRATION METHOD.)
NF C47-7391-1997 家用和类似用途电器的自动电控制器.第2部分:第9节:热敏控制器的特殊要求.第1次修改 ()
NF E62-252-1976 机床构造标准部件.多轴头.撑圈 (MODULAR UNITS FOR MACHINE TOOLS. MULTI SPINDLE HEADS. STAYS.)
NF Z86-784-2000 卫星地面站和系统.在11/12GHZ频率带范围操作的只接收电视的卫星地面站 (Satellite Earth Station and Systems (SES) - Television Receive-Only (TVRO) satellite earth stations operating in the 11/12 GHz frequency bands.)
NF T60-360-1980 工业甘油.取样 (GLYCERINES FOR INDUSTRIALUSE. SAMPLING.)
NF T60-602-1995 工业齿轮用耐特高压润滑剂.人工老化氧化稳定性的评定 (EXTREME PRESSURE LUBRICANTS FOR INDUSTRIAL GEARS. EVALUATION OF OXIDATION STABILITY BY ARTIFICIAL AGEING.)
NF Z43-034-1982 在16mm缩微胶卷和A6缩微胶片上进行报刊分幅缩微照相 (MICROFILM OF PRESS CUTTINGS ON 16 MM AND A6 SIZE MICROFICHE.)
NF T54-504-1976 塑料.轻塑料制品.弯曲试验 (LIGHT PLASTICS PRODUCTS. BENDING TEST.)
NF P98-231-5-1997 有关路面的试验.非沥青材料的压实试验.第5部分:使用声波检验法测定粒状粘结材料的使用寿命 (TESTS RELATING TO PAVEMENTS. COMPACTION TESTS ON NON BITUMINOUS MATERIALS. PART 5 : WORKABILITY TIME LIMIT DETERMINATION OF GRANULAR MATERIALS BOUND WITH CEMENTITIOUS BINDER USING SONIC EXAMINATION.)
NF E52-210-1983 脚操纵踏板.一般特征.设计规则 (LIFTING APPLIANCES AND MACHINES. LIFTING BEAMS. GENERAL CHARACTERISTICS. SAFETY REQUIREMENTS.)
NF T54-503-1976 塑料.轻塑料制品.拉力性能的测定 (LIGHT PLASTICS PRODUCTS. DETERMINATION OF TENSILE PROPERTIES.)
NF P15-201-1-1993 DTU 26-1.建筑工程.水泥砂浆、石灰砂浆、混合石膏及熟石灰砂浆制成的石膏制品.第1部分:技术规范 (DTU 26-1. BUILDING WORKS. PLASTERWORKS MADE FROM CEMENT MORTARS, LIME MORTARS, MIXED GYPSUM AND SLAKED LIME MORTARS. PART 1 : TECHNICAL SPECIFICATIONS.)
NF T60-198-1994 润滑油.基本生物降解性的评定.红外光谱法 (LUBRICANTS. EVALUATION OF PRIMARY BIODEGRADABILITY. METHOD BY INFRARED SPECTROSCOPY.)
NF T90-015-1-2000 水质.铵的测定.第1部分:柱状蒸汽蒸馏滴定法 (Water quality - Determination of ammonium - Part 1 : post steam distillation titrimetric method.)
NF C74-0112-1993 NF C74-011-91的修改件1 ()
NF T76-302-1983 粘合剂.乳胶(水扩散型).特性方法一览表 (EMULSION ADHESIVES (AQUEOUS DISPERSIONS). LISTS OF CHARACTERIZATION METHODS.)
NF H34-056-2000 包装.柔性铝管.内喷漆膜测量方法 (Packaging - Flexibles aluminium tubes - Internal lacquer film measurement method.)
NF D18-202-1984 卫生阀门.缓冲器.一般技术规范 (SANITARY TAPWARE. MECHANICAL MIXERS. GENERAL TECHNICAL SPECIFICATIONS.)
NF L14-201-1994 航空航天系列.铝AL-P1050A.H14.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 (AEROSPACE SERIES. ALUMINIUM AL-P1050A. H14. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2072).)
NF P98-632-1991 横路标.公路上使用的标记.用原子吸收光谱法分析从白色涂料产品中提取的粉末材料 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF MINERAL POWDER EXTRACTED FROM WHITE MARKING PRODUCTS BY ATOMIC ABSORPTION SPECTROMETRY.)
NF V08-030-1998 食品和动物饲料的微生物学.中温乳酸菌的横向计算法.30℃时的菌落计数技术 (MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS. HORIZONTAL METHOD FOR THE ENUMERATION OF MESOPHILIC LACTIC ACID BACTERIA. COLONY-COUNT TECHNIQUE AT 30 DEGREES CELSIUS.)
NF L46-210-1989 航空和航天.流体装置用环形压板的制造尺寸 (AEROSPACE. “P“ CLAMPS (LOOP CLAMPS) FOR FLUID SYSTEMS. ENVELOPE DIMENSIONS.)
NF T60-611-1-2000 石油和相关产品.耐火液体喷射点燃特性的测定.第1部分:喷射火焰持久性.空心喷射器法 (Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1 : spray flame persistence - Hollow-cone nozzle method.)
NF E62-213-1976 机床构造标准部件.多轴头.光滑端面钻床传动轴 (UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN PLAIN AND DRILLING SPINDLES.)
NF C52-1231-1980 C52-123-68的补充1 ()
NF X45-306-2000 过滤盒.试验方法.洁净性的验证 (Filter cartridges - Test methods - Verification of the cleanliness.)
NF P33-401-2001 纤维水泥平板.产品规范和试验方法 (Fibre-cement flat sheets - Product specifications and test methods.)
NF E62-333-1992 机床.可互换标准件.工件用标准夹紧和安装设备.定位保持零件 (MACHINE TOOLS. MODULAR UNITS. MODULAR CLAMPING AND MOUNTING DEVICE FOR PIECE. POSITION HOLDING COMPONENTS.)
NF T76-303-1983 粘合剂.有机溶剂粘合剂特性方法一览表? (ORGANIC SOLVENT ADHESIVES. LISTS OF CHARACTERIZATION METHODS.)
NF L10-309-1997 航空和航天系列硫酸铬中铝和铝合金的酸洗 (AEROSPACE SERIES. CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS. (EUROPEAN STANDARD EN 2334).)
NF T72-321-1977 家用灭蝇剂.耐久杀虫剂扩散器.均匀指数和效果指数的测定 (INSECTICIDES FOR FLYING INSECTS. PERMANENT INSECTICIDE DISTRIBUTOR. DETERMINATION OF THE EFFICIENCY RATING AND THE REGULARITY RATING.)
NF C52-108-1969 变压器.带两个触头的测定放出气体的防护装置.特性及制造规则 (TRANSFORMERS TWO-CONTACT GAS-ACTUATED PROTECTIVE DEVICES. CHARACTERISTICS AND CONSTRUCTIONAL REQUIREMENTS.)
NF A09-223-1985 无损检验.工业放射学.使用带氟化金属荧光板的射线片子的鉴定卡 (NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. IDENTIFICATION CARD FOR RADIOGRAPHIC FILM USED WITH FLUOROMETALLIC FLUORESCENT INTENSIFIER SCREENS.)
NF C20-714-2000 环境试验.第2部分:试验.试验N:温度变化 (Environmental testing - Part 2 : tests - Test N : change of temperature.)
NF F56-001-1985 铁路固定设备.F 56通讯和信号装置架空线路用器材铁路固定设备.通信和信号装置架空线路用器材.定位牌和锚 (FIXED RAILWAY EQUIPMENT. MATERIAL FOR TELECOMMUNICATION AND SIGNALLING OVERHEAD LINES. KEYING-PLATE AND ANCHOR-PLATE.)
NF F50-402-1977 铁路固定设备.标准铁轨.新式轨距线路的铺设.轨距 (FIXED RAILWAY EQUIPMENT. STANDARD-GAUGE LINE. LAYING OF NEW TRACK GAUGES.)
NF C93-903-17-2000 光纤互联装置和无源部件.基本试验和测量步骤.第3-17部分:检查和测量.抛光套圈角的端面角 (Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17 : examinations and measurements - Endface angle of angle-polished ferrules.)
NF F56-352-1980 铁路固定设备.通讯和信号装置架空线路用器材.立式双托架 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. DOUBLE VERTICAL BRACKETS.)
NF P98-712-1993 道路建造和维修设备.翻新过程土壤稳定性:PULVI-混合料粘合剂上浆机.术语 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPEMENT. SOILS STABILIZATION OR RETREAD PROCESS : SPREADER PLANTS OF BINDER A PULVI-MIXER. TERMINOLOGY.)
NF S91-179-2000 牙科镊子.第2部分:Meriam型 (Dental tweezers - Part 2 : Meriam types.)
NF P21-203-1-1993 建筑工程.木材结构框架及楼梯.第1部分:技术规范 (DTU 31-1. BUILDING WORKS. TIMBER FRAMEWORKS AND STAIRS. PART 1 : TECHNICAL SPECIFICATIONS.)
NF C93-7691-1996 NF C93-769-94补充件1和2 ()
NF X15-113-1997 空气湿度的测量.阻抗变化比重计(容性的和抵抗性的) (MEASUREMENT OF AIR HUMIDITY. IMPEDANCE VARIATION HYGROMETER (CAPACITIVE AND RESISTIVE).)
NF G07-062-1980 纺织.纤维试验.棉花,羊毛和化学纤维的物理试验用取样方法 (TEXTILES. TESTS FOR FIBRES. METHODS OF SAMPLING FOR TESTING FOR COTTON,WOOL OR CHEMICAL FIBRES.)
NF S11-611-2000 眼科光学.接触透镜的光纤和尺寸特性及材料规范.第2部分:单一视觉水凝胶接触透镜 (Ophtalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 2 : single-vision hydrogel contact lenses.)
NF P25-201-2-1993 建筑工程.私人合同.外露单元建筑用百叶窗.第2部分:特别条款 (DTU 34-1. BUILDING WORKS. PRIVATE CONTRACTS. SHUTTERS FOR OPEN BAYS. PART 2 : SPECIAL CLAUSES.)
NF P38-511-1969 屋顶.无色板透明度测定 (ROOFING. PLASTIC. MEASUREMENT OF TRANSLUCENCY OF COLOURLESS SHEETS.)
NF T20-417-1975 工业碳酸钠.硫酸盐含量的测定.硫酸钡重量法 (SODIUM CARBONATE FOR INDUSTRIAL USE. DETERMINATION OF SULPHATE CONTENT. BARIUM SULPHATE GRAVIMETRIC METHOD.)
NF E11-150-1-2001 几何产品规范(GPS).坐标测量机械(CMM)的验收和再验证实验.第1部分:词汇 (Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1 : vocabulary.)
NF R13-106-1953 圆柱轴端 (CYLINDRICAL SHAFT ENDS.)
NF T60-365-1980 工业甘油.硫酸灰分的测定.重力法 (GLYCERINES FOR INDUSTRIAL USE. DETERMINATION OF SULPHATED ASH CONTENTS. GRAVIMETRIC METHOD.)
NF C71-120-1970 电灯和照明设备的测光用推荐方法 (LIGHTING FITTINGS RECOMMENDED METHODS FOR PHOTOMETRY OF LAMPS AND LIGHTING FITTINGS)
NF T45-019-1983 橡胶工业原料.石腊 (RAWMATERIALS FOR THE RUBBER INDUSTRY. PARAFFINS.)
NF T60-213-1968 动物脂肪和植物脂肪.氢氧化合物值的测定 (ANIMAL AND VEGETABLE FATS AND OIL. DETERMINATION OF HYDROXYL VALUE.)
NF H44-038-1986 烟雾剂发生器.金属容器.20mm瓶口铝制容器尺寸 (AEROSOLS DISPENSERS. METAL CONTAINERS. DIMENSIONS OF ALUMINIUM MONOBLOC CONTAINERS WITH FINISH 20 MM.)
NF X06-064-1988 统计学应用.平均值和方差值试验的效应? (APPLICATION OF STATISTICS. EFFICIENCY OF TEST RELATING TO MEANS AND VARIANCES.)
NF T73-276-1983 表面活性剂.洗涤剂.非离子表面活性剂.生物降解性的测定.参考法 (SURFACE ACTIVE AGENTS. DETERGENTS-NON-IONIC SURFACE ACTIVE AGENT. DETERMINATION OF BIODEGRADABILITY. REFERENCE METHOD.)
NF P68-203-2-1993 DTU 58-1. 施工.吊顶.第2部分:特别条款说明书 (DTU 58-1. EXECUTION OF WORK. SUSPENDED CEILINGS. PART 2 : SPECIAL CLAUSES BOOK.)
NF P26-411M-1970 五金.有色金属把手和附件.特性 ()
NF E25-160-1992 平端开槽调整螺钉 (SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)
NF G62-409-2000 鞋.鞋帮衬里和鞋垫的试验方法.耐排汗性 (Footwear - Test methods for insoles, lining and insocks - Perspiration resistance.)
NF U62-050-1983 葡萄抽吸机.试验方法 (GRAPE PUMPS. TEST METHODS.)
NF F05-600-1990 铁路固定设备.预制钢筋水泥灌注件通用要求 (FIXED RAILWAY EQUIPMENT. COMMON REQUIREMENT OF PREFABRICATED CASTING,MADE OF REINFORCED CONCRETE.)
NF C32-073-2-2000 燃烧时电缆的通用试验方法.在规定条件下电缆燃烧时烟密度的测量.第2部分:试验程序 (Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2 : procedure.)
NF C93-547-1-2000 液晶和固态显示器件.第1部分:总规范 (Liquid crystal and solid-state display devices - Part 1 : generic specification.)
NF T51-440-2000 塑料.酚醛树脂.分类和试验方法 (Plastics - Phenolic resins - Classification and test methods.)
NF L22-591-2000 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a)
NF P98-736-1992 道路建造和维修设备.合同.规范 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. COMPACTORS. CLASSIFICATION.)
NF B35-796-2-2000 实验室玻璃器皿.瓶.第2部分:锥形颈瓶 (Laboratory glassware - Bottles - Part 2 : conical neck bottles.)
NF X50-840-1995 旅行修理机构.轻型车辆的旅行修理.服务规范 (REPAIR-TOURING ACTIVITY. REPAIR-TOURING OF LIGHTWEIGHT VEHICLES. SERVICE SPECIFICATIONS.)
NF Z62-021-1984 信息处理.文本传递用编码字符组.第1部分:一般介绍 (INFORMATION PROCESSING. CODED CHARACTER SETS FOR TEXT COMMUNICATION. PART 1 : GENERAL INTRODUCTION.)
NF P14-201-2-1993 建筑工程.私人合同.水硬性粘合料基的样板及板块.第2部分:特别条款 (DTU 26-2. BUILDING WORKS. PRIVATE CONTRACTS. SCREEDS AND SLABS WITH A BASE OF HYDRAULIC BINDERS. PART 2 : SPECIAL CLAUSES.)
NF L22-187-1976 有BNAE十字槽锥顶90°埋头螺钉.国际单位米制螺纹 (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF F70-041-1992 铁路固定设备.铁路轨线 (RAILWAY FIXED EQUIPMENT. TRACK CIRCUITS.)
NF C93-721-1980 电子元件.印制电路裸印板的制备 (ELECTRONIC COMPONENTS. PRINTED WIRING. REWORK OF PRINTED BOARDS.)
NF Q34-021-2000 卫生和家庭用品.婴儿卫生用品:纸尿裤及类似一次性产品.按压扣件:纵向拉伸强度的测定 (Sanitary and domestic articles - Infantile hygiene articles : all-in-one nappies and similar disposable products - Press fasteners : determination of the longitudinal tensile strength.)
NF L21-212-1980 铝合金制平头铆钉(英寸) (PAN HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF C93-022-1971 电子元件.点至点接线夹 (COMPONENTS FOR ELECTRONIC EQUIPMENT. POINT TO POINT CLIP TERMINAL.)
NF Q50-004-1966 纸浆.制浆溶液中硫酸钠含量的测定 (PULPS FOR PAPER. QUANTITY DETERMINATION OF SODIUM SULPHIDE IN PULP LIQUORS FOR PAPERMAKING.)
NF U66-069-1985 农业食品工业设备.自动供料有水平转动轴的切肉和剁肉机.综合安全装置 (FOOD PRODUCTION EQUIPMENT. SELF FED MACHINES FOR CHOP. SLICING WITH HORIZONTAL AXIS. SAFETY DEVICES INTEGRATED.)
NF L22-142-1984 常用有销孔六角头螺钉 (BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)
NF S72-509-3-2000 防护头盔.试验方法.第3部分:抗穿透性 (Protective helmets - Test methods - Part 3 : resistance to penetration.)
NF G62-312-2000 鞋.外鞋帮的试验方法.压缩能量 (Footwear - Test methods for outsoles - Compression energy.)
NF B42-008-1997 高技术陶瓷.陶瓷粉末的试验方法.第8部分:振实堆积密度的测定 (ADVANCED TECHNICAL CERAMICS. METHODS OF TEST FOR CERAMIC POWDERS. PART 8 : DETERMINATION OF TAPPED BULK DENSITY. (EUROPEAN STANDARD EN 725-8).)
NF C20-751-2000 环境试验.第2部分:试验 Z/BFc:热扩散样品和非热扩散样品的干热/振动(正弦)试验 (Environmental testing - Part 2 : tests - Tests Z/BFc : combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens.)
NF P97-405-2000 灯柱.第3-1部分:设计和检验.特性负荷规范 (Lighting columns - Part 3-1 : design and verification - Specification for characteristic loads.)
NF C97-4301-1980 NF C97-430 77年5月的补充件1.等同件80年10月25日 ()
NF T54-063-1989 塑料.自来水网用的聚乙烯管子.规范和试验方法 (PLASTICS. POLYETHYLENE PIPES FOR DRINKING WATER SUPPLY NETWORKS. SPECIFICATIONS AND TEST METHODS.)
NF P31-202-1-1997 DTU 40.21.建筑工程.滑动的或有槽的陶土瓦制屋顶覆盖物.第1部分:技术规范 (DTU 40.21. BUILDING WORKS. ROOF COVERING MADE OF SLIPPING OR GROOVED CLAY TILES. PART 1 : TECHNICAL SPECIFICATIONS.)
NF Z66-436-1996 信息技术.国际协议标准TAnnnn.无连接中继服务上的连接定向传送服务.第6部分:TA54类型定义,FDDI LAN子网络上 (INFORMATION TECHNOLOGY. INTERNATIONAL STANDARDIZED PROFILE TANNN. CONNECTION-MODE TRANSPORT SERVICE OVER CONNECTIONSLESS-MODE NETWORK SERVICE. PART 6 : DEFINITION OF PROFILE TA54, OPERATION OVER AN FDDI LAN SUBNETWORK. (EUROPEAN STANDARD EN ISP 10608-6).
NF P07-002-1949 特定尺寸.卡车和火车车厢装卸月台高度? (SPECIAL DIMENSIONS. HEIGHT OF LOADING PLATFORMS FOR LORRIES AND WAGONS.)
NF P98-450-2000 道路设备.道路反光系统.第1部分:性能和特性 (Road equipment - Anti-glare systems for roads - Part 1 : performances and characteristics.)
NF C46-519-2001 工业过程控制阀.第8部分:噪声考虑.第1节:实验室测量气动流经控制阀产生的噪声 (Industrial-process control valves - Part 8 : noise considerations - Section 1 : laboratory measurement of noise generated by aerodynamic flow through control valves.)
NF P98-629-1991 路面横标记.道路上的使用的标记.环氧化合物.碱度和异氰酸盐指数的测定 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. EPOXIDE,BASICITY AND ISOCYANATE INDEXES DETERMINATION.)
NF E66-211-1977 圆柱柄两面刃圆柱形铣刀.标准系列和长系列 (END MILLS WITH PARALLEL SHANKS. STANDARD SERIES AND LONG SERIES.)
NF P78-405-2000 建筑玻璃.安全玻璃.抗子弹冲击的试验和分类 (Glass in building - Security glazing - Testing and classification of resistance against bullet attack.)
NF C66-042-2000 额定电压大于1000V的架空线用复合绝缘子串组合件.第2部分:尺寸与电气特性 (Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 2 : dimensional and electrical characteristics.)
NF A09-311-2000 无损检验.超声检验.1号校准块规范 (Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1.)
NF L09-001-1976 航空设备的识别.标准写法 (IDENTIFICATION OF AEROSPACE COMPONENTS. METHOD OF WRITING PART NUMBERS.)
NF P75-305-1987 建筑物绝热材料.刚性和半刚性绝热材料水排斥性能的常规测定 (MANUFACTURED THERMAL INSULATING MATERIALS FOR BUILDING PURPOSES. CONVENTIONAL DETERMINATION OF THE WATER REPELLENCY NATURE OF THE RIGID AND SEMI-RIGID INSULATING MATERIALS.)
NF T73-265-1983 表面活性剂.洗涤剂.阴离子表面活性剂.生物降解性的测定(参考法) (SURFACE ACTIVE AGENTS. DETERGENTS. ANIONIC SURFACE ACTIVE AGENTS. DETERMINATION OF BIODEGRADABILITY. REFERENCE METHOD.)
NF T52-131-1988 塑料.聚氨基甲酸酯塑料.异氰酸盐密度的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. DETERMINATION OF THE DENSITY OF ISOCYANATES.)
NF P95-305-1992 防雪崩设备.防雪栅栏.设计规范 (PROTECTION EQUIPMENT AGAINST AVALANCHES. SNOW FENCE. DESIGN SPECIFICATIONS.)
NF F01-310-1990 铁路车辆.订货时,厂家及其供货者之间提供技术的规定 (RAILWAY ROLLING STOCK. DELIMITATION OF TECHNICAL ALLOWANCES BETWEEN THE CONSTRUCTORS AND THEIR SUPPLIERS FOR THE EXECUTION OF AN ORDER.)
NF C52-152M1-1970 变压器.带凸缘的滑轮支架叉形接头和锁定装置 (TRANSFORMERS DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.)
NF E22-362-3-1998 球面滑动轴承.第3部分:止推球面滑动轴承 (SPHERICAL PLAIN BEARINGS. PART 3 : THRUST SPHERICAL PLAIN BEARINGS.)
NF M88-768-1980 液化烃容器装置.气态物质用接头软管 (INSTALLATIONS FOR LIQUEFIED HYDROCARBONS IN CONTAINERS. FLEXIBLE COUPLINGS FOR GAS PHASE.)
NF L44-512-1973 低压接头.ISO 米制螺纹剖面和BNAE公差? (AIRCRAFT GROUND SUPPLY. LOW PRESSURE CONNECTION. ISO METRIC THREAD PROFILE AND B.N.A.E. TOLERANCES. (RECH.).)
NF T56-1231-1997 NF T56-123-1974的补充件1 ()
NF R14-316-1959 反射镜.两点固定 (REFLECTORS. TWO POINT ATTACHMENT.)
NF Z66-804-3-1996 信息技术.国际标准化界面RA.无连接中继服务用继电器.第3部分:与CSMA/CD型局域部分网相关并且与媒体相关的要 (INFORMATION TECHNOLOGY. INTERNATIONAL STANDARDIZED PROFIL RA. RELAYING THE CONNECTIONLESS-MODE NETWORK SERVICE. PART 3 : CSMA/CD LAN SUBNETWORK-DEPENDENT, MEDIA-DEPENDENT REQUIREMENTS. (EUROPEAN STANDARD EN ISP 10613-3).)
NF P31-203-11-1999 1996年NF P 31-203-1的补充件1 ()
NF C93-323-1982 电子元件.电感元件和磁回路.变压器壶形铁芯磁回路.一般规定 (COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC CORES AND ACCESSORIES. POTS CORES MADE OF FERRO-MAGNETIC OXIDES FOR TRANSFORMERS. GENERAL REQUIREMENTS.)
NF P18-502-1992 混凝土添加剂.硅雾 (ADDITIONS FOR CONCRETE. SILICA FUMES.)
NF M60-305-1999 核能.核燃料技术废物.用核辐射转化的非损测量对核辐射的评估 (NUCLEAR ENERGY. NUCLEAR FUEL TECHNOLOGY-WASTE. ASSESSMENT OF RADIONUCLIDES BY NON DESTRUCTIVE MEASUREMENT OF RADIONUCLIDE TRAVERS.)
NF F80-153-1986 通用铁路设备.扁平产品的冷弯半径.铝和铝合金板和带喷漆产品的最小弯曲半径 (RAILWAY EQUIPMENT. COLD FOLDING RADII FOR PLAT PRODUCTS. MINIMUM FOLDING RADII FOR LAQUERED SHEETS OR BANDS MADE OF ALUMINIUM AND ALUMINIUM ALLOYS.)
NF C04-730-1968 洗衣机的标志.标定容量 (LABELLING OF LAUNDRY WASHING MACHINES. NOMINAL CAPACITY.)
NF T90-364-1998 防水和防地面碳化氢污染的制品.洗石制品清洁能力的测定.试验方法 (PRODUCTS AGAINST WATER AND GROUND POLLUTION BY HYDROCARBONS. DETERMINATION OF THE CLEANING POWER OF ROCK WASHING PRODUCT. TEST METHOD.)
NF P15-308-1964 水硬性粘合料.天然水泥CN (HYDRAULIC BINDERS. NATURAL CEMENTS.)
NF K12-404-1996 有价证券.互存储证券类型图 (SECURITIES. SCHEME FOR INTERDEPOSITORY MESSAGE TYPES.)
NF L65-122-1974 弹性装配小件 (COMPACT SIZE FLEXIBLY MOUNTED CASES.)
NF C31-671-2001 特种绕组线规范.第21部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,155级 (Specifications for particular types of winding wires - Part 21 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155.)
NF T81-101-1975 液态化学制品和带16型旋转同步额定压力的烃类对称半接头(吉尔曼体系)(GUILLEMIN)的运输和装卸 (TRANSPORT AND HANDLING OF LIQUID CHEMICAL PRODUCTS AND HYDROCARBONS-HALF SYMETRIC COUPLING(GUILLEMIN SYSTEM)WITH ROTATING LOCK-NOMINALPRESSURE 16.)
NF C86-0101-1988 C 86-010-81的补充1 ()
NF C60-430/A1-2000 小型熔断器.第1部分:小型熔断器的定义和小型熔丝链的一般要求 (Miniature fuses - Part 1 : definitions for miniature fuses and general requirements for miniature fuse-links.)
NF T56-1301-1997 NF T56-130-1984的补充件1 ()
NF L22-575-2000 航空用螺栓和螺母.双耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t)
NF E62-187-1983 拉削用的四个锁销的尾挂钩头.第5部分:直径45到50的主轴用挂钩头尺寸和特征 (PULLER WITH 4 CLAMPS FOR INTERNAL PULL-TYPE BROACHING. PART 5 : DIMENSIONS AND CHARACTERISTICS OF PULLERS FOR BROACHES OF DIAMETERS 45 TO 50.)
NF S90-426-1988 外科医疗器械.外科植入物.不锈钢粗糙面骨干板.尺寸和表面特性 (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. ROUGH SURFACE DIAPHYSIS PLATES MADE OF STAINLESS STEEL. DIMENSIONAL AND SURFACE CHARACTERISTICS.)
NF T51-052-1988 塑料.聚合物和共聚物的水扩散.pH值的测定 (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DETERMINATION OF PH.)
NF Q03-030-1968 纸张和纸板试验.瓦楞纸板.厚度测定 (PAPER AND BOARD TESTS. CORRUGATED BOARD. DETERMINATION OF THICKNESS.)
NF C31-510-1976 开关板及电气接线用扁平铜条 (FLAT COPPER BARS FOR SWITCHBOARDS AND ELECTRICAL WIRINGS (WITH SHARP OR ROUNDED EDGES).)
NF Q03-037-1969 纸张和纸板试验.暴露在光源下照射法加速老化.抗老化性能测定 (PAPER AND BOARD TESTS. ACCELERATED AGEING BY EXPOSURE TO RADIATION FROM A LIGHT SOURCE. DETERMINATION OF AGEING RESISTANCE.)
NF C93-722-1980 电子元件.印制电路.组装印制电路板的制备.一般条件 (ELECTRONIC COMPONENTS. PRINTED WIRING. REWORK OF PRINTED BOARDS ASSEMBLIES.)
NF E25-161-1992 锥端开槽调整螺钉 (SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)
NF A35-565-1994 钢铁.轴承钢.类型 (IRON AND STEEL. BEARING STEELS. TYPES.)
NF U47-100-2001 动物健康分析方法.动物制品部门中沙门菌的隔绝和识别或特殊血清型的研究 (Animal health analysis methods - Isolation and identification of Salmonella or search for particular serovar(s) in the animal production sector.)
NF A09-460-1998 无损检验.渗漏试验.度谱仪渗漏检测特性 (NON-DESTRUCTIVE TESTING. LEAK TESTING. CHARACTERIZATION OF MASS SPECTROMETER LEAK DETECTORS. (EUROPEAN STANDARD EN 1518).)
NF C63-1101-1995 NF C63-110 93年2月的补充件1 ()
NF D64-301-1945 木制床架 (FURNITURE. WOODEN MATTRESS FRAMES.)
NF P94-112-1991 土壤.勘测和试验.现场测震试验 (SOILS INVESTIGATION AND TESTING. VANE TEST.)
NF P98-107-1991 路面层.玻璃状炉渣的活性.定义、特性和规范 (ROAD FOUNDATIONS. ACTIVATION OF VITRIFIED SLAG. DEFINITIONS,CHARACTERISTICS AND SPECIFICATIONS.)
NF T72-320-1977 家用灭蝇剂.压力散布杀虫剂(烟雾型).效果指数的测定 (INSECTICIDES FOR FLYING INSECTS. INSECTICIDE DISTRIBUTED UNDER PRESSURE (“AEROSOL“ TYPE). DETERMINATION OF THE EFFICIENCY RATING.)
NF G07-071-4-1990 纺织.印染牢度试验.第A04部分:在高湿环境中耐氧化氮色牢度 (TEXTILES. TESTS FOR COLOUR FASTNESS. PART G04 : COLOUR FASTNESS TO OXIDES OF NITROGEN IN THE ATMOSPHERE AT HIGH HUMIDITES.)
NF C72-400-2000 家用电灯的能效率.测量方法 (Energy efficiency of electric lamps for household use - Measurement methods.)
NF L10-111-1995 航空航天系列.经过喷丸硬化的金属涂层的粘结试验 (AEROSPACE SERIES. ADHESION TEST FOR METALLIC COATINGS BY SHOT PEENING. (EUROPEAN STANDARD EN 2829).)
NF Z68-110-4-1994 工业自动化系统.制造信息规范.第4部分:数据控制参考标准(EN 29506-4) (INDUSTRIAL AUTOMATION SYSTEMS. MANUFACTURING MESSAGE SPECIFICATION. PART 4 : COMPANION STANDARD FOR NUMERICAL CONTROL. (EUROPEAN STANDARD EN 29506-4).)
NF E52-300-1978 轻便机车上安装的安全装置.特征和检验? (DEAD MAN`S DEVICES FOR LOCOTRACTOR. SPECIFICATIONS AND CHECKINGS.)
NF C18-426/A1-2003 交流设备上带电作业用硬质保护罩 (Rigid protective covers for live working on a.c. installations.)
NF X10-022-1983 通过保温盒法在实验室进行建筑物隔墙热传导系数的测定 (DETERMINATION IN LABORATORY OF THERMAL TRANSMISSION COEFFICIENTS OF CONSTITUTIVE PARTITION WALL BY METHOD OF HOT GUARDED BOX.)
NF H44-016-1988 烟雾发生器.压力分配容器(气雾剂容器型).铝制20mm容器瓶口尺寸 (AEROSOL DISPENSERS. ALUMINIUM MONOBLOC CONTAINERS. DIMENSIONS OF THE 20 MM FINISH.)
NF S74-515-1995 防护服.防护液体化学药品腐蚀.为人体各部分提供化学防护的服装的性能要求 (PROTECTIVE CLOTHING. PROTECTION AGAINST LIQUID CHEMICALS. PERFORMANCE REQUIREMENTS FOR GARMENTS PROVIDING CHEMICAL PROTECTION TO PARTS OF THE BODY. (EUROPEAN STANDARD EN 467).)
NF A04-112-1980 钢铁产品.沸腾钢线材化学杂质成分的描述及使其显示的显微照相法 (IRON AND STEEL. MACROGRAPHIC METHOD OF SHOWING AND DESCRIBING THE CHEMICAL HETEROGENEITY OF EFFERVESCENT STEEL WIRE ROD.)
NF T54-505-1976 塑料.轻塑料制品.抗冲击强度试验 (LIGHT PLASTICS PRODUCTS. IMPACT RESISTANCE TEST.)
NF C97-4051-1980 NF C97-405 77年2月补充件1.等同件80年5月21日 ()
NF Z66-803-1-1996 信息技术.国际标准界面RD.使用透明桥接器的MAC中继服务.第1部分:独立子网要求 (INFORMATION TECHNOLOGY. INTERNATIONAL STANDARDIZED PROFILE RD. RELAYING THE MAC SERVICE USING TRANSPARENT BRIDGING. PART 1 : SUBNETWORK-INDEPENDENT REQUIREMENTS. (EUROPEAN STANDARD EN ISP 10612-1).)
NF E74-326-1995 火花和点火塞用长套管型套筒扳手 (SOCKET WRENCHES FOR SPARK- AND GLOW-PLUGS.)
NF T51-352-1999 塑料.未增塑的醋酸纤维素.游离酸度的测定 (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF FREE ACIDITY. (EUROPEAN STANDARD EN ISO 1061).)
NF S11-691-1999 眼科光学.接触透镜.水凝胶透镜水含量的测定 (OPHTHALMIC OPTICS. CONTACT LENSES. DETERMINATION OF WATER CONTENT OF HYDROGEL LENSES. (EUROPEAN STANDARD EN ISO 10339).)
NF L14-402-1993 航空航天系列.铝合金AL-P2014A,T4511.200mm以上或等于200mm的挤压棒材和型材 (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P2014A - T4511. EXTRUDED BARS AND SECTIONS A OR D SUPERIOR OR EQUAL TO 200 MM. (EUROPEAN STANDARD EN 2100).)
NF M07-020-2-2000 原油产品.水和沉淀物的测定.离心法 (Crude petroleum - Determination of water and sediment - Centrifuge method.)
NF G07-178-4-1999 织物.Martinadale法对纤维磨损抗性的测定.第4部分:表面变化的评估 (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 4 : ASSESSMENT OF APPEARANCE CHANGE. (EUROPEAN STANDARD EN ISO 12947-4).)
NF Z64-705-1984 信息处理.在200mm(8in)软磁盘上利用修正的频率调制以13,262ftprad录制在两面上的信息交 (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGE USING MODIFIED FREQUENCY MODULATION RECORDING AT 13262 FTPRAD ON TWO SIDES. DIMENSIONAL,PHYSICAL AND MAGNETIC CHARACTERISTICS.)
NF E04-012-3-1996 技术制图.螺钉和螺纹部件.第3部分:简化表示 (TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 6410-3).)
NF U15-1351-1997 NF U15-135-97补充件1 ()
NF B54-000-1974 木材.大块木材制拼花地板条.制造特性 (TIMBER. SOLID WOOD FLOORING STRIPS. MANUFACTURING CHARACTERISTICS.)
NF F55-0531-1978 铁路固定设备.钢筋混凝土轮型槽盖.补充件1 ()
NF C47-7451-1998 1995年NF C 47-745的补充件1 ()
NF C63-1601-1995 NF C63-160 93年2月的补充件1 ()
NF F56-359-1980 铁路固定装置.通讯和信号装置架空线路用器材.木电杆固定托架用半圆卡箍 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. HALF COLLARS FOR FIXING BRACKETS TO WOODEN POLES.)
NF R93-183-1980 电阻电焊钢螺钉、螺栓和螺母机械特性 (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
NF C61-112-2000 家用和类似用途的固定电气设备开关.第2-2部分:特殊要求.电磁摇控开关 (Switches for household and similar fixed-electrical installations - Part 2-2 : particular requirements - Section 2 : electromagnetic remote-control switches (RCS).)
NF P67-103-1-1993 DTU 57-1. 高架地板(自由出入).组成部件.第1部分:技术条款规范 (DTU 57-1. RAISED ACCESS FLOOR (FREE ACCESS). CONSTITUANT COMPONENTS. EXECUTION. PART 1 : SPECIFICATION FOR TECHNICAL CLAUSES.)
NF C63-1102-1997 1993年NF C 63-110的补充件2 ()
NF S75-508-3-2000 防护服.避免用手刀砍伤或戳伤用的手套和臂膀防护物品.第3部分:织物、皮革和其它材料制手套和臂膀防护物品的 (Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3 : impact cut test for fabric, leather and other materials.)
NF L14-215-1994 航空航天系列.铝合金AL-P6061-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P6061-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2694).)
NF B40-104-1977 耐火制品.炼钢厂和铸造厂浇包用砖的尺寸 (REFRACTORY PRODUCTS. DIMENSIONS OF LADLE BRICKS FOR STEELWORKS AND FOUNDRIES.)
NF L22-188-1976 有BNAE十字槽锥顶120°埋头半圆头螺钉单国际单位制米螺纹 (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF P98-106-1991 路面层.高炉矿渣.定义、特性和规范 (ROAD FOUNDATIONS. BLAST FURNACE (GRANULATED OR PELLETIZED) VITRIFIED SLAG. DEFINITIONS,CHARACTERISTICS AND SPECIFICATIONS.)
NF C45-251-1983 继电器.一般用继电器.第1部分:瞬时(不规定时间)“与或非“继电器 (ELECTRICAL RELAYS. GENERAL PURPOSE RELAYS. PART 1 : ALL-OR-NOTING RELAYS WITH NON-SPECIFIED TIME. QUALIFICATION STANDARD.)
NF B53-601-1-1995 圆木和锯木.术语.第1部分:圆木和锯材通用一般术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 1 : GENERAL TERMS COMMON TO ROUND TIMBER AND SAWN TIMBER. (EUROPEAN STANDARD EN 844-1).)
NF F52-163-1995 铁路固定设备.指示和行人穿越道的锁定.带有钻石滑动开关的行人穿越道指示行车的锁定 (RAILWAY FIXED EQUIPMENT. LOCKING OF POINTS AND CROSSING. LOCKING DEPENDENT OF DRIVING OF POINTS CROSSING WITH SLIDING SWITCH DIAMOND.)
NF G07-178-3-1999 织物.Martinadale法对纤维磨损抗性的测定.第3部分:重量损失的测定 (TEXTILES. DETERMINATION OF THE ABRASION RESISTANCE OF FABRICS BY THE MARTINDALE METHOD. PART 3 : DETERMINATION OF MASS LOSS. (EUROPEAN STANDARD EN ISO 12947-3).)
NF G43-504-1987 纺织工业设备及辅助装置.织机.伸幅器的滚筒 (TEXTILE AND ALLIED MACHINERY AND ACCESSORIES. WEAVING MACHINES. TEMPLE CYLINDERS.)
NF V03-751-1985 高梁.丹宁酸含量 (SORGHUM. DETERMINATION OF TANNIN CONTENT.)
NF B10-622-2000 天然石的试验方法.岩相检验 (Natural stone test methods - Petrographic examination.)
NF V76-107-1980 水果和蔬菜汁.维生素C和脱氢维生素C含量的测定.荧光测定法 (FRUIT AND VEGETABLE JUICES. DETERMINATION OF ASCORBIC AND DEHYDROASCORBIC ACID CONTENT. FLUORIMETRY METHOD.)
NF C03-255-1-2001 技术信息和文献的结构安排 (Structuring of technical information and documentation.)
NF E52-600-1983 材料升降机.工地的.术语 (BUILDING HOISTS. TERMINOLOGY.)
NF U02-010-1987 农林用拖拉机和器材.保证安全的技术装置.第10部分:播种.种植和施肥器材 (AGRICULTURAL AND FORESTRY TRACTORS AND MACHINERY. TECHNICAL MEANS FOR PROVIDING SAFETY. PART 10 : EQUIPMENT FOR SOWING,PLANTING AND DISTRIBUTING FERTILIZERS.)
NF A47-410-1983 冶金产品.各种钢号的易切削钢棒.斜切和磨快 (STEEL BARS,ALL GRADES,FOR FREE CUTTING,CHAMFERING AND POINTING.)
NF X43-007-1973 大气污染.用“沉淀片”法测定沉降物 (MEASUREMENT OF ATMOSPHERIC FALL-OUT BY MEANS OF METAL PLAQUETTES.)
NF C93-711-1-2-2000 印制板和印制板组件.设计和使用.第1-2部分:一般要求.受控阻抗 (Printed boards and printed board assemblies - Design and use - Part 1-2 : generic requirements - Controlled impedance.)
NF C93-711-1-2-2000 印制板和印制板组件.设计和使用.第1-2部分:一般要求.受控阻抗 (Printed boards and printed board assemblies - Design and use - Part 1-2 : generic requirements - Controlled impedance.)
NF P20-605-2000 门扉.总体和局部平整度.公差级 (Door leaves - General and local flatness - Tolerance classes.)
NF C93-324-1982 电子元件.电感元件和磁回路.电感线圈壶形铁芯的磁回路.一般规定 (COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC CORES AND ACCESSORIES. POTS CORES MAYE OF FERRO MAGNETIC OXIDES FOR INDUCTORS. GENERAL REQUIREMENTS.)
NF C74-302-1964 医用电气设备.直流低频或中频设备 (ELECTROMEDICAL EQUIPMENT. GALVANIC CURRENT OR LOW-MEDIUM-FREQUENCY EQUIPMENT.)
NF Z81-649-2000 公共电话转换网络(PSTN).呼叫线识别限制补充服务.服务描述 (Public Switched Telephone Network (PSTN) - Calling Line Identification Restriction (CLIR) supplementary service - Service description.)
NF X35-101-3-2000 机械的安全.显示和控制传动装置设计的人类工效学要求.第3部分:控制传动装置 (Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3 : control actuators.)
NF E27-164-1976 锁紧螺钉的垫板 (LOCKING SCREW.)
NF C63-211-1970 低压工业设备.额定电压500V交流熔丝断路器.补充规则.内部带撞击器的断路器.单撞击器 (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. FUSES FOR A.C. CIRCUITS RATED 500 V. ADDITIONAL REQUIREMENTS : STRIKER FUSES. INDEPENDENT STRIKERS.)
NF C83-402-2003 分规范:包括资格鉴定和能力鉴定的连接器用电缆转接件附件 (Sectional specification : Cable outlet accessories for connectors, including qualification approval and capability approval.)
NF A81-317-1980 用有耐热钢析出的粉末焊剂.电弧焊用实心金属裸焊条.符号.规范 (SOLID BARE ELECTRODE WIRES FOR SYBMERGED ARC WELDING,DEPOSITING A HEAT-RESISTING STEEL. SYMBOLIZATION. SPECIFICATIONS.)
NF D62-043-2-2000 办公家具.遮板.第2部分:机械安全要求 (Office furniture - Screens - Part 2 : mechanical safety requirements.)
NF F56-354-1980 铁路固定设备.通讯和信号装置架空线路用器材.保护托架 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. CLEARANCE BRACKET.)
NF L14-217-1994 航空航天系列.铝合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2696).)
NF F56-355-1980 铁路固定设备.通讯和信号装置架空线路用器材.S 型托架 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. S SHAPED BRACKET.)
NF A09-206-1985 无损检验.工业放射学.由图象质量指示器进行的放射照相具有直观可感特性的常规方法 (NON DESTRUCTIVE TESTING. INDUSTRIAL RADIOLOGY. CONVENTIONAL METHOD FOR THE CHARACTERISATION OF THE AMOUNT OF VISUAL INFORMATION CONVEYED BY X-RAY IMAGES FROM IMAGE QUALITY INDICATORS.)
NF T52-133-1988 塑料.聚氨基甲酸酯塑料.原异氰酸盐.异氰酸盐功能的测定 (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. RAW ISOCYANATES. DETERMINATION OF ISOCYANATES FUNCTIONS. “HOT“ METHOD.)
NF S71-6031-1998 1994年NF S 71-603的补充件1 ()
NF Q64-017-1981 印刷工艺.印刷和印刷油墨.印刷品在水中褪色性测定 (GRAPHIC TECHNOLOGY. PRINTING AND PRINTING INKS. DETERMINATION OF THE LIKELIHOOD OF COLOUR MIGRATION FROM PRINT TO WATER.)
NF Q60-008-1980 印刷工艺.复制词汇 (GRAPHIC TECHNOLOGY. REPRODUCTION VOCABULARY.)
NF F01-131-1987 铁路车辆. 车轮. 公差. 表面状态. 特殊定尺寸元件 (ROLLING STOCK. WHEELS. TOLERANCES. SURFACE CONDITIONS. SPECIAL DIMENSIONAL INDICATIONS.)
NF Z63-300-9-1995 条码.码规范.EAN/UPC (BAR CODING. SYMBOLOGY SPECIFICATIONS. “EAN/UPC“. (EUROPEAN STANDARD EN 797).)
NF M81-814-1989 矿用提升钢丝绳.纤维组成.特性和试验 (STRANDED WIRE ROPES FOR MINE HOISTING. FIBRE COMPONENTS. CHARACTERISTICS AND TESTS.)
NF Z43-204-1982 缩微照相.手提式缩微阅读器.特性和简易检验方法 (PORTABLE MICROFORM READERS. CHARACTERISTICS AND SIMPLIFIED METHODS OF TEST.)
NF P03-001-2000 私人合同.标准规范.建筑物私人承包合同的签约程序 (Private contracts - Typical specifications - Contract procedure for building works, private contracts.)
NF E27-166-1976 滚花头锁紧螺钉 (LOCKING SCREW WITH KNURLED KNOB.)
NF P62-118-1995 弹性覆面层.增塑剂渗漏的测定 (RESILIENT FLOOR COVERINGS. DETERMINATION OF EXUDATION OF PLASTICIZERS. (EUROPEAN STANDARD EN 665).)
NF M07-027-1962 液体燃料.燃料油中钒含量的测定 (LIQUID FUELS. DETERMINATION OF VANADIUM IN FUEL OILS.)
NF S62-200-1990 消防设备.地面和立柱式消防栓.安装要求 (FIRE FIGHTING EQUIPMENT. GROUND AND PILLAR HYDRANTS. INSTALLATION REQUIREMENTS.)
NF T70-312-1995 军用高能材料.物理化学分析及特性.管状和多孔火炮发射药的尺寸 (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. DIMENSIONS OF TUBULAR OR MULTIPLE HOLES GUN PROPELLANT.)
NF E62-241-1976 机床构造标准部件.多轴头.中间传动轴 (UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN COUNTERSHAFTS.)
NF C93-1331-1987 C93-133-87的补充1 ()
NF T43-022-1992 丁苯橡胶(炭黑或炭黑和油母炼胶).评定方法 (RUBBER, STYRENE-BUTADIENE (CARBON BLACK OR CARBON BLACK AND OIL MASTERBATCHES). EVALUATION PROCEDURE.)
NF E32-020-5-1991 蒸汽发生器.蒸汽锅炉或过热蒸汽锅炉使用的安全.第5部分:工业气体燃烧设备的特殊规定 (INSDUSTRIAL HEATING EQUIPMENTS. SAFETY OF STEAM OR SUPERHEATED STEAM GENERATORS,PERMANENTLY MANNED OR NOT. PART 5 : SPECIFIC REQUIREMENTS FOR NON-PULVERIZED COAL-FUELLED INSTALLATIONS.)
NF P75-216-1997 建筑业用隔热材料.长期浸没状态下吸水量测定 (THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF LONG TERM WATER ABSORPTION BY IMMERSION. (EUROPEAN STANDARD EN 12087).)
NF S72-405/A1-2000 航空体育运动用防护帽 (Helmets for airborne sports.)
NF Z82-922-2003 专用综合业务网.规范、功能模型和信息流.呼叫识别和呼叫链接补充网络特性 (Private Integrated Services Network (PISN) Specification, functional model and information flows- Call identification and call linkage additional network features (V1.1.1).)
NF A10-405-1976 铬铁和硅铬铁的化学分析.铬的测定.滴定法 (CHEMICAL ANALYSIS OF FERROCHROMIUM AND FERROSILICOCHROMIUM. DETERMINATION OF CHROMIUM. TITRIMETRIC METHOD.)
NF Z43-201-1986 缩微照相.缩微阅读器特性的检验方法 (MICROGRAPHICS. METHODS FOR MEASURING PROPERTIES OF READERS FOR TRANSPARENT MICROFORMS.)
NF S12-161-1998 眼科仪器.间接眼膜曲率计 (OPHTHALMIC INSTRUMENTS. INDIRECT OPHTHALMOSCOPES. (EUROPEAN STANDARD EN ISO 10943).)
NF E58-113-3-1995 土方机械.操作员的视野.第3部分:判据 (EARTH-MOVING MACHINERY. OPERATOR`S FIELD OF VIEW. PART 3 : CRITERIA.)
NF T20-421-1976 工业氢氧化钠.取样.试样.按给定配量的主要溶液的制备 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. SAMPLING. TEST SAMPLE. PREPARATION OF THE MAIN SOLUTION FOR CARRYING OUT CERTAIN DETERMINATIONS.)
NF T60-140-1974 石油产品.用四分之一或二分之一标度锥测定润滑脂的针入度 (CONE PENETRATION OF LUBRICATION GREASE USING ONE-QUARTER OR ONE-HALF SCALE CONE EQUIPMENT.)
NF F56-358-1980 铁路固定设备.通讯和信号装置架空线路用器材.十字形托架 (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD ELECTRIC TELECOMMUNICATION AND SIGNALLING LINES. CROSSING BRACKET.)
NF C61-3203-1999 1981年NF C 61-320的补充件3 ()
NF L17-461-1993 航空航天系列.聚脂胶片.粘度的测定 (AEROSPACE SERIES. PREPREGS. DETERMINATION OF TACKNESS.)
NF M03-048-2000 固体矿物燃料.灰分可熔性测定 (Solid mineral fuels - Determination of ash fusibility.)
NF M60-303-1999 核能.核燃料技术废物.用伽码度谱仪测定辐射废料形式的活性测量设备校准的推荐方法 (NUCLEAR ENERGY. NUCLEAR FUEL TECHNOLOGY-WASTE. RECOMMENDATIONS FOR THE CALIBRATING OF AN ACTIVITY MEASUREMENT FACILITY OF RADIOACTIVE WASTE FORMS BY GAMMA SPECTROMETRY.)
NF C73-6341-1986 C73-634-82的补充1 ()
NF T60-120-1972 石油产品.石油的蜡和石蜡中油含量的测定 (DETERMINATION OF OIL CONTENT IN PARAFFINS AND PETROLEUM WAXES.)
NF D11-120-1988 家用丙烯酸塑料成品浴盆规范 (SPECIFICATION FOR FINISHED BATHS FOR DOMESTIC PURPOSES MADE OF ACRYLIC MATERIAL. (EUROPEAN STANDARD EN 198).)
NF P98-631-1991 横路标.公路上使用的标记.用化学方法分析.从白色涂料产品中提取的粉末材料 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF MINERAL POWDER EXTRACTED FROM WHITE MARKING PRODUCT BY CONVENTIONAL CHEMICAL METHODS.)
NF C93-7671-1996 NF C93-767-94补充件1和2 ()
NF L17-918-1997 航空航天系列.降落伞纤维.扭编绳/编带和窄幅织物的试验.浸入冷水后尺寸变化的测定 (AEROSPACE SERIES. PARACHUTE FABRIC. TESTS ON BRAIDED ROPES/BRAIDS AND NARROW FABRICS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER IMMERSION IN COLD WATER.)
NF E52-115-2-2000 提升设备.分类.第2部分:汽车起重机 (Lifting appliances - Classification - Part 2 : mobile cranes.)
NF E22-561-1986 滑动轴承.轴承材料硬度试验.第1部分:复合材料 (PLAIN BEARINGS. HARDNESS TESTING OF BEARING METALS. PART 1 : COMPOUND METERIALS.)
NF L21-211-1980 铝合金制半埋头铆钉(英寸) (MUSHROOM HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF P98-795-1999 公路冬季保养设备和公路辅助设备的维护.冬季清洁设备的标记和照明.特性和规范 (HIGHWAYS WINTER MAINTENACE PLANT AND HIGWAYS SIDE EQUIPMENT MAINTENANCE. ROASIGNS, MARKS AND LIGHTING OF WINTER INTERVENTION UNITS. CHARACTERISTICS AND SPECIFICATIONS.)
NF S61-990-2002 火灾探测和火灾警报系统.第10部分:火焰探测器.点探测器 (Fire detection and fire alarm systems - Part 10 : flame detectors - Point detectors.)
NF C73-100-1960 家用电器.一般规则 (HOUSEHOLD ELECTRICAL APPLIANCES. GENERAL REQUIREMENTS.)
NF B42-010-1997 高技术陶瓷.陶瓷粉末的试验方法.第10部分:压实特性的测定 (ADVANCED TECHNICAL CERAMICS. METHODS OF TEST FOR CERAMIC POWDERS. PART 10 : DETERMINATION OF COMPACTION PROPERTIES. (EUROPEAN STANDARD EN 725-10).)
NF P50-102-1983 太阳能.词汇.第2部分.热转换太阳能收集器 (SOLAR ENERGY. VOCABULARY. PART 2. SOLAR COLLECTORS FOR HEAT CONVERSION.)
NF U43-006-1972 植物病药物产品.芋酸.要求 (PHYTOPHARMACEUTICAL PRODUCTS. NICOTINE. REQUIREMENTS.)
NF E62-240-1976 机床构造标准部件.多轴头.中间单轴 (UNIT HEADS. MULTI SPINDLE HEADS. SIMPLE CONTERSHAFTS.)
NF B51-272-2-1995 木质人造板.甲醛释放量的测定.气体分析法测量甲醛释放量 (WOOD-BASED PANELS. DETERMINATION OF FORMALDEHYDE RELEASE. PART 2 : FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD. (EUROPEAN STANDARD EN 717-2).)
NF S31-303-1997 道路交通噪音减弱装置.声性能测定试验方法.第3部分:正常交通噪音范围 (ROAD TRAFFIC NOISE REDUCING DEVICES. TEST METHOD FOR DETERMINING THE ACOUSTIC PERFORMANCE. PART 3 : NORMALIZED TRAFFIC NOISE SPECTRUM. (EUROPEAN STANDARD EN 1793-3).)
NF E38-350-1995 热交换.动力装置冷却器的热力学性能检验方法 (HEAT EXCHANGERS. VERIFICATION METHODS FOR THERMODYNAMIC PERFORMANCE OF POWER PLANT CONDENSERS.)
NF U02-121-1976 农林用机具.可移动的灯光信号装置.安装尺寸规格 (AGRICULTURAL AND FORESTRY IMPLEMENTS. REMOVABLE SIGNALLING DEVICES. DIMENSIONAL FITTING REQUIREMENTS.)
NF E62-210-1976 机床构造标准部件.多轴头.钻床主轴.概论 (UNIT HEADS. MULTI SPINDLE HEADS. DRILLING SPINDLES. GENERAL.)
NF P85-530-1992 连接产品.密封用釉料和化合物.粘滞油基密封剂.规范 (JOINTING PRODUCTS. GLAZING MATERIALS AND COMPOUNDS FOR SEALING. PLASTIC-OIL BASED SEALANTS. SPECIFICATIONS.)
NF X45-311-2000 过滤盒.试验方法.空气渗漏性的测定 (Filter cartridges - Test methods - Determination of air permeability.)
NF C32-3221-1988 C 32-322-82的补充1 ()
NF R12-902-1987 道路车辆.PTAC型大于3.5t商用车辆和公共运输车辆的垫板.功能特性 (ROAD VEHICLES. WHEEL CHOCKS FOR COMMERCIAL VEHICLES OF MORE THAN 3,5 T OF PTAC AND BUSES. FUNCTIONAL CHARACTERISTICS.)
NF S95-158-1997 脉冲血氧计.特殊要求(欧洲标准EN 865) (PULSE OXIMETERS. PARTICULAR REQUIREMENTS. (EUROPEAN STANDARD EN 865).)
NF E62-254-1976 机床构造标准部件.多轴头.导向装置通气孔 (UNIT HEADS. MULTI SPINDLE HEADS. DEFLECTOR CHIMNEY.)
NF C45-255-55-2003 机电式“有“或“无“继电器.第55部分:空白详细规范.经质量评定的机电式“有“或“无“电信继电器.11 mm X? (Electromechanical all-or-nothing relays - Part 55 : blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) b)
NF T60-123-1972 石油产品.石蜡和蜡针入度的测定 (PETROLEUM PRODUCTS. DETERMINATION OF NEEDLE PENETRATION OF PARAFFINS AND WAXES.)
NF B56-014-1980 纤维板.弯曲试验 (WOOD WOOL SLABS. MEASUREMENT OF BENDING STRENGTH.)
NF C86-432-1988 电子元件.CENELEC质量保证体系.带薄膜电阻器的电路.特殊规范 (SEMICONDUCTOR DEVICES. HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. FILM RESISTORS NETWORKS. BLANK DETAIL SPECIFICATION. (SPECIFICATION CECC 64 101).)
NF F17-020-1-2003 铁路设施.空气动力学.第1部分:符号和单位 (Railway applications - Aerodynamics - Part 1 : symbols and units.)
NF P78-201-1/A3-2000 DTU 39.建筑工程.玻璃镜和镶嵌玻璃工作.第1部分:技术规范 (DTU 39 - Building works - Glass mirror and glazing work - Part 1 : technical specifications.)
NF A81-318-1980 有不锈钢和/或耐热钢的出的粉末焊剂,电弧焊用实心金属裸焊丝.符号.规范 (SOLID BARE ELECTRODE WIRES FOR SUBMERGED ARC WELDING,DEPOSITING A STAINLESS AND/OR HEAT-RESISTING STEEL. SYMBOLIZATION. SPECIFICATIONS.)
NF X10-309-1986 明渠液流测量.速度-面积法.误差测量数据的收集和处理 (LIQUID FLOW MEASUREMENT IN OPEN CHANNELS. VELOCITY AREA METHODS. COLLECTING AND PROCESSING OF DATA FOR DETERMINATION OF ERRORS MEASUREMENT.)
NF P37-407-1947 屋顶附件.石板或平瓦屋顶用带接水槽和箱屋顶框架.术语.尺寸 (ROOFING ACCESSORIES. ROOF SKYLIGHT WITH GUTTER AND RAIN WATER HEAD FOR SLATE AND PLAIN TILED ROOF TOPS. TERMINOLOGY. DIMENSIONS.)
NF E37-501-9-2000 气体涡轮.征购.第9部分:可信性,可用性,可维修性和安全性 (Gas turbines - Procurement - Part 9 : reliability, availability, maintainability and safety.)
NF H44-030-1986 烟雾剂发生器.气雾剂阀.11mm皮碗 (AEROSOLS DISPENSERS. VALVES. FERRULE 11 MM.)
NF U43-008-1972 植物病药物产品.醋酸铜,要求 (PHYTOPHARMACEUTICAL PRODUCTS. COPPER ACETATE. REQUIREMENTS.)
NF P23-201-1-2000 DTU 36.1.建筑工程.木连接.第1部分:技术规范 (DTU 36.1 - Building works - Wood joinery - Part 1 : technical specifications.)
NF X50-128-1990 质量管理与质量体系单元.购货和供货指南 (QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS. GUIDELINES CONCERNING PURCHASES AND SUPPLIES.)
NF Z10-005-1975 连续印刷品.生产要求 (SPECIFICATIONS FOR CONTINUOUS PRINTED FORMS.)
NF C47-7401-1996 NF C47-740-95补充件1 ()
NF F50-106-1991 铁路固定设备.钢轨的热焊接.过程验收 (RAILWAY FIXED EQUIPMENT. THERMIT WELDING OF RAILS. APPROVAL OF A PROCESS.)
NF P30-302-1963 屋顶.波形板弯曲破裂试验 (ROOFING. GENERAL DETAILS. BEND BREAK TEST OF CORRUGATED SHEET.)
NF T51-519-1999 塑料.不饱和聚酯和环氧树脂.氯总含量的测定 (PLASTICS. UNSATURATED POLYESTERS AND EPOXIDE RESINS. DETERMINATION OF TOTAL CHLORINE CONTENT. (EUROPEAN STANDARD EN ISO 4615).)
NF C93-7681-1996 NF C93-768-94补充件1和2 ()
NF P31-202-2-1997 DTU 40.21.建筑工程.专业合同.滑动的或有槽的陶土瓦制屋顶覆盖物.第2部分:特殊条款 (DTU 40.21. BUILDING WORKS. PRIVATE CONTRACTS. ROOF COVERING MADE OF SLIPPING OR GROOVED CLAY TILES. PART 2 : SPECIAL CLAUSES.)
NF P31-201-12-1999 1993年NF P 31-201-1的补充件2 ()
NF P98-744-5-1996 道路建设及维修设备.物质生产单位的连续配制设备的现场装置的校正及检验.第5部分:干重计量机.物质重量试验 (ROAD CONSTRUCTION AND MAINTENANCE EQUIPMENT. ON-SITE CALIBRATION AND VERIFICATION OF THE SETTINGS OF THE CONTINUOUS DOSING APPARATUS OF MATERIAL PRODUCTION PLANTS. PART 5 : DRY BULK WEIGHING DOSING MACHINE. SUBSTANCE WEIGHING TEST.)
NF T20-413-1975 工业碳酸钠.50℃时不溶于水的物质的测定 (SODIUM CARBONATE FOR INDUSTRIAL USE - DETERMINATION OF MATTER INSOLUBLE IN WATER AT 50 DEGRES C)
NF Z63-311-1999 条形码.试验规范.条形码符号(欧洲标准EN1635) (BAR CODING. TEST SPECIFICATIONS. BAR CODE SYMBOLS. (EUROPEAN STANDARD EN 1635).)
NF M62-300-1992 防电离辐射保护壳.厚度为150mm,200mm和250mm的铅防护壳.第1部分:厚度为150mm和200mm的波纹式防护壳 (ENCLOSURES FOR PROTECTION AGAINST IONIZING RADIATION. LEAD SHIELDING UNITS FOR 150 MM, 200 MM AND 250 MM THICK WALLS. PART 1 : CHEVRON UNITS OF 150 MM AND 200 MM THICKNESS.)
NF L55-515-1976 带中心插孔灯座和TI3/ 4灯泡的小型灯 (MINIATURE LAMPS WITH SINGLE CONTACT CAP AND T 1 3/4 BULB.)
NF T90-378-2000 水质.蚤状水蚤属magna Strauss7天慢性毒性测定.种群生长抑制简化试验 (Water quality - Determination of chronic toxicity to Daphnia magna Strauss in 7 days - Simplified population growth inhibition test.)
NF S52-347-1997 登山设备.冰锚.安全要求和试验方法(欧洲标准EN 568) (MOUNTAINEERING EQUIPMENT. ICE ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 568).)
NF T75-249-2000 木姜子荜橙茄香精油 (Oil of Litsea cubeba (Litsea cubeba Pers.).)
NF C51-903-1968 旋转电机.电机用配件.径向刷杆 (ROTATING ELECTRICAL MACHINERY. RADIAL BRUSH HOLDERS.)
NF C93-401-1985 电子元件.印制电路板的两部件连接和插入连接 (ELECTRONIC COMPONENTS. TWO PART AND EDGE SOCKET. CONNECTORS FOR PRINTED BOARD APPLICATION.)
NF P45-200/A1-2000 燃气供应.建筑物的燃气管道工程.小于或等于5巴的最大操作压力.功能推荐 (Gas supply - Gas pipework for buildings - Maximum operating pressure up to and including 5 bar - Functional recommendations.)
NF A02-002-1976 有色金属和非铸铁合金制造方式和交货条件常用名称 (CONVENTIONAL DESIGNATION OF THE METHODS OF MANUFACTURE AND DELIVERY STATES OF CAST NON FERROUS METALS AND ALLOYS.)
NF T20-426-1976 工业氢氧化钠.碳酸盐的测定.滴定法 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CARBONATES CONTENT. TITRIMETRIC METHOD.)
NF C42-152-1949 电测仪表用0·5伏分流器.(精密等级0·5和1) (0.3 VOLT SHUNTS FOR ELECTRICAL MEASURING INSTRUMENTS. (CLASSES 0.5 AND 1).)
NF B38-510-2-1999 增强材料.纺织玻璃纤维短切原丝规范.第2部分:试验方法与一般要求 (REINFORCEMENTS. SPECIFICATION FOR TEXTILE GLASS CHOPPED STRANDS. PART 2 : TEST METHODS AND GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 12971-2).)
NF Z82-037-2003 专用综合业务网.通过H.323网络的QSIG隧穿用映射功能 (Private Integrated Services Network (PISN) - Mapping functions for the tunnelling of QSIG through H.323 networks (V1.1.1).)
NF V03-918-3-1999 油菜子.葡萄糖碱含量的测定.第3部分:高效液相色谱快速法 (RAPESEED. DETERMINATION OF GLUCOSINOLATES CONTENT. PART 3 : RAPID METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY.)
NF E62-255-1976 机床构造标准部件.多轴头.1号和2号攻螺纹轴上的直齿主动齿轮 (MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. CONTROL STRAIGHT-TOOTHED PINIONS FOR TAPPING SPINDLES NO 1 AND 2.)
NF B50-103-1-1994 木材和木基制品.木材的天然耐用性.第1部分:木材天然耐久性的分类和试验原则 (DURABILITY OF WOOD AND WOOD-BASED PRODUCTS. NATURAL DURABILITY OF SOLID WOOD. PART 1 : GUIDE TO THE PRINCIPLES OF TESTING AND CLASSIFICATION OF THE NATURAL DURABILITY OF WOOD. (EUROPEAN STANDARD EN 350-1).)
NF T20-432-1976 工业氢氧化钠.钙和镁含量的测定.火焰原子吸收法 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM AND MAGNESIUM CONTENTS. FLAME ATOMIC ABSORPTION METHOD.)
NF C52-061-1969 变压器.23kV,50A或125A的穿心套管 (TRANSFORMERS. PLUG-IN BUSHINGS RATED 23 KV AND 50 A OR 125 A.)
NF B56-031-1982 纤维板.聚苯乙烯合成的.规范 (POLYSTYREN COMPOSIITE WOOD WOOL SLABS. SPECIFICATIONS.)
NF M07-053-2003 石油产品.硫含量测定.能量分散X射线荧光光谱法 (Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry.)
NF C31-683/A1-2000 特种绕组线规范.第33部分:玻璃纤维环绕树脂或清漆浸渍的裸的或漆包扁铜线.温度指数200 (Specifications for particular types of winding wires - Part 33 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.)
NF T60-362-1980 工业甘油.纯甘油.20摄氏度时密度的测定 (GLYCERINES FOR INDUSTRIAL USE. PURIFIED GLYCEROL. DETERMINATION OF DENSITY AT 20 DEGREES C.)
NF D11-121-1988 丙烯制家用浴缸.浴缸阀安装范围的补充规范 (BATHS FOR DOMESTIC PURPOSES MADE OF ACRYLIC MATERIAL. ADDITIONAL SPECIFICATION FOR THE MOUNTING OF TAPS ON BATHS.)
NF P84-507-1996 地膜试验.地膜和地膜衬里系统静态击穿力的测定.没有支点的筒形模击穿实例 (TESTING OF GEOMEMBRANES. DETERMINATION OF THE STATIC PUNCTURE RESISTANCE OF GEOMEMBRANES AND GEOMEMBRANE LINING SYSTEMS. CASE OF CYLINDRICAL PUNCH WITHOUT SUPPORT.)
NF F63-809-1992 铁路车辆.低卤化电连接器和薄绝缘层及保护层电缆 (RAILWAY ROLLING STOCK. LOW HALOGEN ELECTRICAL CONDUCTORS AND CABLES WITH THIN INSULATION AND PROTECTIVE LAYERS.)
NF B35-029-1974 实验室用玻璃器皿.常用有直通孔的可互换龙头.(板手和节流器) (LABORATORY GLASSWARE. GENERAL PURPOSE INTERCHANGEABLE STOPCOCKS WITH SINGLE STRAIGHT BORE.)
NF E62-251-1976 机床构造标准部件.多轴头.偏心轮毂直齿轮 (UNIT HEADS. MULTI SPINDLE HEADS. OFFSET BOSS STRAIGHT TOOTHED PINIONS.)
NF P16-401-1947 椭圆形下水道内剖面 (PIPING. INTERNAL CROSS-SECTIONS OF OVOID SEWERS.)
NF E09-011-1993 机械安全.避免人身体部分被挤压的最小间隙.(欧洲标准EN 349) (SAFETY OF MACHINERY. MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY. (EUROPEAN STANDARD EN 349).)
NF V04-054-1-2000 牛奶和奶产品.用荧光剂方法对碱性磷酸酶活性的测定.第1部分:牛奶和奶饮料 (Milk and milk products - Determination of alkaline phosphatase activity using a fluorimetric method - Part 1 : milk and milk-based drinks.)
NF U10-154-1974 农用拖拉机.碳氢燃料消耗的测定和说明? (AGRICULTURAL TRACTORS. DATA AND EXPRESSION OF RESULTS ON FUEL CONSUMPTION.)
NF G07-169-1994 织物.编织纤维试验.测定每单位长度和单位面积的针脚数 (TEXTILES. TESTS FOR KNITTED FABRICS. DETERMINATION OF NUMBER OF STICHES PER UNIT LENGTH AND UNIT SURFACE.)
NF R16-338-2000 喷油装置.词汇.第4部分:高压管端连接 (Fuel injection equipment - Vocabulary - Part 4 : high-pressure pipes end-connections.)
NF M88-610-1959 石油工业.集装箱容量测量鉴定牌 (PETROLEUM INDUSTRY. CALIBRATION IDENTIFICATION PLATE FOR CONTAINERS.)
NF S11-100-1988 光学和光学仪器.接触透镜.词汇和符号 (OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. VOCABULARY AND SYMBOLS.)
NF S52-339-1997 登山设备.辅助绳索.安全要求和试验方法(欧洲标准EN 564) (MOUNTAINEERING EQUIPMENT. ACCESSORY CORD. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 564).)
NF C93-1332-1987 NF C93-133-87的补充件2 ()
NF T54-101-1974 塑料.塑料板.外现和尺寸.检验方法 (PLASTIC SHEET. PRESENTATION AND DIMENSIONS. METHODS OF CONTROL.)
NF L46-016-1987 环形接头.41B8丁烯丙烯橡胶.精确度A级.性能3级 (O-RINGS. ETHYLENE-PROPYLENE RUBBER 41B8. PRECISION CLASS A. PERFORMANCE CLASS 3.)
NF T50-064-2-1999 塑料.可比较多点数据的采集和表示.第2部分:热性能和工艺性能 (PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA. PART 2 : THERMAL AND PROCESSING PROPERTIES. (EUROPEAN STANDARD EN ISO 11403-2).)
NF G07-141-1990 纺织.纺织品的试验.家用滚筒烘干试验 (TEXTILES. TESTING OF FABRICS. DRYING TEST WITH A TUMBLER DRYER FOR DOMESTIC USE.)
NF E58-130-1995 土方机械.机械.安装在机器上的前后可听到的报警信号.声音试验方法 (EARTH-MOVING MACHINERY. MACHINERY. MACHINE-MOUNTED FORWARD AND REVERSE AUDIBLE WARINING ALARM. SOUND TEST METHOD.)
NF V04-217-1992 牛奶和牛奶制品.氨和脲含量的测定.酶测定法 (MILK AND MILK PRODUCTS. DETERMINATION OF AMMONIAC AND UREA CONTENTS. ENZYMATIC METHOD.)
NF F11-910-1-2003 铁路设施.制动.公共交通制动系统.第1部分:性能要求 (Railway applications - Braking - Mass transit brake systems - Part 1 : performance requirements.)
NF C93-331-1973 电子元件.磁和铁氧体元件.可调或不可调低电感线圈.一般规定 (COMPONENTS FOR ELECTRONIC EQUIPMENT. MAGNETIC COMPONENTS AND FERRITE MATERIALS. INDUCTOR OF LOW SELF-INDUCTANCE VALUE. GENERAL REQUIREMENTS.)
NF T01-013-1974 pH计.用玻璃电极法测定PH值.词汇和测定方法 (PH-MEASUREMENT. VOCABULARY . ELECTROMETRIC PH-MEASUREMENT BY A GLASS ELECTRODE.)
NF Z66-301-1987 信息处理系统.数据通信.多链路规程 (INFORMATION PROCESSING SYSTEMS. DATA COMMUNICATION. MULTILINK PROCEDURES.)
NF A21-104-1976 铬矿石的化学分析.磷的测定.分光光度法 (CHEMICAL ANALYSIS OF CHROMIUM ORES. DETERMINATION OF PHOSPHORUS. SPECTROPHOTOMETRIC METHOD.)
NF T51-553-2-1999 塑料.含氟聚合物的分散、模塑和挤制材料.第2部分:试样制备和性能测定 (PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 12086-2).)
NF P93-330-1995 施工现场用设备.建筑和土木工程现场用金属混凝土吊桶.要求.试验 (BUILDING SITE EQUIPMENT. METALLIC CONCRETE BUCKETS FOR BUILDING AND CIVIL ENGINEERING SITES. REQUIREMENTS. TESTS.)
NF G07-307-1987 纺织.纤维试验.羊毛纤维束断裂强度的测定 (TEXTILES. FIBRE TESTS. DETERMINATION OF THE BREAKING STRENGTH OF WOOL FIBRE BUNCHES.)
NF C93-355-1968 电子元件.无线电收音机的中频变压器 (COMPONENTS FOR ELECTRONIC EQUIPMENT. INTERMEDIATE FREQUENCY TRANSFORMERS USED IN BROADCAST RECEIVERS.)
NF X43-262-1990 空气质量.工作环境的空气.粉尘污染的微孔沉淀物的重量测定.旋转杯法 (AIR QUALITY. WORKPLACE AIR. GRAVIMETRIC DETERMINATION OF PARTICULATE POLLUTION DEPOSITS. ROTATING DISK METHOD.)
NF R63-703-1987 道路车辆.车库工具.步数计 (ROAD VEHICLES. GARAGE EQUIPMENT. PEDOMETERS.)
NF P98-614-1991 路面横标记.道路上使用的标记.配料的测定 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. WEIGHT DETERMINATIONS.)
NF T20-460-1980 工业硫酸钠.钙含量的测定.原子吸收分光光度法 (SODIUM SULPHATE FOR INDUSTRIAL USE. DETERMINATION OF CALCIUM CONTENT FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.)
NF E58-053-2000 土方机械.翻车保护结构.实验室试验和性能要求 (Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements.)
NF X50-005-1975 供销关系.商品的比较试验.基本原则 (SUPPLIERS-USERS RELATIONSHIP-COMPARATIVE TESTING OF PRODUCTS-BASIC PRINCIPLES.)
NF C20-7021-1993 气侯的基本试验和机械坚固耐用的试验.试验方法.干热.修改件1 ()
NF P98-625-1991 路面横标记.道路上使用的标记.用气相色谱法对醇酸树脂的分析 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF ALKYD RESINS BY GAS PHASE CHROMATOGRAPHY.)
NF F58-006-1994 铁路建造和保养设备.高速线路更新工作的线路更新顺序.规范 (RAILWAY TRACK CONSTRUCTION AND MAINTENANCE PLANT. TRACK RENEWAL TRAIN FOR HIGH SPEED TRACK RENEWAL WORK. SPECIFICATIONS.)
NF P01-101-1964 建筑尺寸.建筑工程和建筑构件协调尺寸? (STRUCTURAL DIMENSIONS. COORDINATION DIMENSIONS FOR STRUCTURES AND STRUCTURAL ELEMENTS.)
NF E62-225-1976 机床构造标准部件.多轴头.攻螺纹复制机 (MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING REPRODUCERS.)
NF P16-250-2-2000 建筑物内的重力排水系统.第2部分:卫生管道,布局和计算 (Gravity drainage systems inside buildings - Part 2 : sanitary pipework, layout and calculation.)
NF T56-123-1974 合成橡胶或塑料微孔制品.微孔材料在一定时间内吸水性的测定 (CELLULAR PRODUCTS OF ELASTOMER OR PLASTICS. DETERMINATION OF WATER ABSORPTION OF CELLULAR MATERIALS OVER A GIVEN PERIOD OF TIME.)
NF X10-341-1992 明渠液体流量测量.结冰条件下的流量测量 (LIQUID FLOW MEASUREMENT IN OPEN CHANNELS. FLOW MEASUREMENTS UNDER ICE CONDITIONS.)
NF T57-103-2000 纤维增强塑料复合材料.平面方向压缩性的测定 (Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction.)
NF C20-774-2000 环境试验.第2部分:试验.试验Xa:流体污染 (Environmental testing - Part 2 : tests - Test Xc : fluid contamination.)
NF Q15-009-1976 纸和纸板.邮票和税标用纸的特性 (PAPER AND BOARD. CHARACTERISTICS OF PAPER FOR POSTAGE AND REVENUE STAMPS.)
NF V76-111-1980 水果和蔬菜汁.挥发物质含量的测定(气相色谱法) (FRUIT AND VEGETABLE JUICES. DETERMINATION OF VOLATILE SUBSTANCES (GAS/LIQUID CHROMATOGRAPHIC METHOD).)
NF B10-511-1975 石灰石.动力弹性模量的试验 (LIMESTONE - TEST FOR DYNAMIC MODULUS OF ELASTICITY.)
NF E65-402-2000 现场工地用砌体和石料切割机械.安全 (Masonry and stone cutting-off machines for job site - Safety.)
NF T47-126-1983 传送带.耐裂纹扩大的强度(试验方法) (CONVEYOR BELTS. TEAR PROPAGATION RESISTANCE OF THE CARCASS (METHOD OF TEST).)
NF L22-573-2000 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温) (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at)
NF C23-581-1-2-2000 用于存在易燃灰尘的电气装置.第1-2部分:由外壳保护的电气装置.选择,安装和维修 (Electrical apparatus for use in the presence of combustible dust - Part 1-2 : electrical apparatus protected by enclosures - Selection, installation and maintenance.)
NF G90-057-1977 家用缝纫机.针脚长度的不均匀性试验 (HOUSEHOLD SEWING MACHINES.TEST ON IRREGULARITY IN STITCH LENGTH.)
NF S31-119-2-2000 声学.道路表面音质的现场表征法.旁路声学测量.第2部分:受控的旁路法 (Acoustics - In situ characterization of the acoustic qualities of road surfaces - Pass by acoustic measurement - Part 2 : controlled pass-by method.)
NF U34-200-2000 林业设备.活动和自推式设备.术语、定义和分类 (Machinery for forestry - Mobile and self-propelled machinery - Terms, definitions and classification.)
NF Z73-030-12-1998 NF Z 73-030-1-1994的补充件2 ()
NF P94-054-1991 土壤.检验与试验.土壤固体粒子密度测定.水浓缩法 (SOILS : INVESTIGATION AND TESTING. DETERMINATION OF PARTICLE DENSITY. PYCNOMETER METHOD.)
NF V05-123-1982 水果.蔬菜及其制品.无火焰原子吸收光度法测定汞含量 (FRUITS,VEGETABLES AND DERIVED PRODUCTS. DETERMINATION OF THE MERCURY CONTENT BY MEANS OF FLAMELESS ATOMIC ABSORPTION PHOTOMETRY.)
NF T20-425-1976 工业氢氧化钠.二氧化硅含量的测定.喹啉钼硅酸盐络合物沉淀重量分析法 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF SILICA CONTENT. GRAVIMETRIC METHOD BY PRECIPITATION OF QUINOLEINE MOLYBDOSILICATE.)
NF T20-523-1973 工业硅酸钠硅酸钾.二氧化硅含量的测定.不溶性的重量法.滴定法 (SODIUM AND POTASSIUM SILICATES FOR INDUSTRIAL USE. DETERMINATION OF SILICA. GRAVIMETRIC METHOD BY INSOLUBILIZATION. TITRIMETIC METHOD.)
NF S97-122-3-2003 非放射性医疗器械.主要伤口敷料试验方法.第3部分:防水性 (Non-active medical devices - Test methods for primary wound dressings - Part 3 : waterproofness.)
NF B56-017-1980 纤维板.氯离子含量的测定 (WOOD WOOL SLABS. DETERMINATION OF CHLORURE CONTENT.)
NF F76-024-1976 铁路固定设备.圆头玻璃管 (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. SOUNDING HAMMER.)
NF T20-428-1976 工业氢氧化钠.硫化物含量的测定.还原法和滴定法 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF SULPHUR COMPOUNDS. METHOD BY REDUCTION AND TITRIMETRY.)
NF C26-148-16-2003 电工用压敏胶粘带.第3部分:单项材料规范.活页16:涂压敏粘合剂的聚酯薄膜/玻璃长丝复合带 (Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 16 : polyester film/glass filament combinations with pressure-sensitive adhesive.)
NF S91-015-1999 口腔内数字成像射线照相相片 (INTRABUCCAL DIGITIZED IMAGE RADIOGRAPHIC PRINTS.)
NF P34-206-2-1993 建筑工程.私人合同.预涂漆铝板或铝板制成的型屋顶覆盖物.第2部分:特别条款 (DTU 40-36. BUILDING WORKS. PRIVATE CONTRACTS. PROFILED ROOF COVERING MADE OF PREPAINTED ALUMINIUM SHEET OR ALUMINIUM SHEET. PART 2 : SPECIAL CLAUSES.)
NF C18-40011-1997 NF C 18-400-1994的补充件11 ()
NF F42-041-1990 铁路固定设备.开关.750v.1500v和300v直流驱动系统用外分段开关 (RAILWAY FIXED EQUIPMENT. OUTER SWITCH DISCONNECTORS FOR 750,1500 AND 3000 V DIRECT CURRENT TRACTIONS SYSTEMS. CHARACTERISTICS AND TESTS.)
NF E01-001-1967 机械上用的1到500mm线性公称尺寸 (NOMINAL LINEAR DIMENSIONS FROM 1 MM TO 500 MM FOR MECHANICAL ENGINEERING.)
NF U21-011-1975 耕地机具.双向犁.名称 (SOIL WORKING EQUIPEMENT-REVERSIBLE CARRIED PLOUGH-NOMENCLATURE.)
NF C73-8221-1996 NF C73-822-96补充件1 ()
NF F50-701-1977 铁路固定设备.米制轨道.新式轨距线路的铺设.轨距 (FIXED RAILWAY EQUIPMENT. METRIC GAUGE LINE. LAYING OF NEW TRACKS. GAUGES.)
NF C93-576-1969 电子元件.射频用连接件.矩形中空金属导波管和绝缘.第1分册.一般条件 (COMPONENTS FOR ELECTRONIC EQUIPMENT - CONNECTING PARTS FOR RADIOFREQUENCIES. HOLLOW METALLIC RECTANGULAR WAVEGUIDES AND ASSOCIATED FLANGES.)
NF P98-634-1991 路面横标记.道路上使用的标记.取样的方法 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. SAMPLING METHODS.)
NF X10-131-1974 密封管道中水流量的测定.示踪法.第1部分:综合 (MEASUREMENT OF WATER FLOW IN CLOSED CONDUITS.TRACER METHODS PART I:GENERAL)
NF G07-309-1987 纺织.纤维试验.棉花纤维的紧绷长度和均匀指数的测定 (TEXTILES. FIBRE TESTS. DETERMINATION OF SPAN LENGTH AND UNIFORMITY INDEX OF COTTON FIBRES.)
NF B41-213-1995 高技术陶瓷.单片陶瓷.热物理特性.第1部分:热膨胀的测定 (ADVANCED TECHNICAL CERAMICS. MONOLITHIC CERAMICS. THERMO-PHYSICAL PROPERTIES. PART 1 : DETERMINATION OF THERMAL EXPANSION. (EUROPEAN STANDARD EN 821-1).)
NF L17-751-1992 航空航天系列.R-玻璃粗纱.产品标准.RC10 80 P9HT标准基础上粗纱 (AEROSPACE SERIES. R-GLASS ROVINGS. PRODUCT STANDARD. ROVINGS ON THE BASIS OF STRANDS RC10 80 P9HT.)
NF E04-556-1995 技术制图.外形尺寸和公差 (TECHNICAL DRAWINGS. DIMENSIONING AND TOLERANCING OF PROFILES. (EUROPEAN STANDARD EN ISO 1660).)
NF T70-347-1997 防爆材料.物理-化学分析和特性.萃取法测定二级爆炸物中的石墨含量 (ENERGETIC MATERIALS FOR DEFENSE. PHYSICO-CHEMICAL ANALYSIS AND PROPERTIES. DETERMINATION OF GRAPHITE CONTENT IN SECONDARY EXPLOSIVES BY EXTRACTION.)
NF X43-009-1973 大气污染.二氧化氮在大气中的含量的测定(GRIESS-SALTZMAN) (NITROGEN DIOXYDE CONTENT OF THE ATMOSPHERE (GRIESS SALTZMAN REACTION).)
NF E62-214-1976 机床构造标准部件.多轴头.螺纹端面钻床传动轴 (UNIT HEADS. MULTI SPINDLE HEADS. DRIVEN THREADED END DRILLING SPINDLES.)
NF L22-588-2000 航空用螺栓和螺母.镀银不锈钢制深槽单耳内锁紧系留螺母.ISO M或ISO MJ螺纹.分类:1100 MPa/425度(室温下) (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper)
NF P63-203-1-1993 建筑工程.木制地板.第1部分:技术规范 (DTU 51-3. BUILDING WORKS. FLOORS OF TIMBER OR TIMBER-DERIVATIVE BOARD. PART 1 : TECHNICAL SPECIFICATIONS.)
NF S98-118-2-2000 医疗设备的消毒.微生物法.第2部分:消毒过程鉴定所做的无菌实验 (Sterilisation of medical devices - Microbiological methods - Part 2 : tests of sterility performed in the validation of a sterilization process.)
NF C47-73011-1996 NF C47-730-95补充件11和12 ()
NF T43-012-1992 异戊二烯橡胶(IR).非油扩散的溶液聚合型.评定程序 (ISOPRENE RUBBER (IR). NON-OIL-EXTENDED, SOLUTION-POLYMERIZED TYPES. EVAUATION PROCEDURE.)
NF P90-133-2000 运动场所表面.合成草皮和织物试样的制备过程 (Surfaces for sports areas - Procedure for the preparation of synthetic turf and textile test pieces.)
NF S52-716-1988 XX (ALPINE SKIS. SKI BINDINGS. TEST SOLES FOR SKI BINDINGS TESTS.)
NF E22-151-1967 直齿花键.圆柱轴和轴套 (CYLINDRICAL STRAIGHT-SIDED SERRATIONS.)
NF B30-004-1974 玻璃.水晶、晶体和声学玻璃 (GLASS.CRYSTAL,CRYSTAL GLASS,CRYSTALLIN.)
NF T20-496-1973 工业三磷酸钠.水合作用放热效应的测定? (SODIUM TRIPOLYPHOSPHATE FOR INDUSTRIAL USE. TEMPERATURE RISE TEST.)
NF C72-1055-1995 NF C72-105 88年6月补充件5 ()
NF F62-011-1-1992 铁路车辆.一般功能要求.晶体管镇流器.一般性及试验 (RAILWAY ROLLING STOCK. FUNCTIONAL GENERAL REQUIREMENTS. TRANSISTORIZED BALLASTS. GENERALITIES AND TESTS.)
NF B41-210-2-2003 高级工业陶瓷.整体陶瓷的试验方法.热机械特性.第2部分:自重变形的测定 (Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2 : determination of self-loaded deformation.)
NF U02-107-1996 拖拉机.农业和林业机械,动力刈草机和园圃设备.操作控制和其它显示符号.第3部分:动力刈草机和园圃设备符号 (TRACTORS, MACHINERY FOR AGRICULTURE AND FORESTRY, POWERED LAWN AND GARDEN EQUIPMENT. SYMBOLS FOR OPERATOR CONTROLS AND OTHER DISPLAYS. PART 3 : SYMBOLS FOR POWERED LAWN AND GARDEN EQUIPMENT. (EUROPEAN STANDARD EN ISO 3767-3).)
NF T45-024-1988 橡胶工业原料.不溶解硫 (RAW MATERIALS FOR THE RUBBER INDUSTRY. INSOLUBLE SULPHUR.)
NF T70-508-1995 军用高能材料.安全及易损性.爆燃到爆炸过程试验.BAM试验 (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. DEFLAGRATION TO DETONATION TRANSITION TEST.)
NF S52-329-8-1998 固定训练设备.第8部分:步进机,阶梯攀缘器和攀缘器.附加特殊安全要求和试验方法 (STATIONARY TRAINING EQUIPMENT. PART 8 : STEPPERS, STAIRCLIMBERS AND CLIMBERS. ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 957-8).)
NF M07-032-1966 碳氮燃料四甲基铅和四乙基铅含量的分别测定 (LIQUID FUELS. SEPARATE DETERMINATION OF TETRAETHYL LEAD AND TETRAMETHYL LEAD IN GASOLINE.)
NF V08-027-2003 食品和动物饲料的微生物学.推定的病源小肠结肠炎耶尔森菌检测的水平方法 (Microbiology of food and animal feeding stuffs - Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica.)
NF A10-101-1976 硅铁合金.硅锰铁合金及硅铬铁合金的化学分析.硅的重量法测定 (CHEMICAL ANALYSIS OF FERROSILICON,FERROSILICOMANGANESE AND FERROSILICOCHROMIUM. DETERMINATION OF SILICON. GRAVIMETRIC METHOD.)
NF C47-7321-1997 NF C 47-732-1992的补充件1 ()
NF X06-027-1987 测量不合格品比例法的检验.取样方案的设计导则 (INSPECTION BY MEASUREMENT OF THE PROPORTION OF NON CONFORMING ITEMS. GUIDANCE ON THE DESIGN OF A SAMPLING PROGRAMME.)
NF T60-185-1992 含水加工流体.发泡趋势 (AQUEOUS MACHINING FLUIDS. FOAMING TENDENCY.)
NF Z82-254-2003 专用综合业务网.规范、功能模型和信息流.支持辅助服务的建议 (Private Integrated Services Network (PISN) - Specification, functional model and information flows - Advice of charge supplementary services.)
NF C20-120-1968 28-47-5和6.3mm夹子用的簧片 (TAB TERMINALS FOR SNAP-ON CONNECTOR ASSEMBLIES DIMENSIONS OF TABS: 2.8,4.7,5 AND 6.3 MM.)
NF P34-205-2-1997 DTU 40.35.建筑工程.私人合同.涂覆钢板制压型钢板屋顶.第2部分:特别条款 (DTU 40.35. BUILDING WORKS. PRIVATE CONTRACTS. ROOFING WITH PROFILED SHEETING MADE OF COATED STEEL SHEET. PART 2 : SPECIAL CLAUSES.)
NF L22-184-1976 有BNAE十字槽120°埋头螺钉.国际单位米制螺纹 (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF T35-013-1992 涂料和清漆涂刷和干燥器具.涂料制备和使用工具用清洁设备的打开装置和关闭机械.设计、工作性能和测量方法 (INSTALLATIONS FOR APPLICATION AND DRYING OF PAINTS AND VARNISHES. OPEN EQUIPMENTS AND CLOSED MACHINES FOR CLEANING EQUIPMENTS FOR PREPARATION AND APPLICATION OF PAINTS. DESIGN,WORKING,CHARACTERISTICS AND MEASUREMENT METHODS.)
NF H44-028-1986 烟雾剂发生器.气雾剂阀.17mm皮碗 (AEROSOLS DISPENSERS. VALVES. FERRULE 17 MM.)
NF P38-601-1963 屋顶.塑料.玻璃纤瑗增强聚酯波形板.取样.批量验收或退货 (ROOFING. PLASTIC. CORRUGATED SHEETS IN GLASS REINFORCED PLASTIC. SAMPLING. BATCH ACCEPTANCE AND REJECTION.)
NF L22-186-1976 有BNAE十字槽锥顶扁头螺钉.国际单位米制螺纹 (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
NF C31-669-2001 特种绕组线规范.第19部分:涂覆聚酰胺的可焊接聚氨基甲酸乙酯漆包圆铜绕组线,130级 (Specifications for particular types of winding wires - Part 19 : solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130.)
NF L22-182-1976 有BNAE十字槽90°埋头螺钉.国际单位米制螺纹 (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
NF L65-132-1974 弹性装配小件的位置 (PEDESTALS FOR COMPACT SIZE FLEXIBLY MOUNTED FRAMES.)
NF C72-1056-1995 NF C72-105 88年6月补充件6 ()
NF C20-010/A1-2000 外壳的保护程度 (Degrees of protection provided by enclosures (IP Code).)
NF E71-015-1976 装配锤.尺寸范围 (TRIMMING HAMMER. DIMENSIONS.)
NF C73-85351-1996 NF C73-853-92补充件51 ()
NF D11-113-1989 卫生设备.带混合水系统的澡盆.特性 (SANITARY APPLIANCES. WHIRPOOL BATHS. REQUIREMENTS.)
NF G50-001-1976 皮革.生羊皮的缺陷词汇 (LEATHERS AND HIDES. DEFECTS IN THE RAW HIDES OF SHEEP. VOCABULARY.)
NF F16-101-1988 铁路车辆.防火性能.材料的选择 (ROLLING STOCK. FIRE BEHAVIOUR. MATERIALS CHOOSING.)
NF C63-1122-1999 1996年NF C 63-112补充件2 ()
NF F07-022-1992 铁路固定设备和车辆.电磁干扰.纵向感应的电动势测量 (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. MEASUREMENT OF LONGITUDINAL INDUCED ELECTROMOTIVE FORCE.)
NF C42-710-1988 照度计.计量特性的测定,按随时间进展的主要特性的检查、校准、及按计量特性进行分类 (PHOTOMETERS. DETERMINATION OF METROLOGICAL CHARACTERISTICS,CLASSIFICATION ACCORDING TO THE LATTER,CALIBRATION,CHECK OF THE MAIN CHARACTERISTICS LIABLE TO VARY WITH TIME.)
NF C63-4212-1997 1994年NF C 63-421的补充件2 ()
NF F00-079-1992 通用铁路设备.橡胶O型密封圈 (RAILWAY EQUIPMENT IN GENERAL. COMPACT-RUBBER “O“ RINGS.)
NF B53-601-4-1997 圆木和锯材.术语.第4部分:有关水含量的术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 4 : TERMS RELATING TO MOISTURE CONTENT. (EUROPEAN STANDARD EN 844-4).)
NF X51-001-1977 电缆、链和钩的合格证书和标志 (CERTIFICATION AND MARKING OF CABLES,CHAINS AND HOOKS. (ANNEXE TO THE DIRECTIVE OF 13TH APRIL 1976 OF THE COMMISSION OF THE EUROPEAN COMMUNITIES).)
NF Q12-006-1976 纸和纸板.平面纸板覆面用纸特性 (PAPER AND BOARD. CHARACTERISTICS OF CONTINUOUS COVERING PAPER FOR FLAT BOARD.)
NF G35-057-2003 铺地织物.机织绒头地毯和狭长地毯的分类 (Textile floor coverings - Classification of machine-made pile rugs and runners.)
NF B57-040-1974 软木.纯膨胀粘合体.密度的测定 (EXPANDED PURE AGGLOMERATED CORK. DETERMINATION OF BULK DENSITY.)
NF S75-501-1-1994 耐化学药品和微生物侵袭的防护手套.第1部分:术语和性能要求 (PROTECTIVE GLOVES AGAINST CHEMICALS AND MICRO-ORGANISMS. PART 1 : TERMINOLOGY AND PERFORMANCE REQUIREMENTS. (EUROPEAN STANDARD EN 374-1).)
NF S95-148-1997 麻醉气体检测器 (ANEASTHETIC GAS MONITORS. (EUROPEAN STANDARD EN ISO 11196).)
NF P18-306-1965 混凝土.粒状熔渣 (CONCRETES. GRANULAR SLAG.)
NF T90-048-1999 水质.用离子色谱法测定锂离子、钠离子、铵离子、钾离子、锰离子、钙离子、镁离子、锶离子和钡离子含量.水和 (WATER QUALITY. DETERMINATION OF DISSOLVED LI+, NA+, NH 4+, K+, MN 2+, CA 2+, MG 2+, SR 2+ AND BA 2+ USING ION CHROMATOGRAPHY. METHOD FOR WATER AND WASTE WATER. (EUROPEAN STANDARD EN ISO 14911).)
NF E90-406-1-2003 机械振动.评定神经官能紊乱用振动感知阈值.第1部分:指尖测量法 (Mechanical vibration - Vibrotactile perception thresholds for the assessment of nerve dysfunction - Part 1 : method of measurement at the fingertips.)
NF F55-650-1995 铁路固定设备.指示室内线路用导线 (RAILWAY FIXED EQUIPMENT. CONDUCTORS USED FOR INDICATING INDOOR CIRCUITS.)
NF P52-302-11-1999 NF P 52-302-1-1993的补充件1 ()
NF D35-345-2000 燃气中心加热锅炉.额定热输入不超过70KW的C型锅炉 (Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW.)
NF M07-034-1970 液体燃料.石油和石油馏出物雷德蒸气压的测定方法-微量法 (LIQUID FUELS. DETERMINATION OF THE REID VAPOUR PRESSURE OF PETROLEUM AND ITS DERIVATIVES BY THE MICRO METHOD.)
NF E27-455-1976 滚花螺帽 (KNURLED KNOB.)
NF G38-116-1996 土工织物.用大宽度法测定接头/接缝处的拉伸试验 (GEOTEXTILES. TENSILE TEST FOR JOINTS/SEAMS BY WIDE/WIDTH METHOD. (EUROPEAN STANDARD EN ISO 10321).)
NF D38-006-1961 家政学.家用冰箱.可使用面积的测定 (DOMESTIC ECONOMY. DOMESTIC REFRIGERATORS. DETERMINATION OF USEFUL SHELF AREA.)
NF E22-552-1986 滑动轴承.厚壁多层轴承合金底衬的要求? (PLAINS BEARINGS. REQUIREMENTS ON BACKINGS FOR THICK-WALLED MULTILAYER BEARINGS.)
NF S90-321-1986 外科医疗器械.蒸气消毒用包、套、软片和卷筒尺寸 (MEDICO-SURGICAL EQUIPMENT. BAGS,TUBE PACKINGS,SHEETS AND TOILS FOR STEAM-STERILIZATION. DIMENSIONS.)
NF P41-102-1942 配水.术语.污水排放 (WATER SUPPLY. TERMINOLOGY. SEWAGE DISPOSAL.)
NF L10-805-1993 航空和航天.钛及钛合金碎屑的回收利用? (AEROSPACE SERIES. RECYCLING OF TITANIUM AND TITANIUM ALLOY SCRAP. (EUROPEAN STANDARD EN 2955).)
NF P37-404-1967 屋顶附件.英国式接水槽用支架 (ROOFING ACCESSORIES. PROPPED GUTTER BRACKETS.)
NF E62-256-1976 机床构造标准部件.多轴头.3号和4号攻螺纹轴上的直齿主动齿轮 (MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. CONTROL STRAIGHT-TOOTHED PINIONS FOR TAPPING SPINDLES NO 3 AND 4.)
NF C31-410/A1-2000 测定漆包绕组线温度指数的试验规程 (Test procedure for the determination of the temperature index of enamelled winding wires.)
NF X10-330-1974 明渠中水流量的测定.测量站的建立和使用及高流量关系的测定 (LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - ESTABLISHMENT AND OPERATION OF A GAUGING-STATION AND DETERMINATION OF THE STAGE-DISCHARGE RELATION.)
NF P37-415-1967 屋顶附件.带钢制嵌有相应长度杆的螺栓卡箍 (ROOFING ACCESSORIES. STRIP METAL BOLT CLAMPS WITH INSERTED PIN.)
NF C93-7661-1996 NF C93-766-94补充件1 ()
NF V03-300-1987 袋装生咖啡豆.取样 (GREEN COFFEE IN BAGS. SAMPLING.)
NF T01-103-1997 铝工业用原材料.硬柏油脂,焦油沥青和胶粘剂.固定碳含量测定 (RAW MATERIALS AND MATERIALS FOR THE ALUMINIUM INDUSTRY. PITCHES, TARS AND IMPREGNATION BINDERS. DETERMINATION OF THE FIXED CARBON CONTENT.)
NF C86-219-1988 电子元件.CENELEC质量保证体系.前置TTL肖特基逻辑集成电路.系列规范 (HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. TTL ADVANCED SCHOTTKY DIGITAL INTEGRATED CIRCUITS. FAMILY SPECIFICATION. (CECC 90 108).)
NF P52-304-2-1993 建筑工程.私人合同.冷热生产单元和建筑物之间冷、热和家用热水传输设施.第2部分:特别条款 (DTU 65-9. BUILDING WORKS. PRIVATE CONTRACTS. INSTALLATIONS FOR TRANSPORTING HEAT OR COLD AND DOMESTIC HOT WATER BETWEEN HEAT AND COLD PRODUCTION UNITS AND BUILDINGS. PART 2 : SPECIAL CLAUSES.)
NF T51-553-1-1999 塑料.含氟聚合物的分散、模塑和挤制材料.第1部分:名称与符号系统及基本规范 (PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 12086-1).)
NF A92-020-1990 铝和铝合金用的搪瓷涂层.试样的制备 (VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM AND ALUMINIUM ALLOYS. PREPARATION OF TEST SAMPLES.)
NF E62-258-1976 机床构造标准部件.多轴头.偏心轮毂直齿轮 (MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. OFFSET BOSS STRAIGHT-TOOTHED PINIONS.)
NF Q03-043-1971 纸张和纸板试验.瓦楞纸板.组成瓦楞纸板的纸张克重的测定 (PAPER AND BOARD TESTS. CORRUGATED BOARD. METHOD FOR DETERMINATION OF THE GRAMMAGE OF THE COMPONENT PAPERS OF CORRUGATED BOARD.)
NF F01-373-2000 铁路设施.铁路车辆.冲击和振动试验 (Railway applications - Rolling stock equipment - Shock and vibration tests.)
NF C66-134-1969 架空线路用绝缘子和器材.陶瓷绝缘子(高压).标准端部的棒式绝缘子(CHT···C) (HIGH-VOLTAGE CERAMIC INSULATORS. SOLID ROD INSULATORS WITH CALIBRATED HEAD.)
NF P85-532-1992 连接产品.密封用釉料和化合物.粘滞油基密封剂.抗压特性测定 (JOINTING PRODUCTS. GLAZING MATERIALS AND COMPOUNDS FOR SEALING. PLASTIC-OIL BASED SEALANTS. DETERMINATION OF COMPRESSIVE STRENGTH CHARACTERISTICS.)
NF C97-4201-1980 NF C97-420 77年5月补充件1 ()
NF X20-215-1986 气体分析.校正混合的的制备.动态容量法.第4部分:连续注入法 (GAS ANALYSIS. PREPARATION OF CALIBRATION GAS MIXTURES. DYNAMIC VOLUMETRIC METHODS. PART 4 : CONTINUOUS INJECTION METHOD.)
NF T60-361-1980 工业甘油.取样的制备和分析方法.综合 (GLYCERINES FOR INDUSTRIAL USE. PREPARATION OF SAMPLES AND AVALYTICAL METHODS. GENERAL.)
NF P14-202-2000 整平板材料和地板整平.定义 (Screed material and floor screeds - Definitions.)
NF X60-210-1983 保养.附件目录的说明和编汇规则.编号原则 (MAINTENANCE. REQUIREMENTS FOR THE WORDING AND LAYOUT OF COMPONENT CATALOGUES. CODIFICATION PRINCIPLES.)
NF G07-090-10-1990 纺织.色牢度的试验.第10部分:贴衬织物规范:复型纤维(皮芯型纤维的组组合) (TEXTILES. TESTS FOR COLOUR FATNESS. PART 10 : SPECIFICATION FOR ADJACENT FABRIC : MULTIFIBRE.)
NF L14-204-1994 航空航天系列.铝合金AL-P7075-.T6或T62.0.4mm以下或等于6mm以下或等于6mm的覆层铝合金板材及带材 (AEROSPACE SERIES. ALUMINIUM ALLOY AL-P7075-. T6 OR T62. CLAD SHEET AND STRIP. 0,4 MM INFERIOR OR EQUAL TO A INFERIOR OR EQUAL TO 6 MM. (EUROPEAN STANDARD EN 2092).)
XP A35-045-3-2000 钢制品.预应力钢.第3部分:钢绞线 (Steel products - Prestressing steels - Part 3 : strand.)
NF C61-602-1969 家用和类似用途的设备器材.组合电器 (ACCESSORIES FOR DOMESTIC AND SIMILAR PURPOSES. COMPOSITE ACCESSORIES.)
NF C47-7322-1997 NF C 47-732-1992的补充件2 ()
NF P98-260-1-2000 与人行道有关的试验.沥青混合物中流变特性的测量.第1部分:用拉伸试验对非直线性和成模性的测定 (Test relating to pavements - Measurements of rheological properties on bituminous mixtures - Part 1 : determination of the modulus and of the lost linearity under direct traction (tensile test).)
NF C53-2222-1990 C 53-222-87的补充2 ()
NF T70-313-1995 军用高能材料.物理化学分析及特性.直接测量法测定线性热扩散系数 (ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. COEFFICIENT OF LINEAR THERMAL EXPANSION BY DIRECT MEASUREMENT.)
NF V32-158-1987 香料和佐料.芹菜籽.规范 (SPICES AND CONDIMENTS. CELERY SEEDS (APIUM GRAVEOLENS LINNAEUS). SPECIFICATIONS.)
NF C77-2104-1997 信息技术设备包括商用电器设备的安全.第4次修订 ()
NF P99-300-1997 道路交通数据.采集,存储,传播.测量和处理装置.交通数据和计量顺序的类型,准确性 (ROAD TRAFFIC DATA. DEVELOPMENT, STORING, DISTRIBUTION. MEASUREMENT AND PROCESSING UNITS. TYPE, ACCURACY OF TRAFFIC DATA AND METROLOGICAL SEQUENTIALITY.)
NF T70-500-1995 军用高能材料.安全及易损性.撞击敏感度.BAM试验 (ENERGETIC MATERIALS FOR DEFENSE. SAFETY, VULNERABILITY. DETERMINATION OF IMPACT SENSITIVITY. BAM TEST.)
NF T20-430-1976 工业氢氧化钠.氯化物含量的测定.光度法 (SODIUM HYDROXYDE FOR INDUSTRIAL USE. DETERMINATION OF CHLORIDES CONTENT. PHOTOMETRIC METHOD.)
NF T30-121-1974 涂料.干涂层厚度的测定.千分尺测量法 (PAINTS. DETERMINATION OF DRY FILM THICKNESS. MICROMETER METHOD.)
NF C18-40411-1997 NF C18-404的补充件11 ()
NF X31-551-1998 土壤质量.水保持特性的测定.实验室法 (SOIL QUALITY. DETERMINATION OF THE WATER RETENTION CHARACTERISTIC. LABORATORY METHODS.)
NF E35-411-1989 冷冻机.称为“open“的由外接电源驱动的冷冻设备发出的噪音.测定声音等级的检验规则 (REFRIGERATING MACHINE. NOISE EMITTED BY REFRIGERATION EQUIPMENTS WITH COMPRESSORS DRIVED BY EXTERNAL POWER UNIT CALLED “OPEN“. TEST CODE FOR MEASURING THE SOUND POWER.)
NF G60-004-1977 鞋.男式皮鞋楦.结构.检验.标记 (SHOES. HEEL LASTS FOR MEN`S TOWN SHOES. CONSTRUCTION. INSPECTION. MARKING.)
NF A51-080-1991 形状记忆合金.词汇和测量 (SHAPE MEMORY ALLOYS (SMA). VOCABULARY AND MEASURES.)
NF B51-300-1995 混凝土连接碎料板.硬体冲击阻力测定 (CEMENT-BONDED PARTICLEBOARDS. DETERMINATION OF HARD BODY IMPACT RESISTANCE. (EUROPEAN STANDARD EN 1128).)
NF C93-575-1968 空心波导管元件 (FLEXIBLE HOLLOW WAVEGUIDES.)
NF P18-621-5-2000 集料的一般特性试验.第5部分:通用设备和校准 (Tests for general properties of aggregates - Part 5 : common equipment and calibration.)
NF S94-402-1-1992 钝化剂、清洁剂或消毒剂对可再用的外科器械的腐蚀影响的测定.第1部分:金属器械 (EXAMINATION OF THE CORROSIVE EFECT OF A DECONTAMINANT, CLEANING AGENT OR DISINFECTANT ON REUSABLE MEDICO-SURGICAL INSTRUMENTS. PART 1 : METALLIC INSTRUMENTS.)
NF A89-430-2000 钎焊.钎焊接头的无损检验 (Brazing - Non-destructive examination of brazed joints.)
NF L22-070-1976 螺钉的BNAE型十字槽 (CROSS RECESS (B.N.A.E.).)
NF S30-001-1-2000 声学.测听设备校准用参照区.第1部分:纯音和耳挂式耳机的参考等效阈声压级 (Acoustics - Reference zero for the calibration of audiometric equipment - Part 1 : reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones.)
NF E75-208-1982 粘结研磨件.机械固定干面砂轮和粘着干面轮.尺寸和公差 (BONDED ABRASIVE PRODUCTS. MECHANICAL LOCKED OR FITTED LAPIDARY GRINDING WHEELS. DIMENSIONS AND TOLERANCES.)
NF A49-220-1990 钢管.高温用的无缝钢管.尺寸.交贷的技术条件 (STEEL TUBES. GROOVED SEAMLESS STEEL TUBES FOR USE AT HIGH TEMPERATURE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF T77-154-1987 工业硅树脂.硅烷三醇基的含量测定(硅烷三醇含量小于百分之0.5(m/m).气量计法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF SILINETRIYL RADICALS (SILANETRIYL CONTENT MORE THAN 0,5 PER CENT (M/M)). GASVOLUMETRIC METHOD.)
NF S91-175-2000 牙科起子.第4部分:Coupland起子 (Dental elevators - Part 4 : Coupland elevators.)
NF E62-220-1976 机床构造标准部件.多轴头.攻螺纹轴.通用系列.概论 (MODULAR UNITS FOR MACHINE TOOLS. MULTISPINDLE HEADS. TAPPING SPINDLES. NORMAL SERIES. GENERAL.)
NF D35-357-2000 专用液化石油气设施规范.车辆和小艇中安装的房间用密封式液化石油气空间加热设备 (Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats.)
NF R16-336-1992 注油设备.词汇.注油器 (FUEL INJECTION EQUIPMENT. VOCABULARY. FUEL INJECTORS.)
NF M81-813-1989 矿用提升钢丝绳.设计的技术条件 (LOCKED COIL WIRE ROPES FOR MINE HOISTING. TECHNICAL DELIVERY REQUIREMENTS.)
NF P75-303-1987 建筑物绝热材料.由刚性和半刚性绝热材料受潮产生的吸水性的测定.水排斥性 (MANUFACTURED THERMAL INSULATING MATERIALS FOR BUILDING PURPOSES. DETERMINATION OF WATER ABSORPTION BY ASPERSION OF THE RIGID AND SEMI-RIGID INSULATING MATERIALS. WATER REPELLENCY.)
NF Q50-005-1967 纸浆.制浆溶液中硫代硫酸钠含量的测定? (PULPS FOR PAPER. QUANTITY DETERMINATION OF SODIUM THIOSULPHATE IN PULP LIQUORS FOR PAPERMAKING.)
NF T20-242-1982 工业用液态氯.气化产品中氯的容积含量的测定 (LIQUID CHLORINE FOR INDUSTRIAL USE. DETERMINATION OF THE CONTENT OF CHLORINE BY VOLUME IN THE VAPORIZED PRODUCT.)
NF E66-209-1977 7/24锥形柄两面刃圆柱形铣刀.标准系列和长系列 (END MILLS 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.)
NF F55-617-1994 铁路固定设备.电路速度检测用信标用铠装电缆 (RAILWAY FIXED EQUIPMENT. ARMOURED ELECTRICAL CABLES FOR SPEED CHECK CIRCUITS USING BEACONS.)
NF A89-700-4-2000 焊接.电子束焊接机的认可检验.第4部分:焊接速度的测量 (Welding - Acceptance inspection of electron beam welding machines - Part 4 : measurement of welding speed.)
NF B53-601-9-1997 圆木和锯材.术语.第9部分:有关锯材特性的术语 (ROUND AND SAWN TIMBER. TERMINOLOGY. PART 9 : TERMS RELATING TO FEATURES OF SAWN TIMBER. (EUROPEAN STANDARD EN 844-9).)
NF C73-6001-1985 C73-600-80的补充1 ()
NF M07-054-2000 液化石油产品.无铅汽油.使用柱转换气相色谱法测定有机氧饱和化合物的含量和有机束缚氧的总含量 (Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching.)
NF C31-023-41-1998 NF C31-023-4-98的补充件1 ()
NF C20-003-71-1997 NF C 20-003-7-1995的补充件1 ()
NF P94-053-1991 土壤.检验与试验.实验细土密度测定.切样法、铸模法、浸水法 (SOILS INVESTIGATION AND TESTING. DETERMINATION OF DENSITY OF FINE SOILS. CUTTING CURB,MOULD AND WATER IMMERSION METHODS.)
NF V05-125-1982 水果.蔬菜及其制品,无火焰原子吸收光度法测定铅含量(参考法) (FRUITS,VEGETABLES AND DERIVED PRODUCTS. DETERMINATION OF THE LEAD CONTENT BY MEANS OF FLAMELESS ATOMIC ABSORPTION PHOTOMETRY.)
NF F76-026-1976 铁路固定设备.粗制插销螺栓.销 (FIXED RAILWAY INSTALLATIONS. TRACK SERVICE AND MAINTENANCE TOOLS. KEY-BOLTS. KEY.)
NF S31-083-3-1998 声学.听力测试方法.第3部分:语言测听术 (ACOUSTICS. AUDIOMETRIC TEST METHODS. PART 3 : SPEECH AUDIOMETRY. (EUROPEAN STANDARD EN ISO 8253-3).)
NF C83-1122-1990 C 83-112-88的补充2 ()
NF B54-020-2000 层压地板覆盖物.规范、要求和试验方法 (Laminate floor coverings - Specifications, requirements and test methods.)
NF S61-937-1990 防火安全系统.安全操作设备 (FIRE SAFETY. OPERATED SAFETY DEVICES.)
NF L21-214-1980 铝合金制120°半埋头铆钉(英寸) (RAISED 120 DEGREES COUNTERSUNK HEAD RIVETS IN ALUMINIUM ALLOYS. (RECH.).)
NF L09-005-1980 航空和航天设备的识别.技术档案中识别装置的使用规则 (IDENTIFICATION OF AEROSPACE COMPONENTS. RULES FOR THE USE OF THE IDENTIFICATION BLOCK IN DATA RECORDS.)
NF P78-331-1971 玻璃.镜子.亚麻油腻子 (LINSEED-OIL PUTTY.)
NF V45-067-1996 加工过的鱼.熏鱼片.规范 (PROCESSED FISH. SMOKED HERRING FILLETS. SPECIFICATIONS.)
NF V18-128-2000 动物饲料.有机磷杀虫剂残留的测定.气相色谱法 (Animal feeding stuffs - Determination of residues of organophosphorus pesticides - Gas chromatographic method.)
NF P34-206-1-1993 建筑工程.预涂漆铝板及铝板制成的成型屋顶覆盖物.第1部分:技术规范 (DTU 40-36. BUILDING WORKS. PROFILED ROOF COVERING MADE OF PREPAINTED ALUMINIUM SHEET OR ALUMINIUM SHEET. PART 1 : TECHNICAL SPECIFICATIONS.)
NF H34-017-1994 救援食品运输袋.合成薄膜管状包装袋 (SACKS FOR THE TRANSPORT OF FOOD AID. TUBULAR SACKS MADE OF COMPOSITE FILM. (EUROPEAN STANDARD EN 788).)
NF P62-116-1995 弹性覆面层.受潮卷曲的测定 (RESILIENT FLOOR COVERINGS. DETERMINATION OF CURLING ON EXPOSURE TO MOISTURE. (EUROPEAN STANDARD EN 662).)
NF T60-127-1974 石油产品.石油蜡和石蜡抗控强度的测定? (TENSILE STRENGTH OF PARAFFIN WAX.)
NF P98-250-3-1992 有关路面的试验.沥表混合料的制备.第3部分:混凝土路面试样 (TESTS RELATING TO PAVEMENTS. PREPARATION OF BITUMINOUS MIXTURES. PART 3 : SPECIMENS MAKING FROM A SLAB.)
NF L06-823-1988 航空和航天.喷丸.玻璃球 (AEROSPACE INDUSTRY. BLAST MEDIA. GLASS BEADS.)
NF A49-147-1980 钢管.一般用和管道用光端纵向焊接钢管.奥氏体不锈钢.(尺寸.交货技术条件.) (STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)
NF P98-251-4-1992 有关路面的试验.沥青混合物的静态试验.第4部分:乳化沥青的杜利埃试验.集料混合物 (TEST RELATING TO PAVEMENTS. STATIC TEST ON BITUMINOUS MIXTURES. PART 4 : DURIEZ TEST ON BITUMEN EMULSION. AGGREGATES MIXES.)
NF T81-051-1976 液态化学产品的运输与装卸.内河航行罐船.连接尺寸的统一 (TRANSPORTATION AND HANDLING OF LIQUID CHEMICALS. TANKERS FOR USE ON INLAND WATERWAYS. DIMENSIONAL UNIFICATION OF CONNECTIONS.)
NF A01-001-1960 冶金.锰矿或铬矿的取样 (SAMPLING OF MANGANESE OR CHROMIUM ORES.)
NF F01-802-1988 铁路车辆.分类和试验的定义 (ROLLING STOCK. CLASSIFICATION AND DEFINITION OF TESTS.)
NF T20-445-1976 工业碳酸氢钠.氯化物含量的测定.汞量滴定法 (SODIUM HYDROGEN CARBONATE FOR INDUSTRIAL USE. DETERMINATION OF CHLORIDE CONTENT. MERCURIMETRIC METHOD.)
NF L15-332-1972 铝合金拉制方棒材 (EXTRUDED AND DRAWN SQUARE BARS IN ALUMINIUM ALLOYS.)
NF T51-113-1976 塑料.耐划痕性能的测定 (PLASTICS. DETERMINATION OF THE RESISTANCE TO SCRATCHING.)
NF L59-715-1976 电子装置用有机清洗剂 (ORGANIC CLEANING SOLVENTS FOR USE ON ELECTRONIC EQUIPMENT.)
NF X10-113-1982 圆截面密封管道中液体流量的测定.剖面上一点流速的测定方法 (DETERMINATION OF FLOWRATE OF FLUIDS IN CLOSED CONDUITS OF CIRCULAR CROSS-SECTION. METHOD OF VELOCITY MEASUREMENT AT ONE POINT OF THE CROSS-SECTION.)
NF T60-121-1976 石油产品.矿脂、原矿脂和石油蜡常规焙点的测定 (DETERMINATION OF THE CONVENTIONAL MELTING POINT OF PETROLEUM JELLY,CRUDE PETROLEUM JELLY AND PETROLEUM WAX.)
NF T75-226-1976 香精油.荜橙茄香精油 (ESSENTIAL OILS. OIL OF CUBEB.)
NF P85-541-1992 连接产品.密封用釉料和化合物.粘滞油基密封剂.粘滞型密封剂.规范 (JOINTING PRODUCTS. GLAZING MATERIALS AND COMPOUNDS FOR SEALING. PLASTIC TYPE SEALANTS. SPECIFICATIONS.)
NF C61-44017-1999 1995年NF C 61-440的补充件17 ()
NF M60-780-4-1997 原子能.环境中放射能的测量.生物指示器.第4部分:样品制备用通用指南 (NUCLEAR ENERGY. MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT. BIOINDICATORS. PART 4 : GENERAL GUIDE FOR THE PREPARATION OF SAMPLES.)
NF S52-358-1998 登山设备.滑轮.安全要求和试验方法 (MOUNTAINEERING EQUIPMENT. PULLEYS. SAFETY REQUIREMENTS AND TEST METHODS. (EUROPEAN STANDARD EN 12278).)
NF A09-051-2003 无损检验.外观检验.设备 (Non-destructive testing - Visual testing - Equipment.)
NF E44-361-1999 旋转变容泵.技术要求 (ROTARY POSITIVE DISPLACEMENT PUMPS. TECHNICAL REQUIREMENTS. (EUROPEAN STANDARD EN ISO 14847).)
NF A05-661-2003 阴极保护测量技术 (Cathodic protection measurement techniques.)
NF A00-500-6-1999 铸造.交货技术条件.第6部分:锌合金铸件的附加要求 (FOUNDING. TECHNICAL CONDITIONS OF DELIVERY. PART 6 : ADDITIONAL REQUIREMENTS FOR ZINC ALLOY CASTINGS. (EUROPEAN STANDARD EN 1559-6).)
NF G37-117-1976 两面涂橡胶或塑料的织物.芯线效应测定? (FABRICS COATED ON BOTH SIDES WITH RUBBER OR PLASTICS. MEASUREMENT OF THE WICK EFFECT.)
NF C33-030-1999 电力系统用绝缘电缆及其辅助设备.额定电压0.6/1KV束状组合线圈和地下电缆的架空-地下连接件用连接设备 (INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS. JOINT EQUIPMENT FOR OVERHEAD-UNDERGROUND CONNECTIONS BETWEEN BUNDLE ASSEMBLED CORES AND UNDERGROUND CABLES, OF RATED VOLTAGE 0,6/1 KV.)
NF B10-506-1973 采石场产品.石灰石.表面硬度的测量(条纹的宽度) (QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF SURFACE HARDNESS. (GROOVE WIDTH).)
NF G35-031-1982 编织地毯.尺寸公差 (TEXTILES FLOOR COVERINGS. DIMENSIONAL TOLERANCES.)
NF P91-100-1994 公共停车场.功能标准.设计及尺寸 (PUBLIC CAR-PARKS. CRITERIA FOR FUNCTIONAL CAPABILITY. DESIGN AND DIMENSIONS.)
NF S31-041-1975 声学.农业机械和拖拉机司机座位上噪音的测定 (ACOUSTICS. MEASUREMENT OF THE NOISE AT THE WORKING POSITION OF THE OPERATOR OF AGRICULTURAL TRACTORS AND MACHINERY.)
NF P18-353-1985 混凝土、砂浆和灰浆添加剂.气量计测定新拌混凝土内封闭空气的百分比 (CONCRETE,MORTAR AND GROUT ADMIXTURES. MEASUREMENT OF THE PERCENTAGE OF ENTRAINED AIR IN FRESH CONCRETE USING AN AIR METER.)
NF P94-052-1-1995 土壤:研究和试验.Atterberg极限的测定.第1部分:液体极限中心贯入法 (SOIL : INVESTIGATION AND TESTING. ATTERBERG LIMIT DETERMINATION. PART 1 : LIQUID MIT. CONE PENETROMETER METHOD.)
NF A91-211-1994 热喷涂层的试验.胶粘剂抗拉强度的测定? (THERMAL SPRAYING. DETERMINATION OF TENSILE ADHESIVE STRENGTH. (EUROPEAN STANDARD EN 582).)
NF G01-003-1982 纺织.纱结构特性的名称 (TEXTILES. DESIGNATION OF YARN STRUCTURE CHARACTERISTICS.)
NF G91-109-1997 粘合拉锁.粘合拉锁的整体宽度和有效宽度及锁紧后拉锁的有效宽度的测定 (TOUCH AND CLOSE FASTENERS. DETERMINATION OF THE OVERALL AND EFFECTIVE WIDTHS OF TAPES AND THE EFFECTIVE WIDTH OF A CLOSURE. (EUROPEAN STANDARD EN 12240).)
NF A13-040-1976 铁合金.铬铁.规范 (FERRO-ALLOYS. FERROCHROMIUM. SPECIFICATIONS.)
NF T94-412-2003 人类生活用水处理用产品.干馏炭材料 (Products used for treatment of water intended for human consumption - Pyrolysed coal material.)
NF X10-522-1976 真空技术.电离压力计.校准.直接比较法? (VACUUM TECHNOLOGY. IONIZATION VACUUM GAUGES. CALIBRATION BY DIRECT COMPARISON.)
NF R81-305-1982 带皮软微孔塑料.人造光(氙灯)下汽车制造用塑料皮老化试验 (FLEXIBLE CELLULAR PLASTICS WITH SKIN. SKIN AGEING TEST UNDER ARTIFICIAL LIGHT (XENON LAMPS) FOR AUTOMOBILE CONSTRUCTION.)
NF C79-300-1968 工业机械的电气设备.机械效应的电磁设备.规则 (INDUSTRIAL ELECTRICAL APPARATUS. ELECTROMAGNETIC APPARATUS FOR MECHANICAL APPLICATIONS. REQUIREMENTS.)
NF X10-021-1972 弱导材料.导热率的测定.用对称取样保温热板法 (SLIGHTLY CONDUCTIVE MATERIALS. DETERMINATION OF THERMAL CONDUCTIVITY. METHOD USING GUARDED HOT PLATE WITH SYMMETRICAL SAMPLES.)
NF U43-005-1972 植物病药物产品.硫酸铜,要求 (PHYTOPHARMACEUTICAL PRODUCTS. COPPER SULPHATE. REQUIREMENTS.)
NF U43-004-1972 植物病药物产品.碳酸钠,要求 (PHYTOPHARMACEUTICAL PRODUCTS. SODIUM CARBONATE. REQUIREMENTS.)
NF C18-315-2000 带电作业.电压检测器.第3部分:双极低压检测器 (Live working - Voltage detectors - Part 3 : two-pole low-voltage type.)
NF C32-102-12-1999 额定电压达到和包括450/750V的橡胶绝缘电缆.第12部分:EPR芯和柔软电缆的热抗性 (RUBBER INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V. PART 12 : HEAT RESISTANT EPR CORDS AND FLEXIBLE CABLES.)
NF F11-412-1985 铁路车辆. 盘式制动器. 直径为590. 610和640盘用有机物质制动垫片 (RAILWAY ROLLING STOCK. DISK BRAKES. BRAKE LININGS,MADE OF ORGANIC MATERIALS,FOR DISKS OF DIAMETER 590,610 AND 640 MM.)
NF A06-726-1992 铜化学分析.硫含量测定.感应炉内燃烧后红外吸收法 (CHEMICAL ANALYSIS OF COPPER. DETERMINATION OF SULPHUR CONTENT. INFRARED ABSORPTIOMETRIC METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE.)
NF E51-711-1991 机械控制通风装置(VMC).机械控制通风装置的排气口.规范.规范符合性的检验 (CONTROLLED MECHANICAL VENTILATION (VMC) COMPONENTS. EXTRACT AIR TERMINAL DEVICES FOR VMC-GAS. CHARACTERISTICS. CHECKING OF COMPLIANCE WITH THE CHARACTERISTICS.)
NF P75-221-1999 建筑业用隔热材料.特定温度和湿度条件下湿气平衡的调节 (THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. CONDITIONING TO MOISTURE EQUILIBRIUM UNDER SPECIFIED TEMPERATURE AND HUMIDITY CONDITIONS. (EUROPEAN STANDARD EN 12429).)
NF T46-028-1976 橡胶.硫化橡胶低硬度(10-35D.I.D.C.)的国际硬度试验 (VULCANIZED RUBBERS OF LOW HARDNESS (10 TO 35 IRHD). DETERMINATION OF HARDNESS.)
NF F33-500-2-2004 铁路设施.新型和改造的货运车辆的测量.第2部分:带平衡悬架的货运车 (Railway applications - Measuring of new and modified freight wagons - Part 2 : freight wagons with bogies.)
NF T76-203-2001 结构胶粘剂.储存.与结构胶粘剂和相关材料产品寿命有关的词和词组的确定 (Structural adhesives - Storage - Determination of words and phrases relating to the product life of structural adhesives and related materials.)
NF Q15-005-1976 纸和纸板.涂胶用原纸特性 (PAPER AND BOARD. CHARACTERISTICS OF BACKING PAPER FOR COATING.)
NF E27-215-1976 带六角螺母的锁紧螺钉 (LOCKING SCREWS WITH HEXAGON NUT.)
NF T43-011-1992 聚丁橡胶.溶液聚合型.评定方法 (RUBBER, BUTADIENE (BR). SOLUTION-POLYMERIZED TYPES. EVALUATION PROCEDURE.)
NF P16-330-4-2000 建筑物集水沟.第4部分:入口盖 (Gullies for buildings - Part 4 : access covers.)
NF X06-048-3-2003 检测能力.第3部分:在无校准数据可采用情况下测定反应变量关键值的方法 (Capability of detection - Part 3 : methodology for determination of the critical value for the response variable when no calibration data are used.)

[1]

 

< 返回 >

合作企业及完成项目

联系我们

上海浦传翻译有限公司

 

国内公司联系方式
地址:上海市浦东新区川沙城南路747弄19号
邮编:201107
免费电话:400-080-6011
移动电话:86-151-0218-8443
Email:service#at#pure-trans.com
QQ:1649926125
网址:www.pure-trans.com

 

韩国办事处联系方式

韩国首尔市广津区紫阳4洞16-25号
电话:0082-2-461-3255
手机:0082-10-5872-7780
QQ:1437215665

 


联系地址:上海市浦东新区川沙城南路747弄19号 邮编:201107 电话: 400-080-6011 传真:
COPYRIGHT @ 上海浦传翻译有限公司版权所有。 ALL Right Reserved 沪ICP备11021976号